Owner's Manual
Table Of Contents
- Instruction Manual
- PACKAGE CONTENTS
- INSTALLING THE HEADSET ON YOUR HELMET
- GETTING STARTED
- CAMERA OPERATION
- PAIRING THE HEADSET WITH BLUETOOTH DEVICES
- MOBILE PHONE, GPS
- STEREO MUSIC
- INTERCOM
- THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
- GROUP INTERCOM
- UNIVERSAL INTERCOM
- FM RADIO
- FUNCTION PRIORITY
- CONFIGURATION SETTING
- FIRMWARE UPGRADE
- TROUBLESHOOTING
- Appendix
- Quick Start Guide
- RIDE CONNECTED
- GETTING STARTED
- How to Use This Guide
- Buttons
- Icon Legend
- Product Details
- Installation
- Basic Operations
- Checking the Battery Level
- Bluetooth Pairing (Phone, MP3, GPS)
- Mobile Phone
- Music Controls
- Camera Controls
- Change Wireless LAN Channel
- Intercom
- Radio
- Headset Configuration Menu
- Intercom Device Manager for KENWOOD
- Intercom Utility for KENWOOD
- Intercom Camera for KENWOOD
- Troubleshooting
- Reset
- QUICK REFERENCE
- Copyrights
- Safety Precautions
19
English
GPS Navigation
Ñ GPS Pairing
1
Press and hold the Jog Dial for 5 seconds until you will hear a voice
prompt saying “Intercom pairing”.
2
Within 2 seconds, double tap the Phone Button and you will hear the
voice prompt saying “GPS pairing”.
3
Search for Bluetooth devices on the GPS navigation. Select the KCA-
HX7C in the list of the devices detected on the GPS.
4
Enter 0000 for the PIN.
NOTE
• When Audio Multitasking is enabled, if you pair your GPS device via GPS Pairing, its
instructions will not interrupt your intercom conversations, but will overlay with them.
STEREO MUSIC
Bluetooth Stereo Music
1
To play or pause music, press and hold the Jog Dial for 1 second until you
hear a double beep.
2
To adjust the volume, rotate the Jog Dial.
3
To track forward or track back, rotate while pressing the Jog Dial
clockwise or counter clockwise.