KDC-3020R CD-RECEIVER INSTRUCTION MANUAL © B64-2117-00 (MWN/IW)
English Contents Safety precautions......................3 About RDS ..................................5 About CDs...................................5 General features .........................6 Power Selecting the Source Volume Attenuator Loudness TEL Mute System Q Audio Control Speaker Setting Switching Display Theft Deterrent Faceplate Tuner features .............................9 Tuning Station Preset Memory Auto Memory Entry Preset Tuning RDS features .............................
Safety precautions 2WARNING 2CAUTION To prevent injury or fire, take the following precautions: To prevent damage to the machine, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery, or ground wires, make sure to use automotivegrade wires or other wires with a 0.75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating.
English NOTE • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. • Press the reset button if the Disc auto changer fails to operate correctly. Normal operatin should be restored. Reset button • Characters in the LCD may become difficult to read in temperatures below 41 ˚F (5 ˚C).
About RDS About CDs RDS (Radio Data System) Handling CDs CD cleaning When listening to an RDS station, the programme service name of the station is displayed, advising you quickly which station is being received. RDS (Radio Data System) stations also transmit alternative frequency data for the same station. When you are making long trips, this function automatically switches to the particular frequency with the best reception for the particular network of stations that you want to listen to.
English General features Power Release button AM FM 4 ¢ ud Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. Selecting the Source SRC ATT/ LOUD LOUD indicator CLK Q/ AUD Press the [SRC] button. Source required Tuner CD External disc Standby (Illumination only mode) Display "TUNER" "CD" "DISC" "ALL OFF" Volume Increasing Volume Press the [u] button. Decreasing Volume Press the [d] button.
Press the [LOUD] button for at least 1 second. Each time the button is pressed for at least 1 second the Loudness turns ON or OFF. When it’s ON, "LOUD" indicator is ON. Top 40 Pops Jazz Easy Scan of Flat — Easy • Each setting value is changed with the (page 8). First, select the speaker type with the Speaker setting. • When the System Q setting is changed, the Bass, Middle, and Treble set in audio control replace the System Q values.
English General features Information Track Time Disc name* Disc title* Track title* Clock Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ALL OFF" display. 2 Enter Speaker Setting mode Press the [Q] button. 3 Select the Speaker type Press the [4] or [¢] button. Each time the button is pressed the below. Speaker type OFF For the OEM speaker For 6 & 6x9 in. speaker For 5 & 4 in.
Tuner features Tuning FM AM 4 ¢ SRC #1 - 6 MENU Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Press the [4] or [¢] button. During reception of stereo stations the "ST" indicator is ON.
English Tuner features RDS features Auto Memory Entry Putting a station with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select the Auto Memory Entry mode Press the [FM] or [AM] button. Select the "A-MEMORY" display. 4 FM/ PTY AM 4 ¢ #1 - 6 CLK TI/ VOL ADJ Open Auto Memory Entry Press the [4] or [¢] button for at least 2 seconds.
21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. PTY (Program Type) Selecting the Program Type and searching for a station. 1 Enter PTY mode Press the [PTY] button for at least 1 second. During PTY mode the "PTY" indicator is ON. This function can't be used during a traffic bulletin or AM reception. 2 Select the Program Type Press the [FM] or [AM] button. Each time the button is pressed the Program Type switches as shown below. No. Program Type Display 1. Music "MUSIC" 2. Speech "SPEECH" 3. News "NEWS" 4.
English RDS features Program Type preset Putting the Program Type in the Preset button memory and calling it up quickly. Traffic Information Switching to traffic information automatically when a traffic bulletin starts even when you aren't listening to the radio. Press the [TI] button. Each time the button is pressed the Traffic Information function turns ON or OFF. When it's ON, "TI" indicator is ON. When a traffic information station isn't being received the "TI" indicator blinks.
CD/External disc control features AM/ DISC0 FM/ DISC+ 4 ¢ Playing CD When a CD is inserted Press the [SRC] button. Select the "CD" display. When a CD is inserted, the "IN" indicator is ON. Eject the CD Press the [0] button. 3 in. (8cm) CD cannot be played. Using an adapter and inserting them into this unit can cause damage. SRC SCAN REP SCRL RDM M.RDM MENU Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button.
English CD/External disc control features Fast Forwarding and Reversing Fast Forwarding Hold down on the [¢] button. Release your finger to play the disc at that point. Reversing Hold down on the [4] button. Release your finger to play the disc at that point. Track Scan Playing the first part of each song on the disc you are listening to and searching for the song you want to listen to. 1 Start Track Scan Press the [SCAN] button. "SCAN ON"/"TSCN ON" is displayed.
