MICRO HI-FI COMPONENT SYSTEM HM-DV5 HM-DV6 INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area.
Before applying power Before applying power Caution : Read this page carefully to ensure safe operation. Units are designed for operation as follows. Europe and U.K. .......................... AC 230 V only For the United Kingdom Preparation section Factory fitted moulded mains plug 1. The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS1362) fuse. 2. The fuse cover must be refitted when replacing the fuse in the moulded plug. 3.
Before applying power 3 Special features Versatile DVD VIDEO Functions Multi-audio function: With DVD discs marked with the 8 icon, the desired language can be played back by selecting it from up to 8 languages. (The number of available languages is variable depending on the discs.) Multi-subtitle function: With DVD discs marked with the 32 icon, the subtitle language can be selected from up to 32 languages. (The number of subtitle languages is variable depending on the discs.
Before applying power Unpacking Unpack the unit carefully and make sure that all the accessories are present. If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing materials in case you need to move or ship the unit in the future. Keep this manual handy for future reference.
Before applying power 5 Contents Caution : Read the pages marked carefully to ensure safe operation. Preparation section Before applying power ............................................ 2 Safety precautions .............................................................. 2 Special features .............................................................. 3 System connection ......................................................... 6 Controls and indicators................................................
System connection System connection Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections have been made properly, reset the microcomputer referring to "In case of difficulty". Á Connection of the System Accessories Connect the antenna as shown in the figure. Do not plug the power cord into a wall AC outlet until the connection has been completed.
System connection 7 Connection of speakers ÷ Never short-circuit the "+" and "-" speaker cords. The protection circuit will operate and no sound will be put out. ÷ The "+" and "-" polarity are inverted, the sound will be unnatural with unclear localization of musical instruments.
System connection Connection of Other Accessories (Commercially Available Parts) When connections are to be made, make sure that the power plug is not plugged into a wall AC outlet. Connect the equipment as shown in the figures. To Connect a TV Set initial setup "TV Aspect" according to the aspect ratio (4:3 or 16:9) of your TV. fl If the TV has an S Video input connector, connect the VIDEO OUT S-VIDEO connector of the player to it using the provided S Video cord.
System connection 9 Connection of external source component Analog signal connection The AUDIO CD-R IN/CD-R OUT (AUDIO AUX IN) input jacks on the rear panel can be used to connect a cassette deck, etc. audio output Cassette deck etc. 2 3 0 7 1 ¡ 8 ¶ audio input PCM/BIT STREAM L Optical digital audio input R AUX IN CD - R OUT CD - R IN AUDIO S-VIDEO VIDEO VIDEO OUT OPTICAL DIGITAL OUT Optical fiber cable * * Digital outputs are available only from DVD, VCD and CD.
Controls and indicators Controls and indicators Main unit 1 2 3 4 VOLUME/ MULTI CONTROL STANDBY /TIMER DVD/CD 6 TUNER/BAND Preparation section 4 P.CALL ¢ 5 AUX SOUND MODE SET/DEMO REPEAT 1 ¡ DVD/CD 0 STOP 7 RANDOM TUNING MODE PHONES 8 1 7 6 key TUNER/BAND key When power is ON: Press to set the unit to ON or STANDBY. )UP Press to select the tuner input. ª STANDBY/TIMER indicator When power is OFF (standby): When power is ON : Goes off.
Controls and indicators 11 STOP7/TUNING MODE key REPEAT key When power is OFF (standby): Press for repeat playback of a DVD (VCD, CD, MP3). W Press to display the time of the day for 5 seconds. % During DVD (VCD, MP3, CD) playback : RANDOM key Press to stop playback. Press to play the tracks in a CD (VCD) in a random During tuner reception: oder. Press to switch the tuning mode of the tuner.
Controls and indicators Operation of remote control unit 3 SET key p Press to set or enter a program. Cursor keys (2 3 5 ∞) Press one of these keys to select an item in the initial setup or other menu. ENTER key During tuner reception: Press to enter a manual preset station. POWER 7 2 SLEEP 1 2 3 DISPLAY 4 5 6 PGM/PTY 7 8 9 CLEAR + 100 0 + 10 SET When a setting menu is displayed, press to return to the previous display page. ‹fl T AUX key 8 4 P.CALL DOWN 4, P.
