Owner's Manual
Table Of Contents
- Instruction Manual
- PACKAGE CONTENTS
- INSTALLING THE HEADSET ON YOUR HELMET
- GETTING STARTED
- CAMERA OPERATION
- PAIRING THE HEADSET WITH BLUETOOTH DEVICES
- MOBILE PHONE, GPS
- STEREO MUSIC
- INTERCOM
- THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
- GROUP INTERCOM
- UNIVERSAL INTERCOM
- FM RADIO
- FUNCTION PRIORITY
- CONFIGURATION SETTING
- FIRMWARE UPGRADE
- TROUBLESHOOTING
- Appendix
- Quick Start Guide
- RIDE CONNECTED
- GETTING STARTED
- How to Use This Guide
- Buttons
- Icon Legend
- Product Details
- Installation
- Basic Operations
- Checking the Battery Level
- Bluetooth Pairing (Phone, MP3, GPS)
- Mobile Phone
- Music Controls
- Camera Controls
- Change Wireless LAN Channel
- Intercom
- Radio
- Headset Configuration Menu
- Intercom Device Manager for KENWOOD
- Intercom Utility for KENWOOD
- Intercom Camera for KENWOOD
- Troubleshooting
- Reset
- QUICK REFERENCE
- Copyrights
- Safety Precautions
10
GETTING STARTED
GETTING STARTED
Product Details
Camera Button
Antenna
Lens
Field of view: 125 degrees
Aperture: F/2.4
Jog Dial
Status LED
Phone Button
microSD Card Slot
Speaker and
Microphone Port
DC Power
Charging &
Firmware Upgrade
Port
Powering On and Off
Press the Jog Dial and the Phone Button for 1 second to power on. Tap the Jog
Dial and the Phone Button to power off.
* When the main unit is turned on, the camera turns on and video recording starts
([Auto Start Recording]).
Charging
The headset can be charged using many common methods via the supplied USB
power & data cable. The LED turns red while the headset is charging and turns
blue when it is fully charged. Depending upon the charging method, the headset
will be fully charged in about 2.5 hours. The headset is compatible with 5 V input
USB-charged devices only.
NOTE
• Using When Plugged Into a Power Source (USB-charging adapter or Powerbank)
When you want to record long videos and time lapse events, connect the KCA-HX7C to
a power source and then use it.
– If you connect the KCA-HX7C to the Powerbank while the camera is on, the KCA-
HX7C will use the electricity stored in the Powerbank but the battery will not charge.
– If you connect the KCA-HX7C to the Powerbank while the camera is off, you can use
the KCA-HX7C while it charges.