Owner's Manual
Table Of Contents
- Instruction Manual
- PACKAGE CONTENTS
- INSTALLING THE HEADSET ON YOUR HELMET
- GETTING STARTED
- CAMERA OPERATION
- PAIRING THE HEADSET WITH BLUETOOTH DEVICES
- MOBILE PHONE, GPS
- STEREO MUSIC
- INTERCOM
- THREE-WAY CONFERENCE PHONE CALL WITH INTERCOM PARTICIPANT
- GROUP INTERCOM
- UNIVERSAL INTERCOM
- FM RADIO
- FUNCTION PRIORITY
- CONFIGURATION SETTING
- FIRMWARE UPGRADE
- TROUBLESHOOTING
- Appendix
- Quick Start Guide
- RIDE CONNECTED
- GETTING STARTED
- How to Use This Guide
- Buttons
- Icon Legend
- Product Details
- Installation
- Basic Operations
- Checking the Battery Level
- Bluetooth Pairing (Phone, MP3, GPS)
- Mobile Phone
- Music Controls
- Camera Controls
- Change Wireless LAN Channel
- Intercom
- Radio
- Headset Configuration Menu
- Intercom Device Manager for KENWOOD
- Intercom Utility for KENWOOD
- Intercom Camera for KENWOOD
- Troubleshooting
- Reset
- QUICK REFERENCE
- Copyrights
- Safety Precautions
8
INSTALLING THE HEADSET ON YOUR HELMET
3
Tab
Adjust the head of the microphone
so that the tab is facing away from
your mouth.
4
Align the arrows on the microphone
and speaker cables and insert the
microphone cable into the speaker
cable.
5
Insert the speaker connector into
the speaker port to connect it to the
main unit.
6
Close the cover of the speaker cable
to lock the cable to the port.
NOTE
• You can use the boom microphone holder after
attaching the hook and loop fastener for boom
microphone holder on it to ensure secure installation.
Ñ Using the Wired Microphone
If you have a full face helmet, you can use the wired microphone.
1
Attach the included hook and loop
fastener for wired microphone
to the inside of the helmet’s chin
guard.
2
Attach the wired microphone to the
hook and loop fastener for wired
microphone.