KDC-4070RA KDC-4070RG KDC-4070RV CD-RECEIVER INSTRUCTION MANUAL COMPACT DIGITAL AUDIO © B64-1271-00 (EF)
English Contents Before use Other features Safety precautions ........................................................................3 Handling Compact discs................................................................5 Audio Control Setting ..................................................................20 Clock display ...............................................................................20 TEL Mute ....................................................................................
Safety precautions 2WARNING 2CAUTION 2CAUTION To prevent injury and/or fire, take the following precautions: To prevent damage to the machine, take the following precautions: Do Not Load 8-cm (3-in.) CDs in the CD slot • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery or ground cables, make sure to use automotivegrade cables or other cables with an area of 0.
English Safety precautions Cleaning the Unit NOTE • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. PWR OFF SRC 40W X 4 KDC-4070R PTY MENU LOUD SCAN RDM If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon cloth or soft cloth.
Handling Compact discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged. Cleaning CDs Do Not Load CD Accessories in Slot If a CD has become dirty, wipe it off gently using a commercially available cleaning cloth or a soft cotton cloth, starting from the centre of the disc and moving outward.
English Basic operations Power SRC/ PWR OFF d u FM ¢ Turning on the power: Press the SRC button. NOTE PWR OFF Turn the power on before carrying out the following procedures. Turning off the power: Hold down the PWR OFF button for one second or more.
MANUAL) ➞ Auto Memory Entry*3 (A-MEMORY (start)) ➞ AF Function*4 (AF ON / OFF) ➞ Region Restrict Function*4 (REG ON / OFF) ➞ Auto TP Seek*4 (ATPS ON / OFF) ➞ Monaural Reception*5 (MONO OFF / ON) ➞ Touch Sensor Tone Menu System To accommodate a greater number of functions, a menu system has been employed for making settings. Press the MENU button to enter the menu mode and then display the function to make the setting. Details on each setting are explained separately in the corresponding function page.
English Basic operations Tuner features Loudness This function amplifies low and high tones when the volume is turned down. The LOUD indicator lights up, when the loudness function is on. FM SRC MENU PWR OFF Turning Loudness On/Off: Hold down the LOUD button for one second or more to switch the loudness on and off.
Selecting Tuning Mode Select which tuning mode — auto seek or manual — to use as the default. When the AUTO indicator is on, auto seek tuning is selected. When the indicator is off, manual tuning is selected. 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. 2 Press the ¢ button repeatedly until the tuning function Local Seek Function With the local seek function turned on, auto seek tuning skips stations with relatively poor reception.
English Tuner features Monaural Reception When poor stereo reception is experienced, this function will reduce noise and improve listening conditions. 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. 2 Press the ¢ button repeatedly until the monaural reception function appears in the display. Press the 4 button to search in the other direction.
RDS features Switching Display for Tuner Switching the Display: Each time you press the CLK button, the display switches between the Programme service name (during RDS station reception)/frequency and clock.
English RDS features RDS (Radio Data System) AF (Alternative Frequency) Function RDS is a digital information system that lets you receive signals besides those of regular radio programmes, such as network information being transmitted from radio stations. When listening to an RDS station (ie, a station with RDS capability), the programme service name of the station is displayed along with the frequency, advising you quickly which station is being received.
Turning Region Restrict Function On/Off: 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. The display and setting will change. If the traffic information station you are tuned to experiences poor reception, this function automatically seeks another TP station. 2 Press the ¢ button repeatedly until the Region restrict 4 Press the MENU button to end the menu mode. function appears in the display. Press the 4 button to search in the other direction.
English RDS features • You can select the type of programme directly by pressing a preset button. The buttons are factory-set to the following type of programmes: 1. Music 2. Speech 3. News 4. Other Music 5. Serious Classical 6. Varied Programme Type (PTY) Function Conduct auto seek tuning only on those stations with selected kinds of programmes. 1 Hold down the PTY button for one second or more.
Traffic Information Function Presetting Volume for Traffic Information/News You can listen to traffic information. If you are listening to tapes or discs, they will continue playing until a traffic bulletin is broadcast. Preset the volume level to be used for traffic information and news broadcasts. Turning TI function On/Off: Press the TI button to turn the function on and off. When the function is on, the TI indicator is turned on. When none is being received, the TI indicator will blink on and off.
English RDS features NOTE News Bulletin Function with PTY News Timeout Setting You can arrange to have news bulletins interrupt your current listening source, including other radio stations. When the News Bulletin function is on, the PTY News Timeout setting allows you to set the interval during which further news interruption cannot take place. You can adjust the PTY news interruption period from 10 to 90 minutes for each journey.