Controls and indicators 9 REPEAT key VIRTUAL SURROUND key Press to switch Virtual Surround on and off. ∞ Press for repeat playback of a DVD (VCD, CD, MP3). W 6 MUTE key ¡ Press to mute sound temporarily. 7 POWER ( 8 TIME key 13 RANDOM key Press to play the tracks in a CD (VCD) in a random order. R ) key When "DVD/CD" input is selected: Press to switch the time information displayed during DVD (VCD, CD) playback. • DISPLAY key Press to switch the display mode of the display panel.
Controls and indicators Display 1 2 3 MUTE 1 A 3 B PGM F RANDOM O.T.T. 1 2 Preparation section 0 9 4 5 P.B.C. TOTAL REMAIN AUTO TUNED FM PM AM 6 ST. 7 RDS SURROUND P.S.A. NB 1 2 MHz kHz 8 1 Play(3)/Pause(8) indicator 2 MP3 indicator 6 RDS indicator 7 Tone related indicators .... Folder .... File 3 MUTE indicator 4 P.B.C. indicator 5 Playback/Clock display/Tuning indicators (Play time, Clock display, Frequency display, etc.
Clock adjustment Controls and indicators 15 This unit incorporates a clock function. Be sure to adjust the correct time before using the timer function. If there is a power failure or the power cord is unplugged then plugged in again while the power set to off (STANDBY mode) after a timer is activated, the STANDBY/TIMER indicator blinks in amber. In this case, adjust the clock again. Switching the power ON 1 Activate the clock adjustment mode. 1 Press the MODE key.
Video Formats Playable Disc DVD VCD The TV picture display and disc signal systems can be divided roughly into two TV formats (NTSC and PAL). They are variable depending on countries and areas. This unit reproduces NTSC discs in NTSC format and PAL discs in PAL format. If the video formats of the disc and TV do not match, the disc cannot be reproduced correctly. It is therefore required to select the disc according to the TV set in use (country and area).
Playable Disc Playable Disc Operation restriction according to the disc or player status 17 DVD VCD Operations of some DVDs and VCDs are restricted by the intention of the software producers. Operations may also be restricted due to the status of the player. As this player plays discs in accordance with the intentions of software producers, some functions may not work as intended by the user. Be sure to read the manual provided with the disc to be played.
Playable Disc Region Codes of This Player DVD Preparation section A region code defined for each country or area is assigned for each DVD VIDEO player, so it cannot play a DVD VIDEO disc if its region code do not match that of this unit. Also, a disc which does not contain any region code may sometimes be unable to be played on the player. When purchasing a DVD VIDEO disc, make sure that it has a region code which can be played on your player.
Playable Disc Configuration of Discs DVD VCD CD 19 MP3 DVD VIDEO disc configuration DVD VIDEO disc Title 1 Chapter 1 Title 2 2 3 4 5 Chapter 1 2 The title is the largest unit composing the music and/or pictures in an DVD VIDEO disc. Each title is composed of multiple chapters. MP 3 disc Folder 1 Folder 2 2 3 4 5 File 1 File 6 7 2 The folder is the storage unit at the highest level in the disc.
Basic use method Basic use method Switching the power ON (OFF) Tone adjustment Balance adjustment Bass and treble compensation 3 VOLUME/ MULTI CONTROL Bass and treble compensation 1 2 DVD/CD 6 TUNER/BAND 5 5 5 STANDBY /TIMER 5 4 P.CALL ¢ 1 DVD/CD 0 AUX SOUND MODE SET/DEMO REPEAT ¡ STOP 7 RAMDOM TUNING MODE Muting the sound temporarily 1. Switching the power ON (OFF). Pressing the key when the unit is ON turns it off (Standby mode of power).
