Owner's Manual
Table Of Contents
- Instruction Manual
- PACKAGE CONTENTS
- INSTALLING THE HEADSET ON YOUR HELMET
- GETTING STARTED
- CAMERA OPERATION
- PAIRING THE HEADSET WITH BLUETOOTH DEVICES
- MOBILE PHONE, GPS
- STEREO MUSIC
- INTERCOM
- THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
- GROUP INTERCOM
- UNIVERSAL INTERCOM
- FM RADIO
- FUNCTION PRIORITY
- CONFIGURATION SETTING
- FIRMWARE UPGRADE
- TROUBLESHOOTING
- Appendix
- Quick Start Guide
- RIDE CONNECTED
- GETTING STARTED
- How to Use This Guide
- Buttons
- Icon Legend
- Product Details
- Installation
- Basic Operations
- Checking the Battery Level
- Bluetooth Pairing (Phone, MP3, GPS)
- Mobile Phone
- Music Controls
- Camera Controls
- Change Wireless LAN Channel
- Intercom
- Radio
- Headset Configuration Menu
- Intercom Device Manager for KENWOOD
- Intercom Utility for KENWOOD
- Intercom Camera for KENWOOD
- Troubleshooting
- Reset
- QUICK REFERENCE
- Copyrights
- Safety Precautions
23
English
GROUP INTERCOM
Group Intercom allows you to instantly create a multi-way conference intercom
with three other most recently paired headsets.
1
Go through intercom pairing with up to three headsets you want to have
Group Intercom with.
2
Press the Jog Dial for 3 seconds to begin Group Intercom. The LED will
flash green.
3
To terminate Group Intercom, press the Jog Dial for 3 seconds during
Group Intercom.
UNIVERSAL INTERCOM
Universal Intercom allows you to have intercom conversations with users of non-
KENWOOD/Sena Bluetooth headsets. Non-KENWOOD/Sena Bluetooth headsets
can be connected to the KENWOOD/Sena Bluetooth headset if they support
the Bluetooth Hands-Free Profile (HFP). You can pair the headset with only one
non-KENWOOD/Sena headset at a time. The intercom distance depends on the
performance of the Bluetooth headset to which it’s connected.
When a non-KENWOOD/Sena Bluetooth headset is paired with the headset, if
another Bluetooth device is paired via Second Mobile Phone Pairing, it will be
disconnected.
1
Press and hold the Jog Dial for 10 seconds to enter the headset
configuration menu. Rotate the Jog Dial until you hear a voice prompt,
“Universal intercom pairing”. Tap the Phone Button to enter into
Universal Intercom Pairing mode and you will hear multiple beeps.
2
Put the non-KENWOOD/Sena Bluetooth headset in Pairing Mode. The
headset will automatically pair with a non-KENWOOD/Sena Bluetooth
headset.