CD player features Playing CDs 0 MENU FM SRC PWR OFF ¢ SRC 40W X 4 KDC-4070R PTY MENU LOUD SCAN RDM REP TI VOL ADJ SCAN RDM REP CLK CLK 4 AM Playing CDs: If no CDs are inserted, insert one in the slot with the label facing up. If a CD is already inserted, press the SRC button repeatedly until the CD mode. "CD" is displayed when the CD mode has been selected. The CD will start playing. The CD-IN indicator lights up when a CD has been inserted.
English CD player features Fast Forwarding and Reversing Disc Play Track Repeat Repeat playing the current track. Fast Forwarding Disc Play: Hold down on the ¢ button. Release your finger to play the disc at that point. Reversing Disc Play: Hold down on the 4 button. Release your finger to play the disc at the point. Turning Repeat Play Function On/Off: Press the REP button to switch the repeat play function on and off. "REP ON" is displayed when repeat play is turned on.
Other features Random Play Play all the tracks on the current disc in random order. Release button AUD/ MENU 1 Press the RDM button to switch the random play function on and off. "RDM ON" is displayed when random play is turned on. The display of the track number changes continuously as the next track is being selected. When the track has been selected, play starts. The selected track number blinks in the display as it is being played.
English Other features Audio Control Setting Clock display Adjust various parameters of sound quality. Turning clock display On/Off: Each time you press the CLK button, the display switches between the clock and each mode display. 1 Press the AUD button to enter the control mode. 2 Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change as follows: Pressing the FM button advances the display, and pressing the AM button reverses it.
on or off, respectively. "SYNC ON" (Automatic time adjustment) "SYNC OFF" (Manual time adjustment) 2 Press the ¢ button repeatedly until the Touch Sensor Tone function appears in the display. Press the 4 button to search in the other direction. The function setting is indicated by "BEEP ON" or "BEEP OFF" in the display, indicating that the current beep setting is on or off, respectively. 3 Switching settings Press either the AM button or FM button. The display and setting will change.
English Other features Disabled System Indicator (DSI) Projections A red indicator blinks on the unit after the faceplate is removed, warning potential thieves. The factory default for this function is "ON". Turning Disabled System Indicator On/Off: 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. 2 Press the ¢ button repeatedly until the Disabled System Indicator function appears in the display. Press the 4 button to search in the other direction.
Accessories External view Number of items 1 ..........................................1 2 ..........................................2 3 ..........................................1 2CAUTION The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the -terminal of the battery. 2.
English Connecting Cables to Terminals FM/AM antenna input Antenna Conversion Adaptor (ISO–JASO) (Accessory3) Antenna Cord (ISO) Connector Function Guide Pin Numbers for ISO Connectors External Power Connector A–4*1 A–4*2 A–5*1 A–7*1 A–7*2 A–8 Cable Colour Battery Ignition (ACC) Power Control Ignition (ACC) Battery Earth (Ground) Connection 1 * : KDC-4070RG/4070RA only 2 * : KDC-4070RV only Speaker Connector B–1 B–2 B–3 B–4 B–5 B–6 B–7 B–8 Yellow Red/Black Blue/White Red Yellow/Black Black Rear lef
Installation ■ Installation 2WARNING Connecting the ISO Connector (see p.24) (KDC-4070RG/4070RA only) The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2 or 3, make the connection as illustrated.
English Installation ■ Removing the hard rubber frame ■ Removing the Unit 1 Engage the catch pins on the removal tool and remove the two 1 Refer to the section “Removing the hard rubber frame” and locks on the lower level. Lower the frame and pull it forward as shown in the figure. Lock then remove the hard rubber frame. 2 Remove the screw (M4×8) on the back panel. 3 Insert the two removal tools deeply into the slots on each side, as shown.
Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM The power does not turn on. POSSIBLE CAUSE SOLUTION The fuse has blown. After checking for short circuits in the cables, replace the fuse with one having the same rating. No ACC position on vehicle ignition. Connect the same cable to the ignition as the battery cable.
Specifications Specifications subject to change without notice. FM tuner section Audio section Maximum output power .................................................40 W × 4 Output power (DIN 45324, +B=14.4 V) ..........................26 W × 4 Tone action Bass: ...........................................................100 Hz ±10 dB Treble: .........................................................10 kHz ±10 dB Preout level / load ....................1800 mV / 10 kΩ (During CD play) Preout Impedance ....