Basic use method Muting the sound temporarily Bass and treble compensation (NB : Natural Bass circuit) Remote control unit only Blinks SOUND MUTE MUTE ÷ Press again to resume the original volume. ÷ This is also cancelled when the volume is changed. Tone adjustment Remote control unit only The responses of the lowest frequencies (BASS) and highest frequencies (TREBLE) can be adjusted as desired.After this adjustment, the N.B. effect will be disabled. 1 Press the TONE key to select "BASS".
Playback Basic use method The following procedure shows how to play a disc, such as a CD, VCD or DVD, from the beginning. When playing a VCD with P.B.C. (Play-Back Control) capability, please read "Menu playback of P.B.C.-compatible VCD". ‹ For details on the MP3 discs containing MP3 files, see "MP3 that can be played back with this equipment".
Basic use Playback method FOLDER - SEARCH - FILE TOPMENU MENU/P.B.C. \ 5 5 3. Select the desired items from the menu screen. When a DVD VIDEO containing the recording of the top menu or menu is played, the top menu or menu is displayed. These menus allow you to select the position you want to play easily based on an interactive method. The following operation procedure is the basic procedure.
Basic use Playback method Slow playback and reverse slow playback DVD VCD Press the 1 key or ¡ key in still mode to select one of 5 available speeds. Remote control unit only Reverse slow playback TUNING DOWN 1 Slow playback ¶ When OSD is displayed, pressing the ON SCREEN key turns it off and shows the speed in place. ¶ Audio is not output during slow playback or reverse slow playback. ¶ Reverse slow playback is not available with VCD. ¶ Press the DVD/CD 6 key to resume normal playback.
Basic use Playback method Playing discs by selecting the title, chapter, track, folder or file Remote control unit only Select the desired track No. 1 2 3 4 5 6 7 8 9 + 100 0 + 10 Virtual Surround function DVD VCD CD 25 MP3 Press the numeric keys as shown below.... To select track 23 ........................... +10, +10, 3 To select track 40 ........................... +10, +10, +10, +10, 0 To select track 311 (MP3 disc only) .........
Basic use Playback method Basic OSD Operation DVD VCD CD MP3 Various operations can be performed by selecting the OSD icons on the TV screen using the cursor key (2 3 5 ∞) on the remote. The OSD cannot be displayed when DVD VIDEO, VCD is played by menu playback. It may also be unavailable with certain discs. Select the "DVD/CD" input. ™ 1 Press the ON SCREEN key.
Basic use Playback method Icons on the TV screen DVD VCD CD 27 MP3 Information related to the disc (title, chapter, time, voice language, subtitle language, angle, etc.) or the player can be displayed and changed as required. The icons displayed on the TV screen are as shown below. During DVD VIDEO playback "MAIN" OSD : 1 T O TA L -2 8 : 4 0 1 Dolby ENG 2 ch SOUND 2 3 Off 4 5 Shows the title number in DVD VIDEO disc. Chapter icon Shows the chapter number in DVD VIDEO disc.
Basic use Playback method Time display for DVD/CD player DVD VCD CD MP3 Use the following procedure to switch the type of information shown by the time display shown in the OSD or player display. Time search is also available for specifying the position to start playback by inputting the time information. The time display information type can also be changed using the TIME key. However, time search is not possible.
Receiving broadcast station 29 Receiving broadcast station One-by-one presetting (3) ⁄ Collective presetting of stations º One-by-one presetting (2,4) ⁄ VOLUME/ MULTI CONTROL STANDBY /TIMER 1 5 5 5 DVD/CD 6 TUNER/BAND 3 5 4 P.CALL ¢ 1 DVD/CD 0 Tuning a non-preset radio station (2) ⁄ AUX SOUND MODE SET/DEMO REPEAT ¡ STOP 7 RAMDOM TUNING MODE Tuning a non-preset radio station (1) ⁄ 1. Select the tuner input.
