Owner's Manual
Table Of Contents
- Instruction Manual
- PACKAGE CONTENTS
- INSTALLING THE HEADSET ON YOUR HELMET
- GETTING STARTED
- CAMERA OPERATION
- PAIRING THE HEADSET WITH BLUETOOTH DEVICES
- MOBILE PHONE, GPS
- STEREO MUSIC
- INTERCOM
- THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
- GROUP INTERCOM
- UNIVERSAL INTERCOM
- FM RADIO
- FUNCTION PRIORITY
- CONFIGURATION SETTING
- FIRMWARE UPGRADE
- TROUBLESHOOTING
- Appendix
- Quick Start Guide
- RIDE CONNECTED
- GETTING STARTED
- How to Use This Guide
- Buttons
- Icon Legend
- Product Details
- Installation
- Basic Operations
- Checking the Battery Level
- Bluetooth Pairing (Phone, MP3, GPS)
- Mobile Phone
- Music Controls
- Camera Controls
- Change Wireless LAN Channel
- Intercom
- Radio
- Headset Configuration Menu
- Intercom Device Manager for KENWOOD
- Intercom Utility for KENWOOD
- Intercom Camera for KENWOOD
- Troubleshooting
- Reset
- QUICK REFERENCE
- Copyrights
- Safety Precautions
6
INSTALLING THE HEADSET ON YOUR HELMET
Ñ Using the Glued Surface Mounting Plate
If you cannot install the clamp unit on the helmet, you can use the glued surface
mounting plate to attach the clamp unit to the surface of the helmet.
1
Attach adhesive tape of the glued
surface mounting plate to the
helmet.
Make sure that the glued surface
mounting plate sticks on the
helmet firmly. Maximum adhesion
occurs after 24 hours.
2
Attach the main unit to the glued
surface mounting plate until you
hear a click.
Installing the Speakers
1
Attach the hook and loop fasteners
for speakers to ear pockets inside
the helmet.
2
Attach the speakers to the hook and
loop fasteners for speakers inside
the helmet.