Owner's Manual
Table Of Contents
- Instruction Manual
- PACKAGE CONTENTS
- INSTALLING THE HEADSET ON YOUR HELMET
- GETTING STARTED
- CAMERA OPERATION
- PAIRING THE HEADSET WITH BLUETOOTH DEVICES
- MOBILE PHONE, GPS
- STEREO MUSIC
- INTERCOM
- THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
- GROUP INTERCOM
- UNIVERSAL INTERCOM
- FM RADIO
- FUNCTION PRIORITY
- CONFIGURATION SETTING
- FIRMWARE UPGRADE
- TROUBLESHOOTING
- Appendix
- Quick Start Guide
- RIDE CONNECTED
- GETTING STARTED
- How to Use This Guide
- Buttons
- Icon Legend
- Product Details
- Installation
- Basic Operations
- Checking the Battery Level
- Bluetooth Pairing (Phone, MP3, GPS)
- Mobile Phone
- Music Controls
- Camera Controls
- Change Wireless LAN Channel
- Intercom
- Radio
- Headset Configuration Menu
- Intercom Device Manager for KENWOOD
- Intercom Utility for KENWOOD
- Intercom Camera for KENWOOD
- Troubleshooting
- Reset
- QUICK REFERENCE
- Copyrights
- Safety Precautions
27
English
CONFIGURATION SETTING
Headset Configuration Setting
1
To enter into configuration menu, press and hold the Jog Dial for 10
seconds until you will hear a voice prompt, “Configuration menu”.
2
Rotate the Jog Dial clockwise or counter clockwise to navigate between
the menus. You will hear voice prompts for each menu item.
3
You can execute the command by tapping the Phone Button.
Configuration Menu Tap Phone Button
Delete All Pairings Execute
Remote Control Pairing Execute
Universal Intercom Pairing Execute
Exit Configuration Execute
Ñ Remote Control Pairing
You can remotely control the headset using Sena Remote Control devices.
1
Turn on the headset and the Remote Control device.
2
Execute Remote Control Pairing.
3
Enter pairing mode in the Remote Control device. The headset will
automatically connect with the Remote Control device in pairing mode.