Receiving broadcast station Collective presetting of stations Main unit only Up to 40 stations can be memorized. 1 Receive a broadcast. ÷ The previously preset frequencies are overwritten. ÷ When there are many stations and the intended station has not been preset, please also use "One-by-one presetting (Manual preset)". ⁄ TUNER/BAND 2 Press of the MODE key. MODE 3 Turn the VOLUME/MULTI CONTROL knob to select "AUTO MEMORY", then press the SET/DEMO key. VOLUME/ MULTI CONTROL Basic section \ SE
Receiving broadcast station 31 Tuning a non-preset radio station (Auto tuning, Manual tuning) Select the tuning mode according to the radio wave receiving condition. When the receiving condition is good: AUTO mode When it is poor due to weak radio waves: MANUAL mode 1 Select the AUTO or MANUAL mode. ÷ In MANUAL mode, FM stations are received in monaural. Each press alternates the mode.
Menu playback Menu playback of DVD Menu playback DVD When a DVD containing the recording of the top menu or menu is played, the top menu or menu is displayed. These menus allow you to select the position you want to play easily based on an interactive method. The following operation procedure is the basic procedure. The functions vary depending on certain softwares. Select the "DVD/CD" input. ™ 1 Press the TOP MENU/ FOLDER SEARCH key. FOLDER - SEARCH - FILE TOPMENU MENU/P.B.C.
Menu playback Menu playback of P.B.C.-compatible VCD 33 VCD When a P.B.C. (PlayBack Control) capable VCD is played with P.B.C. on, the menu is displayed. Perform operation according to the procedure indicated by the menu. (For details on the operation method and control keys, refer to the manual provided with the played software.
MP3 that can be played back with this equipmentMenu playback This unit is capable of playing back the music files recorded in the MP3 audio compression format on CD-R/RW discs. This unit may also be incapable of playing certain CD-R/RW discs depending on their properties, recording conditions, etc. ¶ Please set up the transfer bit rate setting for the compression software when compressing MP3 files as follows: MP3 file: 128kbps recommended (32 kbps-320 kbps) ¶ This unit is compatible with 32kHz, 44.
MP3 that can be played back withMenu this equipment playback Searching a desired folder/file by its title 35 MP3 MP3 files can be searched based on the title of the file or the folder containing the file. Select the “DVD/CD” input ™ 1 Press the TOP MENU/FOLDER SEARCH key. FOLDER - SEARCH - FILE TOPMENU MENU/P.B.C. PGM Blinks F O.T.T. 1 2 ÷ If file search is required, press the MENU/P.B.C./FILE SEARCH key instead.
Changing the initial setup (DVD) Changing the initial setup äeéÌê›íË (DVD) "MAIN" Setting The setups according to the connected TV, viewing restriction, OSD position, on-screen messages and IPB display can be set. When "MAIN" is selected in "SET UP MENU" : "Rating" Setting Sets the viewing restriction of DVD VIDEO. (This functions only with DVD VIDEO discs compatible with viewing restriction.) "TV Aspect" Setting Sets the picture aspect ratio according to that of the connected TV.
Changing the initial setup (DVD) 37 3 Change the content of the selected item. Press either cursor key (5 ∞) to change the setting, then press the ENTER key. MAIN Rating 7 TV Aspect 7 4:3 TV Mode 7 16:9 OSD Position On Screen Message IPB Display 5 \ ENTER 5 ÷ Select " " and press the ENTER key to return to the setting menu. (Pressing the RETURN key or cursor (2) key also returns to the previous setting menu.
Changing the initial setup (DVD) Function items Setting items "On Screen Message" "On" : Select to display on-screen messages. "Off" : Select to not to display on-screen messages. "IPB Display" "On" : Select to view the IPB display. "Off" : Select to not to view the IPB display. If the power is turned off while the setup screen remains displayed after setting changes, the changes will be invalid. Be sure to close the setup screen before turning power off.
Changing the initial setup (DVD) 39 "SOUND" Setting "SOUND" is to be selected when you want to set the audio output method when system components are connected using the digital audio output connector of the player. Also select "SOUND" to set audio output during DVD or VCD search and dynamic range control function. When "SOUND" is selected in "SET UP MENU": "Digital Audio PCM Down Conversion" Setting Switches on/off the down-sampling conversion for the digital signal output with a high sampling rate.
