User Manual

Function of the KDC-2018/KDC-1018
Changing the Clock Display:
Press the CLK button to switch the clock display on and off.
The clock indicator lights while the clock is displayed.
NOTE
Clock display
Press either the 4 or ¢ button to select the type of
speaker. The setting switches as follows.
Off ("SP OFF/ SP-F") / For the OEM speaker ("SP OEM/ SP-O")
/ For 6/6x9 in. speaker ("SP 6/6x9/ SP-6") / For 5/4 in. speaker
("SP 5/4/ SP-5")
Press the Q button to end the mobile preset plan mode.
When you change the setting of type of speaker, the bass,
middle, and treble tone settings are returned to original levels.
NOTE
4
3
This function allows you to adjust the setting that is recalled
with the System Q, according to types of speakers.
Press the SRC button repeatedly to select the standby mode.
"ALL OFF/OFF" is displayed when the standby mode is
selected.
Press the Q button to enter the mobile preset plan mode.2
1
Mobile Preset
You can recall the best audio setting preset for different types
of the music.
Switching the Preset Sound Setting:
Each time you press the Q button, the preset sound setting
switches as follows:
As you proceed, each indicator would go on.
The System Q function changes the values of the following
sound quality parameters:
Bass center frequency, bass level, bass quality factor, bass
extend, middle center frequency, middle level, middle quality
factor, treble center frequency, and treble level.
Note that some of these parameters cannot be controlled by the
audio control setting feature.
Their setting values are different depending on the setting of the
mobile preset plan mode.
NOTE
Flat ("FLAT/SQ-1")
Easy ("EASY/SQ-6")
Rock ("ROCK/SQ-2")
Jazz ("JAZZ/SQ-5")
Pops ("POPS/SQ-4")
Top 40 ("TOP 40/SQ-3")
Scan of Flat – Easy ("SCAN/SCAn")
(Default setting)


System Q
— 9 —