Owner's Manual
Table Of Contents
- Instruction Manual
- PACKAGE CONTENTS
- INSTALLING THE HEADSET ON YOUR HELMET
- GETTING STARTED
- CAMERA OPERATION
- PAIRING THE HEADSET WITH BLUETOOTH DEVICES
- MOBILE PHONE, GPS
- STEREO MUSIC
- INTERCOM
- THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
- GROUP INTERCOM
- UNIVERSAL INTERCOM
- FM RADIO
- FUNCTION PRIORITY
- CONFIGURATION SETTING
- FIRMWARE UPGRADE
- TROUBLESHOOTING
- Appendix
- Quick Start Guide
- RIDE CONNECTED
- GETTING STARTED
- How to Use This Guide
- Buttons
- Icon Legend
- Product Details
- Installation
- Basic Operations
- Checking the Battery Level
- Bluetooth Pairing (Phone, MP3, GPS)
- Mobile Phone
- Music Controls
- Camera Controls
- Change Wireless LAN Channel
- Intercom
- Radio
- Headset Configuration Menu
- Intercom Device Manager for KENWOOD
- Intercom Utility for KENWOOD
- Intercom Camera for KENWOOD
- Troubleshooting
- Reset
- QUICK REFERENCE
- Copyrights
- Safety Precautions
12
CAMERA OPERATION
NOTE
• When the camera is powered on, Wireless LAN is automatically powered on and set to
its default settings.
• Wireless LAN will automatically be terminated if:
– You do not use Wireless LAN on the product for 3 minutes.
– You do not use the Intercom Camera for KENWOOD for 3 minutes.
• If you want to reactivate the Wireless LAN after it is terminated, you will need to restart
the camera.
CAMERA OPERATION
Camera On or Off
When the main unit is turned on, the camera turns on and video recording starts
([Auto Start Recording]). When video is not being recorded, tap the Camera
button to activate the camera.
The camera turns off automatically after 5 minutes of inactivity. To turn off the
camera manually, tap the Camera Button and the Phone Button simultaneously.
Camera Modes
Mode Application Button
Video
Record video (normal recording, timelapse,
loop recording)
Press and hold the Camera
Button for 1 sec
Photo
Capture a single photo (Single Shot) or 8
photos (Burst Shot)
Tap the Camera Button