User manual

6
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Other settings
1
Press the volume knob to enter [ FUNCTION ].
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press .
Default:
XX
TUNER SETTING
LOCAL SEEK
ON : Searches only stations with good reception. ; OFF : Cancels.
•
Settings made are applicable only to the selected source/station. Once you change
the source/station, you need to make the settings again.
AUTO
MEMORY
YES :Automatically starts memorizing 6 stations with good reception.; NO :Cancels.
•
Selectable only if [ NORMAL ] is selected for [ PRESET TYPE ]. (  5 )
MONO SET ON :Improves the FM reception, but the stereo effect may be lost.; OFF :Cancels.
NEWS SET ON : The unit will temporarily switch to News Programme if available. ; OFF : Cancels.
REGIONAL ON : Switches to another station only in the specific region using the “AF” control.;
OFF :Cancels.
AF SET ON : Automatically searches for another station broadcasting the same program
in the same Radio Data System network with better reception when the current
reception is poor.;
OFF :Cancels.
TI ON :Allows the unit to temporarily switch to Traffic Information if available (“TI”
lights up).;
OFF :Cancels.
PTY SEARCH 1 Press the volume knob to enter PTY language selection.
2 Turn the volume knob to select the PTY language ( ENGLISH / FRENCH /
GERMAN ), then press the knob.
3 Turn the volume knob to select the available Program Type (see the following).
4 Press S / T to start searching.
RADIO
Search for a station
1
Press repeatedly to select TUNER.
2 Press repeatedly (or press / on
RC-406) to select FM1/ FM2/ FM3/ MW/ LW.
3 Press S/T (or press S/ on RC-406) to search
for a station.
• To change the searching method for S/T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons
(1to6).
• To select a stored station: Press one of the number buttons
(1to6) (or press one of the number buttons (1to6) on RC-406).
Direct Access Tuning (using RC-406) (for )
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency.
3 Press to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10seconds after step
2, Direct Access
Tuning is automatically canceled.
JS_KWD_KDC_200UB_ENE2N_EN_3.indd 6JS_KWD_KDC_200UB_ENE2N_EN_3.indd 6 7/7/2015 11:22:46 AM7/7/2015 11:22:46 AM