Operation Manual

INSTALLATION “C” BY USING HOUSING UNIT(gs.7.3a,7.3b,7.3c)

• Remove the single oven shelf, if tted, as indicated in gure 7.3a.

• Remove the upper cross member support as indicated in gure 7.3b.

• Cut the bottom of the housing as indicated in gure 7.3b.

• Screw oven base housing to adjoining cabinetry by suitable screws (not supplied) as

indicated in gure 7.3c.

• Check the position of the cabinet legs to ensure the cut-out does not interfere with the

legs support. Otherwise the cabinet may have to be removed as in “INSTALLATION

TYPE B”.

• Mount the 2 (two) metal supports “B” (supplied with the appliance in a separate kit) as

indicated in Figs. 7.3c.

• Build in the double oven making it slide on the metal supports “B”.