m .u a co 0. 13 “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
Safety Safety Preparation 2 4 How to attach/detach the faceplate How to reset your unit Initial settings before operations Basic operations Getting started 5 7 Canceling the display demonstration Setting the demonstration mode Adjusting the clock Listening to the radio 8 Adjust [SETTINGS] mode settings Listening to the other external components 9 Listening to a disc/ USB device/ iPod 10 Important to know...
ENGLISH The marking of products using lasers Declaration of Conformity with regard to the EMC Directive 2004/108/EC EU Representative’s: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.
Preparation How to attach/detach the faceplate If this unit fails to operate properly, press the reset button. 1 2 How to reset your unit 1 The unit returns to factory settings when the reset button is pressed. 2 Reset button Initial settings before operations .u a 1 Press SRC to enter [STANDBY] mode. 2 Press the volume knob to enter [FUNCTION] mode. 3 Turn the volume knob to select [INITIAL SET], then press to enter. 4 Turn the volume knob to make a selection, then press to confirm.
ENGLISH Basic operations Display window KDC-4051UG/ KDC-4051UR/ KDC-4051URY/ KDC-415UA/ KDC-415UR/ KDC-4251URY/ KDC-4451UQ: KDC-4551UB/ KDC-455UW/ KDC-4651URY: Volume knob Loading slot 13 0. co m Detaches the faceplate .u a Ejects the disc The illustration and button names used for explanation in this manual are of KDC-4551UB/ KDC-455UW/ KDC-4651URY (unless mentioned otherwise).
When you press or hold the following button(s)... Button General operation Turns on. Turns off if pressed and held. Selects the available sources (TUNER, USB or iPod, CD, AUX, STANDBY), if the power is turned on. • If the source is ready, playback also starts. “iPod” and “CD” are selectable only when an iPod is connected or a disc is loaded. SRC Volume knob (turn) Adjusts the volume level. Selects items. Volume knob (press) Confirms selection. Enters [FUNCTION] settings.
The display demonstration is always turned on unless you cancel it. When you turn on the power (or after you reset the unit), the display shows: [CANCEL DEMO] \ [PRESS] \ [VOLUME KNOB] Maintenance Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit. Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a cotton swab or cloth. m 1 Press the volume knob.
Listening to the radio Hold to turn on or off the Traffic Information function (not applicable if “MW/ LW” is selected). .u a Hold for about 2 seconds to memorize the current station or the selected Program Type. (Refer to [PTY SEARCH] on the table below to select the Program Type.) Press briefly to recall memorized station (or Program Type after entering the PTY search mode). m 1 Press SRC to select “TUNER.” 2 Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ MW/ LW).
ENGLISH Item Selectable setting (Preset: *) RDS REGIONAL/ ON *: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels. RDS REG AUTO TP SEEK/ ON *: Automatically searches for a station with better reception when the traffic information‘s reception is ATP SEEK poor. ; OFF: Cancels. [PTY SEARCH] is selectable only when the source is “FM.” [NEWS SET/ AF SET/ RDS REGIONAL/ RDS REG/ AUTO TP SEEK/ ATP SEEK] is selectable only when the source is “FM.
Listening to a disc/ USB device/ iPod Ejects the disc. (“NO DISC” appears and “IN” indicator goes off.) Press to select track/file. Hold to fast-forwards/reverses. USB terminal Press to select next folder. Start playing a disc Connecting a USB device 13 0. co m 1 Press SRC to turn on the power. 2 Insert a disc into the loading slot. Playback starts automatically. 3 Press number button 6 ( ) to resume/pause playback (if necessary). .u a Slide open the cover.
Audio CD : TRACK/ TRAC (track) REPEAT, REPEAT OFF AAC/MP3/WMA : FILE REPEAT, FOLD (folder) REPEAT, REPEAT OFF iPod : FILE REPEAT, REPEAT OFF Selecting Random Play Press number button 3 (ALL RDM) or repeatedly to make a selection. Discs that cannot be used Discs that are not round. Discs with coloring on the recording surface or discs that are dirty. You cannot play a Recordable/ReWritable disc that has not been finalized.
Functions of KDC-4551UB/ KDC-455UW/ KDC-4651URY with iPod 1 Press number button 5 (MEMO MY LIST) to display the playlist. “MY PLAYLIST” appears. 2 Turn the volume knob to select the song you want, then press to confirm. Random play cannot be performed during playback of a song in the playlist. Deleting a song on the playlist 1 Press number button 5 (MEMO MY LIST) to display the playlist. “MY PLAYLIST” appears.
