Operation Manual

74
Timer operation
Application section
Setting an everyday timer program (PROG. TIMER)
In each of PROG.1 and PROG.2, the timer data including the operating period and played contents can be
set and selected to be activated or not as required.
÷ Two timer settings can be reserved independently in two programs PROG.1 and PROG.2.
÷ Please make reservations with an interval of at least one minute, so that the operation times of PROG. 1 and PROG. 2
do not overlap.
Make preparations for the play (recording).
Select the timer number.
Continued on next page
Turning the knob switches the display contents.
1 "O. T. T. SET ?"
2 "PROG. 1 SET ?"
3 "PROG. 2 SET ?"
÷ The previously set contents are displayed. (If you do not
want to change them, simply press the set/demo key.)
÷ When a timer setting has already been made in the se-
lected timer, the setting will be overwritten by the new
setting.
1 Select "TIMER SET ?".
2 Select "PROG. 1 SET ?" or
"PROG. 2 SET ?".
3 Set it.
(Press during display of the program contents.)
(Press the set/demo key while the "?" mark is
blinking.)
Adjust the clock before setting the timer ∏
Connect the related equipment under reference to “System connection” 6 ~ 8
1
2
volume / multi control
set / demo
PROG.1 SET?
menu set / demo
volume / multi control
\
\
\
\
Turning the knob switches the display contents.
"TAPE RVS. ?"
"MD REC MODE "
"REC SPEED ?"
"REC OPTIONS"
"AUTO PRESET" or "AUTO MEMORY"
(Only when the TUNER input is selected)
"AUX INPUT ?"
(Only when the AUX input is selected)
"TIMER SET ?"
"A.P.S. SET ?"
Playing the auxiliary input source
To listen to radio
To listen to CD
The station should be preset
prior.
∞
Insert a disc.
(Program playback is not possible.)
Set a tape into.
To listen to MD
Load a disc.
(Program playback is not possible.)
To listen to tape
Make timer setting of the compo-
nent connected to the AUX input
jacks.
For recording
Make preparations for recording.
MD º
TAPE ›