Changing the initial setup (DVD) 3 Change the content of the selected item. SOUND Press either cursor key (5 ∞) to change the setting, then press the ENTER key. Digital Audio 7 PCM Down Conversion 7 On Dolby Digital 7 Off DTS MPEG Audio During Search 5 Dynamic Range Control \ ENTER 5 ÷ Select " " and press the ENTER key to return to the setting menu. (Pressing the RETURN key or cursor (2) key also returns to the previous setting menu.
Changing the initial setup (DVD) Function items "Audio During Search" "Dynamic Range Control" 41 Setting items "On" : Select to output audio during search. "Off" : Select to mute audio during search. "Wide" : Select to reproduced the audio at the level recorded in the disc. "Normal" : Select to reduce the difference between the maximum and minimum volume levels. "Midnight" : Select to further reduce the difference between the maximum and minimum volume levels.
Changing the initial setup (DVD) "VISUAL"Setting Select "VISUAL" when you want to change the language used to display the menu screens, language use in menus on the disc, audio language, subtitle language, etc. (If the selected language is not used in a specific disc, the language specified as the priority language for the disc will be used.) Also select "VISUAL" to set the still mode and video format conversion system.
Changing the initial setup (DVD) 43 3 Change the content of the selected item. Press either cursor key (5 ∞) to change the setting, then press the ENTER key. VISUAL Player Menu Language 7 Disc Menu Language 7 Auto Audio Language 7 Frame Subtitle Language 7 Field Still Mode 5 NTSC = PAL \ ENTER 5 ÷ Select " " and press the ENTER key to return to the setting menu. (Pressing the RETURN key or cursor (2) key also returns to the previous setting menu.
Changing the initial setup (DVD) Function items "Subtitle Language" Application section (The languages displayed with this setting item are variable depending on country and area.) Setting items "Auto" : The subtitle language is selected automatically according to the "Audio language" setting. Case in which subtitles are not displayed: When the voices are reproduced in the language selected with "Audio language", the subtitles are not displayed.
Changing the initial setup (DVD) 45 Disc Language Code Table Cord No. Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bengali; Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish Scots Gaelic Galician Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua Indonesian Icelandic Italian Hebrew Cord No.
R.D.S. (Radio Data System) RDS is a system that transmits useful information (in the form of digital data) for FM broadcasts along with the broadcast signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions, such as automatic display of the station name. Receiving broadcast station R.D.S. (Radio Data System) For reception of RDS stations, the RDS auto presetting function must be used to preset the stations.
R.D.S. (Radio Data System) 47 Searching for a desired program type (PTY search) By specifying the type of program (genre) you want to listen to, the tuner automatically searches for a station which is currently broadcasting a program of the specified type. Under certain receiving conditions, it may take more than 1 minute to complete the search. For reception of RDS stations, the RDS auto presetting function must be used to preset the stations. º Set the reception band to FM.
R.D.S. (Radio Data System) 3 Start the search. EXAMPLE: Searching for a Rock Music broadcast. Press the PGM/PTY key. Blinks Display while searching PGM/PTY AUTO TUNED HIGH ROCK M ST. RDS SURROUND P.S.A. FM 1 2 MHz kHz Program type name display. When a station is received. Goes off To change to a different program type : Repeat steps 1, 2, 3. Application section ÷ No sound is heard while "ROCK M" is blinking.
R.D.S.
Various playback features Various playback features Listening to the desired sequence (program playback) VCD CD Desired tracks in a disc can be programmed in the desired order and played back. (Program playback is not available with DVD VIDEO.) Select the "DVD/CD" input. ™ 1 Check that the unit is in the stop mode. If is in play mode Press the STOP 7/AUTO/MONO key. STOP AUTO/MONO 7 ÷ If P.B.C. is On, be sure to set it to Off. ‹ 2 Light the "PGM" indicator.
Various playback features 51 To add a track to an existing program 1 Select the track number to be added with Blinks the numeric keys. Press in stop mode CD 1 2 3 4 5 6 7 8 9 + 100 0 + 10 P07 T03 Press the numeric keys as shown below.... To enter track No. 12 ... +10, 2 To enter track No. 40 ... +10, +10, +10, +10, 0 2 Press the SET key. SET ÷ Up to 32 tracks can be programmed. When "PGM FULL" is displayed, no more tracks can be programmed. ÷ When a track No.