ENGLISH Functions of KDC-4551UB/ KDC-455UW/ KDC-4651URY with iPod Item SKIP SEARCH Selectable setting (Preset: *) 0.5% */ 1%/ 5%/ 10%: Sets the ratio of skip when searching for a song in Music Search mode. (Holding 4 / ¢ skips songs at 10% regardless of the setting made.) MPLIST DELETE YES: Deletes the saved My Playlist. ; NO *: Cancels. .u a For the latest compatible list and software version of iPod/iPhone, see: www.kenwood.
Selectable setting (Preset: *) MIC CTR FRQ/ MID C FRQ: 0.5K/ 1.0K */ 1.5K/ 2.5K: Selects the center frequency. MID LEVEL: –8 — +8 (Preset: 0): Adjusts the level. MID Q FACTOR/ MID Q FCTR: 0.75/ 1.00 */ 1.25: Adjusts the Q factor. TRE ADJUST TRE CTR FRQ/ TRE C FRQ: 10.0K/ 12.5K */ 15.0K/ 17.5K: Selects the center frequency. TRE LEVEL: –8 — +8 (Preset: 0): Adjusts the level. BALANCE L15 — R15 (Preset: 0): Adjusts the left and right speaker output balance.
Equipped for KDC-4651URY ENGLISH Using the remote controller (RC-405) Preparation: When you use the remote controller for the first time, pull out the insulation sheet. m Insulation sheet .u a Remote sensor Do not expose to bright sunlight. Basic operations: SRC : Selects the available sources. VOL : Adjusts the volume level. 5 / ∞ : Selects folders/files (in Music Search mode). : Pauses/resumes playback. ENT Confirms selection (in Music Search mode). *AM– / #FM+ : Selects bands. Selects folders.
Troubleshooting Remedy/Cause Adjust the volume to the optimum level. / Check the cords and connections. Check to be sure the terminals of the speaker leads are covered with insulating tape properly, then reset the unit. If “PROTECT” does not disappear, consult your nearest service center. The unit does not work at all. Reset the unit. [P-OFF WAIT] does not work. Turn off the demonstration mode. (page 7) Radio reception is poor. / Static noise while Connect the antenna firmly.
(×1) (×1) (×1) (×1) (×1) (×2) Basic procedure If your car's ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, as with battery wires, the battery may die. Do not use your own screws. Use only the screws provided. Install this unit in the console of your vehicle.
Wiring connection For KDC-4051UG/ KDC-4051UR/ KDC-415UA/ KDC-415UR/ KDC-4251URY/ KDC-4551UB/ KDC-455UW/ KDC-4651URY KDC-4051UG/ KDC-4051UR/ KDC-415UA/ KDC-4251URY/ KDC-4651URY KDC-415UR/ KDC-4551UB/ KDC-455UW Front output terminals Rear/subwoofer output terminals Rear/subwoofer output terminals Fuse (10 A) Antenna terminal (JASO) KDC-4051UG/ KDC-4051UR/ KDC-415UA/ KDC-415UR/ KDC-4551UB/ KDC-455UW/ KDC-4651URY: To the steering wheel remote control adapter (optional accessory) Blue/White (Power control/m
ENGLISH For KDC-4051URY/ KDC-4451UQ Fuse (10 A) Antenna terminal (JASO) White (+) / White/black (–) : To front speaker (left) Gray (+) / Gray/black (–) : To front speaker (right) Green (+) / Green/black (–) : To rear speaker (left) .u a Purple (+) / Purple/black (–) : To rear speaker (right) To the antenna control terminal in the vehicle. Blue/White (Power control wire) To the power control terminal when using the optional power amplifier.
Installing the unit 1 Connect the wiring harness to the unit. Other wiring connection has been completed earlier. (page 18, 19) 2 Before attaching, make sure the direction of the escutcheon is correct. (Wider hooks on the top side.) Dashboard of your car Removing the unit m .u a Bend the appropriate tabs to hold the mounting sleeve firmly in place. 13 0. co 1 Detach the faceplate. 2 Engage the catch pin on the removal tools into the holes on both sides of the escutcheon, then pull it out.
FM tuner section USB interface Maximum output power: 50 W × 4 Output power (DIN 45324, +B = 14.