Operation Manual

33
A
B
C
P
D
Green
&
Yellow
(Earth)
Brown (Live)
Blue (Neutral)
ELECTRICAL FEEDER CABLE CONNECTION
WARNING: If the power supply cable is damaged, it must be replaced only by an
authorised service agent in order to avoid a hazard.
To connect the supply cable:
• Unscrew the screws “A” securing the cover plate “B” behind the oven (g. 8.1).
• Remove the cover plate “B”.
• Remove the screws “C” from the cable clamp (g. 8.2).
• Insert the mains cable (type H05RR-F or H05VV-F - 3 x 2,5 mm
2
section) into the cable
protector “P”.
• Connect the phase, neutral and earth cables to the mains terminal connection block
“D” (g. 8.2).
EARTH
N NEUTRAL
L LIVE
 Attention! Make sure the wires have been well inserted into the contacts and
have been screwed down well.
• Ret the cable clamp so that it clamps the outer sleeving of the cable, and screw the
screws “C”.
• Ret the cover plate “B” and x it with the screws “A”.
POWER SUPPLY
230 V~ 50 Hz 4080 W
FEEDER CABLE SPECIFICATIONS
Type H05RR-F or H05VV-F
3 x 2,5 mm
2
WARNING: This appliance must be earthed.
Fig. 8.2Fig. 8.1