Various playback features Repeated playback Repeat playback allows you to play the desired audio or video repeatedly. With some DVDs and VCDs, the partitions in the recording are not related with the track number assignment. As a result, repeat playback may not be available with such software. (Repeat playback may also be unavailable during playback of DVD or P.B.C. playback of VCD.) Select the "DVD/CD" input.
Various playback features To repeat selected tracks VCD CD 1 Program the desired tracks by performing the procedure in "Listening to the desired sequence (program playback) " until step 3. p HIGH PGM F RANDOM O.T.T. 1 2 2 Start playback. CD P01 T18 DVD/CD 6 3 Press the REPEAT key to select " To stop repeated playback ". RA Press the REPEAT key repeatedly until any repeat-related indicator disappears or press the STOP7/TUNING MODE key.
Various playback features Playing tracks in a random order (random playback) VCD CD As the titles each time are selected randomly, the music can be enjoyed without getting tired of it. Select the "DVD/CD" input. ™ 1 If the "PGM" indicator is lit, turn it off by pressing the PGM/PTY key in stop mode to cancel the program mode. PGM/PTY ÷ If P.B.C. is On, be sure to set it to Off. ‹ 2 Start random playback. O A 3 B PGM RANDOM O RANDOM ÷ Playback stops after each title has been played once.
Listening to an AUX input source Timer operation Connect the related equipment under reference to "Connection of external source component" 55 9 1 Press the AUX key. Each press switch the modes as follows. 1 "CD-R" (Analog) 2 "AUX" (Analog) AUX 2 Play the connected equipment. 3 Adjust the volume. VOLUME/ MULTI CONTROL Adjusting the AUX Input Level This adjusts the input level for the external equipment (video deck etc.) connected to the AUDIO CD-R IN(AUDIO AUX IN) terminal.
Timer operation Timer operation The timer makes it possible to play a CD, receive radio automatically in the specified time zone. The O.T.T. timer works only once when it is activated, the SLEEP timer switches power off (Standby mode) automatically even after you fall asleep, and the PROG. timer provides two timer programs which work every day once they are activated. Sleep timer (SLEEP) The unit is turned OFF automatically after the specified period has elapsed. Setting the O.T.T.
Timer operation 57 Setting the O.T.T. timer Timer playback which occurs only once and only for an hour can be programmed by simply setting the start time. The timer playback reproduces the source selected at the last time the unit is turned off at the last set volume. It is not recommended to play a DVD VIDEO or VCD disc using the timer function, for expected playback may sometimes unavailable with these discs.
Timer operation Setting an everyday timer program Two timer programs (PROG.1, PROG.2) are available. Both of them are 24-hour timer programs which can be executed every day. In each of PROG.1 and PROG.2, the timer data including the operating period and played contents can be set and selected to be activated or not as required. ÷ It is possible to execute both timer reservation programs PROG.1 and PROG.2 simultaneously. ÷ The time zones of PROG.1 and PROG.
Timer operation 59 4 Make the desired reservation. For timer playback or AI timer playback 1 Select the mode. (1) Select "PLAY" or "AI PLAY". 1 "PLAY" UME/ TROL (Timer play) \ 2 "AI PLAY" (Timer play with gradually increasing volume) SET/DEMO (2) Set it. 2 Select the input source. (1) Select the source to be played. UME/ TROL \ SET/DEMO 1 "TUNER" (Broadcasts) 2 "DVD/CD" 3 "CD-R" (Analog) 4 "AUX" (Analog) (2) Set it. 3 Select the broadcast station (only when TUNER is selected above).
Timer operation 5 Reserve the timer operation. Turn the VOLUME/MULTI CONTROL knob to select "ON", then press the SET/ DEMO key. PROG.1 VOLUME/ MULTI CONTROL > ON SET/DEMO \ ÷ When the timer setting is completed by pressing the SET/DEMO key, "COMPLETE" is displayed. ÷ Use the same procedure as above when you want to reserve a program timer operation in PROG.2. 6 Adjust the volume. 7 Put the unit in standby mode.
