User Manual
![](/manual/kenwood/kca-r71fm/user-manual-english-spanish-french/images/img-18.png)
English
— 18 —
Troubleshooting Guide
The messages shown below display your systems condition.
EJECT: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
E01
➪ Load the disc magazine properly.
NO DISC: No disc has been loaded in the disc magazine.E02
➪ Load a disc into the disc magazine.
TOC Error: No disc has been loaded in the disc magazine.E04
➪ Load a disc into the disc magazine.
The CD/MD is quite dirty. The CD is upside-down. The CD is scratched a lot.
➪ Clean the CD/MD and load it correctly.
BLANK DISC: Nothing has been recorded on the MD.E77
➪ The next MD will automatically be played.
No Track: No tracks are recorded on the MD, although it has a title.E77
➪ The next MD will automatically be played.
E-12: Now reading the data in the disc.E77
➪ Normal playback is resumed upon completing the reading of the disc data.
E-77: The unit is malfunctioning for some reason.E77
➪ Press the reset button on the display unit. If the "E-77" code does not disappear, consult your nearest service center.
Mecha Error: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.E99
➪ Check the disc magazine, and then press the reset button on the display unit. If the "Mecha Error" code does not
disappear, consult your nearest service center.
Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F),
stopping all operation.E0d
➪ Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C
(140°F), the disc will start playing again.