Owner's Manual

lffl©II
KCA-HX7C
CERTIFICATION AND SAFETY APPROVALS
FCC Com_e_liance Statement
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference received,
including interference that may cause undesired
operation
This equipment has been tested and found to
comply with the limits for a Class B digital device
pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
on and off, the user is encouraged to try to correct
the interference by one or more of the following
measures:
Reorient or relocate the receiving antennae
Increase the separation between the equipment
and the receiver
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution
Any changes or modifications to the equipment
not expressly approved by the party responsible for
compliance could void user 's authority to operate the
equipment.
Industry Canada Statement
This radio transmitter (identify the device by
certification number) has been approved by Industry
Canada to operate with the antenna types listed
below with the maximum permissible gain indicated.
Antenna types not included in this list, having a gain
greater than the maximum gain indicated for that
type, are strictly prohibited for use with this device.
This device complies with Industry Canada license-
exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation
of the device.
Le present appareil est conforme aux CNR d'lndustrie
Canada applicables auxappareils radio exempts
de licence. L'exploitation est autorisee aux deux
conditions suivantes: (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil
doit accepter tout brouillage radioelectrique
subi, meme si le brouillage est susceptible d'en
compromettre lefonctionnement.
Le present appareil est conforme aux CNR d'lndustrie
Canada applicables aux appareils radio exempts de
licence. Son fonctionnement est sou mis aux deux
conditions suivantes .
(1) Cet appareil ne doit pas creer d'interferences
prejudiciables.
(2) Cet appareil doit accepter toute interference
re\ue, y compris celles causant un fonctionnement
indesirable.
FCC/IC RF Ex_e_osure Statement
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency
(RF) Exposure Guidelines and RSS-102 of the IC radio
frequency (RF) Exposure rules. This equipment should
be installed and operated keeping the radiator at least
20cm or more away from person's body.
Model: KCA- H X7C
FCC ID: S7A-SP59
IC: 8154A-SP59
Information on Disposal of Old Electrical and
Electronic Equipment and Batteries (applicable for
EU countries that have adopted separate waste
collection sy stems)
:a
-
:a
Products and batteries with the symbol
(crossed-out wheeled bin) cannot be
disposed as household waste.
Old electrical and electronic equipment
and batteries should be recycled at a facility
capable of handling these items and their
waste byproducts.
Contact your local authority for details in locating a
recycle facility nearest to you.
Proper recycling and waste disposal will help conserve
resources whilst preventing detrimental effects on our
health and the environment.
Specifications
Mo del: KCA-HX7C
RF Range for Bluetooth: 2402 to 2480 MHz
Max Output Power(E.1.R.P.) for Bluetooth: 18.08 dBm
RF Range for WiFi: 2412 to 24 72 MHz
Max Output Power(E.I.R.P.) for WiFi: 2.6 dBm
RF Range for WiFi: 5180 to 5240 MHz
Max Output Power(E.I.R.P.) for WiFi: -1.6 dBm
RF Range for WiFi: 5745 to 5825 MHz
Max Output Power(E.I.R.P.) for WiFi: -0.6 dBm
This transmitter must not be co-located or oprated in
conjunction with any other antenna or transmitter.
CD
KENWOOD
liH\fiM
KCA-HX7C
CERTIFICATION ET HOMOLOGATION DE
SECURITE
Dedaration de conformite FCC
Cet appareil est en conformite avec la partie 15 des
regles de la FCC. Son fonctionnement est sou mis aux
deux conditions suivantes:
(1) Cet appareil ne doit pas creer d'interferences
prejudiciables et
(2) Cet appareil doit accepter toutes les interferences
re\ues, y compris celles qui pourraient entraver son
bon fonctionnement.
Cet equipement a ete teste et juge conforme aux Ii mites
pour un appareil numerique de classe B, conformement
a la partie 15 des regles de la FCC. Ces limites sont
con\ues pour fournir une protection raisonnable
contre les interferences nuisibles dans une installation
residentielle. Cet equipement genere et utilise de
l'energie radio frequence et, s'il n'est pas installe et utilise
conformement aux instructions, ii peut occasionner des
interferences nuisibles au niveau des communications
radios. Cependant, ii n'existe aucune garantie que ces
interferences ne se produiront pas dans une installation
particuliere. Si cet equipement genere des interferences
nuisibles a la reception de la radio ou de la television (ce
qu'il est possible de determiner en mettant l'equipement
hors tension, puis sous tension), l'utilisateur est invite
a suivre une ou plusieurs des mesures suivantes pour
corriger le probleme des interferences en prenant l'une
des mesures suivantes:
Modifier !'emplacement ou !'orientation de
l'antenne de reception.
tloigner l'appareil du recepteur.
Brancher l'appareil sur une prise situee sur un circuit
different de celui du recepteur.
Consulter le revendeur ou un technicien
experimente pour obtenir de l'aide.
Precautions FCC
Tout changement ou modification non expressement
approuve par la partie chargee de la mise en
conformite peut annuler le droit de l'utilisateur a
utiliser l'equipement.
Dedaration de confonnite IC (lndustrie Canada)
Le present appareil est conforme aux CNR d'lndustrie
Canada applicables auxappareils radio exempts
de licence. L'exploitation est autorisee aux deux
conditions suivantes: (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil
doit accepter tout brouillage radioelectrique
subi, meme si le brouillage est susceptible d'en
compromettre lefonctionnement.
Le present appareil est conforme aux CNR d'lndustrie
Canada applicables aux appareils radio exempts de
licence. Son fonctionnement est soumis aux deux
conditions suivantes:
(1) Cet appareil ne doit pas creer d'interferences
prejudiciables.
(2) Cet appareil doit accepter toute interference
re(ue, y compris celles causant un fonctionnement
indesirable.
This radio transmitter (identify the device by certification
number) has been approved by Industry Canada to
operate with the antenna types listed below with the
maximum permissible gain indicated. Antenna types
not included in this list, having a gain greater than