CD-RECEIVER KDC-3047 KDC-3047GY KDC-3047M KDC-3247 KDC-3347 KDC-314 INSTRUCTION MANUAL © B64-4591-00/00 (EW/E2W/E0/E20/M20/M20) B64-4591-00_00_en.indd 1 09.10.
Contents Before Use 3 Basic Operations 4 Declaration of Conformity with regard to the EMC Directive 2004/108/EC Before Using Common Operation Playing Music Listening Radio General Manufacturer: 6 8
Before Use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.
Basic Operations Release [ ] [ ] [BAND] [SRC] [DISP] Disc slot [ ] [VOL] [ ] [D] [1][2] [3][4] [5][6] Auxiliary input Before Using Common Operation Exit of the Demonstration Mode Turn off the demonstration mode when you use it for the first time after installation. Power and source select Turns the power ON by pressing the [SRC] button.
Playing Music Listening Radio Playing Disc Insert a disc into the disc slot. When inserted, the source is switched automatically and a song starts playing. Select Tuner source Pressing the [SRC] button several times switches the source to “TUNER”. Folder select Pressing the [BAND] button switches a folder. Song select Pressing the [4] or [¢] button selects a song (track or file). Fast reverses or forwards the music while pressing the [4] or [¢] button. (No sound is output while playing audio file.
General Removing the Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Detach the faceplate Press the Release button. Reattaching the Faceplate Refer to the following diagram when reattaching the faceplate. ¤ • After pressing the Release button, detach the faceplate immediately. If the faceplate is left attached, it can fall due to vibration and so on. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.
Display Indicator Text Display Selection s pt qr 1 “ST“ indicator: Lights when a stereo broadcast is received. 2 “RDS“ indicator: Lights when the RDS service is available. 3 “TI“ indicator: Lights when the Traffic Information function is on. 4 “IN“ indicator: Lights when a disc is in the unit. 5 “ “ indicator: Shows the image indicating the operating state of each source or the setting of Audio Control.
Function Setting Perform configuration for this unit. You can set up the following functions. 1 Select a source Press the [SRC] button. Items to be displayed vary depending on the selected source. Refer to the function list shown later. 2 Enter Function Setting mode Press the [VOL] knob. “FUNCTION” is displayed. 3 Select the Function item Turn the [VOL] knob to display your desired item, and then press the [VOL] knob. Repeat the above operation to select the function item to set.
same program in the same RDS network with better reception. Í RDS Regional: “RDS REG” ➤ “ON”*,”OFF” Sets whether to switch to the station only in the specific region using the “AF” control. Î Auto TP Seek: “ATP SEEK” ➤ “ON”*,”OFF” When traffic information station reception is poor, automatically searches for a station that can be received better. Ï Name Set: “AUX NAME” ➤ “AUX”*, “DVD”, “PORTABLE”, “GAME”, “VIDEO”, “TV” Sets the display when switched to AUX source.
Function Setting
Function items appearing when the CD & audio file source is selected “AUDIO CTRL” “SETTINGS” “SUB-W SET” ∂ “BASS BOOST” ƒ “SYSTEM Q” © “BASS LEVEL” ˙ “MID LEVEL” Δ “TRE LEVEL” ˚ “BALANCE” ¬ “FADER” … “SUB-W LEVEL” ' “DETAIL SET” “CLOCK” “DISPLAY” “RDS SET” “LPF SUB-W” æ “SUB-W PHASE” Z “SUPREME SET” Û “VOL OFFSET” X “CLOCK ADJ” ¥ “TIME SYNC” ø “DIMMER SET” π “TEXT SCROLL” [ “NEWS SET” « “AF SET” Å “RDS REG” Í “ATP SEEK” Î “DEMO MODE” ß Function items appearing when an AUX source is selected “AUDIO CTR
Music Disc/Audio File Operation CD source Play function Repeat play Press the [4] button. Switches between Track Repeat (“TRAC REPEAT”) and OFF (“REPEAT OFF”) when pressed while playing a CD. Switches between File Repeat (“FILE REPEAT”), Folder Repeat (“FOLD REPEAT”), and OFF (“REPEAT OFF”) when pressed while playing an audio file. Random play Press the [3] button. Randomly plays the music in the disc or folder. When Random Play is turned on, “DISC RANDOM”/ “FOLD RANDOM” is displayed.
Tuner Operation PTY (Program Type) Program Type preset Selecting the Program Type below and searching for a station; Putting the Program Type in the Preset button memory and quick recall.
Accessory of KDC-3347 Basic Operations of Remote Control In CD/Audio File Source Music select: [4]/[¢] VOL SRC Folder select: [FM+]/[AM–] ATT Pause/Play: [38] ENT Movement between folders/files: [5]/[∞] /O Return to previous folder: [ EXIT AUD AM– FM+ ] Preparing the remote control unit 0—9 DIRECT (page 12) Not used. Pull the battery sheet out from the remote control unit to the direction of the arrow.
Appendix About Audio file • Playable Audio file MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/RW/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media. • Playing order of the Audio file In the example of folder/file tree shown below, the files are played in the order from ① to ⑩.
Accessories/Installation Procedure Accessories • 1 • ..........1 • 2 • ..........2 • Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the wire on the wiring harness. 4. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5.
Connecting Wires to Terminals AUX input (Stereo) Use the mini-plug cable which is stereo type and does not have any resistance.
Connecting Wires to Terminals Connector Function Guide Pin Numbers for ISO Connectors External Power Connector A-4 A-5 A-7 A-8 Cable Colour Functions Yellow Blue/White Red Black Battery Power Control Ignition (ACC) Earth (Ground) Connection Speaker Connector B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black Rear Right (+) Rear Right (–) Front Right (+) Front Right (–) Front Left (+) Front Left (–) Rear Left (+) Rear Left (–) 2WARNING Connecting t
Installation/Removing the Unit Installation Removing the Hard Rubber Frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Lock Catch Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! ! • Cannot set up the subwoofer. • Cannot set up the low pass filter. • No output from the subwoofer. ▲ • of (page 8) is not set to On. • Preout is not set to subwoofer. ☞ “SWITCH PRE” of (page 8) Cannot set up the subwoofer Phase. ▲ Subwoofer Low Pass Filter is set to "THROUGH".
The messages shown below display your systems condition. TOC ERROR: The CD is quite dirty. The CD is upside-down. The CD is scratched a lot. ERROR 05: The disc is unreadable. ERROR 99: The unit is malfunctioning for some reason. ➪ Press the reset button on the unit. If the “ERROR 99” code does not disappear, consult your nearest service center. IN (Blink): The CD player section is not operating properly. ➪ Reinsert the CD.
Specifications FM tuner section Frequency range (50 kHz space) : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 1 μV/75 Ω Quieting Sensitivity (S/N = 46dB) : 2.5 μV/75 Ω Frequency response (±3.
B64-4591-00_00_en.indd 23 09.10.
This symbol mark indicates that Kenwood manufactured this product so as to decrease harmful influence on the environment. B64-4591-00_00_en.indd 24 09.10.