Important Items In case of difficulty 61 Maintenance Maintenance of the unit In regard to contact cleaner When the front panel or case becomes dirty, wipe with a soft, dry cloth. Do not use thinner, benzine, alcohol, etc. for these agents may cause discoloration. Do not use contact cleaners because it could cause a malfunction. Be specially careful not to use contact cleaners containing oil, for they may deform the plastic component.
Important Items In case of difficulty Disc handling precautions Handling Hold the disc so that you do not touch the playing surface. Label side Playing side Sticker Do not attach paper or tape to either the playing side or the label side of the disc. Never play a cracked or warped disc During playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent.
In case Important of difficulty Items 63 Glossary DVD (Digital Versatile Disc) : DVD VIDEO is a disc fea- Quantization bit : The quantization bit count refers turing high video/audio quality, made possible by large to the number used in digitizing the sliced parts recording capacity of video and audio signals of movie obtained by slicing the analog signal as described software, etc. and by digital signal processing. above.
In case Important of difficulty Items Track/Track No. ( VCD, CD): A track is also a sec- Letterbox (DVD): Method of displaying a horizon- tion of video and audio recorded in a disc. The tally-long picture recorded in 16:9 aspect ratio on numbers assigned to individual tracks are referred a 4:3 TV screen by attaching bands at the top and to as the track numbers. With most of music CDs, bottom of the screen and displaying the horizon- a track is assigned to a piece of music.
In case Important of difficulty Items 65 B-picture (Bidirectionally predictire coded): Picture calculated by comparing the previous and next pictures (I-pictures or P-pictures). This picture type contains least amount of video information. P.B.C. (PlayBack Control) (VCD): VIDEO CDs carrying messages such as "Playback Control Capable" can be played interactively by selecting the desired play position or information in hierarchical structures while watching the menus displayed on the TV screen.
In case of difficulty In case of difficulty What seems to be a malfunction is not always so. Before calling for service, check the following table according to the symptom of your trouble. Operation to reset The microcomputer may fall into malfunction (impossibility to operate, erroneous display, etc.) when the power cord is unplugged while unit is ON or due to an external factor. In this case, execute the following procedure to reset the microcomputer and return it to normal condition.
In case of difficulty 67 DVD/CD player section Symptom Remedy ¶ The input selection of the TV and/or AV amplifier is incorrect or these devices are not turned on. ¶ Connection cords are connected improperly. 8 The picture is disturbed during forward search or reverse search. ¶ The picture disturbance during forward search or reverse is normal. This is not a malfunction. The picture is not neat or the video or audio quality is poor. ¶ Connection cords are connected improperly.
In case of difficulty Symptom Remedy fl The TV screen does not show any message when a button is pressed. ¶ If "On Screen Message" is set to "Off", switch it "On". The messages in the menus are not displayed in the selected language. ¶ If the played DVD does not contain the recording of the default language set by the user, the priority language specified for the disc will be selected. An inhibition icon is displayed and no operation is accepted.
In case of difficulty 69 Displayed messages and actions to be taken against them Displayed Message Meaning PGM FULL ÷ An attempt is made to select a 33rd track during programming of CD. p PGM Mode ÷ An attempt is made to start random playback in the program mode. Exit from the program mode before random playback. Q TEXT FULL ÷ An attempt is made to display the text data of a CD-TEXT disc containing more than 3 kB of text data.
Specifications (HM-DV5) In case of difficulty Main unit Speakers [Amplifier section] Enclosure ............................................ Bass-refrex type Speaker configuration Woofer ..................... 100 mm (3-15/16"), cone type Tweeter .............................. 25 mm (1"), dome type Impedance ................................................................ 6 Ω Maximum input level ............................................ 30 W Dimensions ................................
Specifications (HM-DV6) In case of difficulty 71 Main unit Speakers [Amplifier section] Enclosure ............................................ Bass-refrex type Speaker configuration Woofer ......................... 120 mm (4-3/4"), cone type Tweeter .............................. 25 mm (1"), dome type Impedance ................................................................ 6 Ω Maximum input level ............................................ 30 W Dimensions ................................
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