Disc Naming (DNPS) (Function of disc changer) Text/Title Scroll Attaching a title to a CD. 1 Scrolling the displayed CD text or MD title. Press the [SCRL] button. Play the disc you want to attach a name to A title can't be attached to a MD. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select Name set mode Press the [FM] or [AM] button. Select the "NAME SET" display. 4 Enter Name set mode Press the [4] or [¢] button for at least 2 seconds.
English Menu system Menu System FM AM 4 ¢ Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Press the [FM] or [AM] button. Example: When you want to set the beep sound select the "BEEP" display.
"BEEP OFF" Beep canceled. removed, warning potential thieves. Display "DSI ON" "DSI OFF" Manual Clock Adjustment Setting LED flashes. LED OFF. This adjustment can be done when the (page 17) is set as OFF. 1 Selectable Illumination Select Clock Adjustment mode Press the [FM] or [AM] button. Select the "CLK ADJ" display. Selecting the button illumination color as green or red. 2 Enter Clock Adjust mode Press the [4] or [¢] button for at least 2 seconds. The clock display blinks.
News Bulletin with Timeout Setting Tuning Mode It switches automatically when a news bulletin starts even if the radio isn't being listened to. Also, the time interval when interrupt is prohibited can be set. Sets the tuning mode. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. Preset station seek "AUTO 2" Search in order of the stations in the Preset memory. Manual "MANUAL" Normal manual tuning control.
Text Scroll Restricting RDS Region (Region Restrict Function) Setting the displayed text scroll. You can choose whether or not to restrict the RDS channels, received with the AF function for a particular network, to a specific region. Display "REG ON" "REG OFF" Display "SCL MANU" "SCL AUTO" Setting The Region Restrict Function is ON. The Region Restrict Function is OFF.
English Accessories External view ......... Number of items External view ......... Number of items 1 4 .........1 .........4 2WARNING If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. 2CAUTION 2 .........2 3 5 .........4 6 .........1 .........
Connecting Wires to Terminals 10 Rear left output (White) Antenna Conversion Adaptor (ISO–JASO) (Accessory3) 2 Rear right output (Red) 4 KENWOOD disc changer input 14 REAR L To connect the Disc changer, consult your Disc changer manual.
English Connecting Wires to Terminals 2WARNING Installation ■ Installation Connecting the ISO Connector (see p.21) The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2 or 3, make the connection as illustrated.
Installation ■ Installing in Japanese-Made Cars ■ Removing the hard rubber frame 1 Refer to the section "Removing the hard rubber frame" (page 23) and then remove the hard rubber frame. 1 2 Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws. T Catch Lock N 8 mm MAX. N Engage the catch pins on the removal tool and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure.
English Installation ■ Removing the Unit 1 Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame. 2 3 Remove the screw (M4 × 8) on the back panel. Insert the two removal tools deeply into the slots on each side, as shown. Screw (M4X8) (commercially available) 4 Accessory2 Removal tool Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside. Be careful to avoid injury from the catch pins on the removal tool.
Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. ? ✔ The input/output wires or wiring harness are connected incorrectly.22 ☞ Reconnect the input/output wires or the wiring harness correctly. See the section on "Connecting Wires to Terminals". General ? The power does not turn ON.01 ✔ The fuse has blown.
English Troubleshooting Guide ? Disc source ? "AUX" is displayed without achieving External disc control mode.50 ✔ O-N switch is set to "O" side. ☞ Set the switch to "N" side. ✔ Unsupported disc changer is connected.51 ☞ Connect the supported disc changer. (page 3) ? Can’t remove disc.64 ✔ The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. ☞ The disc can only be removed within 10 minutes of the ACC switch being turned OFF.
Troubleshooting Guide The messages shown below display your systems condition. EJECT: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.E01 ➪ Load the disc magazine properly. No CD in the unit. ➪ Insert the CD. NO DISC: No disc has been loaded in the disc magazine.E02 ➪ Load a disc into the disc magazine. E-04: No disc has been loaded in the disc magazine.E04 ➪ Load a disc into the disc magazine. The CD is quite dirty. The CD is upside-down.
English Specifications Specifications subject to change without notice. FM tuner section Audio section Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) ...................8.1 dBf (0.7 µV/75 Ω) Quieting Sensitivity (S/N = 46dB) ..............15.2 dBf (1.6 µV/75 Ω) Frequency response (±3 dB) .................................30 Hz – 15 kHz Signal to Noise ratio (MONO) ..............................................65 dB Selectivity (DIN) (±400 kHz)............
