Owner's Manual
Table Of Contents
- Instruction Manual
- PACKAGE CONTENTS
- INSTALLING THE HEADSET ON YOUR HELMET
- GETTING STARTED
- CAMERA OPERATION
- PAIRING THE HEADSET WITH BLUETOOTH DEVICES
- MOBILE PHONE, GPS
- STEREO MUSIC
- INTERCOM
- THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
- GROUP INTERCOM
- UNIVERSAL INTERCOM
- FM RADIO
- FUNCTION PRIORITY
- CONFIGURATION SETTING
- FIRMWARE UPGRADE
- TROUBLESHOOTING
- Appendix
- Quick Start Guide
- RIDE CONNECTED
- GETTING STARTED
- How to Use This Guide
- Buttons
- Icon Legend
- Product Details
- Installation
- Basic Operations
- Checking the Battery Level
- Bluetooth Pairing (Phone, MP3, GPS)
- Mobile Phone
- Music Controls
- Camera Controls
- Change Wireless LAN Channel
- Intercom
- Radio
- Headset Configuration Menu
- Intercom Device Manager for KENWOOD
- Intercom Utility for KENWOOD
- Intercom Camera for KENWOOD
- Troubleshooting
- Reset
- QUICK REFERENCE
- Copyrights
- Safety Precautions
33
English
FIRMWARE UPGRADE
The headset supports firmware upgrades. You can update the firmware using the
Intercom Device Manager for KENWOOD.
Please visit KENWOOD website at www.kenwood.com/cs/ce/ to check the latest
software downloads.
TROUBLESHOOTING
Fault Reset
When the headset is not working properly, you can easily reset the unit:
1
Locate the pinhole reset button at the back of the headset main unit.
2
Gently insert a paperclip into the hole and tap the Fault Reset Button
with light pressure.
3
The headset will shut down.
NOTE
• Fault Reset will not restore the headset to factory default settings.