CD-RECEIVER KDC-4547U KDC-4047U KDC-4047UGY KDC-4047UM KDC-414U KDC-414UM INSTRUCTION MANUAL © B64-4581-00/00 (E0/E20/M20) B64-4581-00_00_en.indd 1 09.10.
Contents Before Use 3 Basic Operations 4 Declaration of Conformity with regard to the EMC Directive 2004/108/EC Before Using Common Operation Playing Music (CD/USB/iPod) Listening Radio General Manufacturer: 6 8
Before Use 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.
Basic Operations Release [ ] [ ] [BAND] [SRC] Disc slot [DISP] [VOL] [ ] [D] [1][2] [3][4] [5][6] [ ] USB Terminal Auxiliary input Before Using Common Operation Exit of the Demonstration Mode Turn off the demonstration mode when you use it for the first time after installation. Power and source select Turns the power ON by pressing the [SRC] button.
Playing Music (CD/USB/iPod) Listening Radio Playing Disc Insert a disc into the disc slot. When inserted, the source is switched automatically and a song starts playing. Select Tuner source Pressing the [SRC] button several times switches the source to “TUNER”. Playing USB device Connect a USB device or iPod to the USB terminal. When connected, the source is switched automatically and a song is starts playing. Folder select Pressing the [BAND] button switches a folder.
General Removing the Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Detach the faceplate Press the Release button. Reattaching the Faceplate Refer to the following diagram when reattaching the faceplate. ¤ • After pressing the Release button, detach the faceplate immediately. If the faceplate is left attached, it can fall due to vibration and so on. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.
Display Indicator Text Display Selection KDC-4047U/ KDC-4047UGY/ KDC-4047UM/ KDC-414U/ KDC-414UM Changing displayed information on each source following; w qx rs KDC-4547U p q r s t u vw 1 “ATT“ indicator: Blinks when the attenuator function is on. Use the remote control (optional accessory) to turn on/off the attenuator function. 2 “ST“ indicator: Lights when a stereo broadcast is received. 3 “RDS“ indicator: Lights when the RDS service is available.
Function Setting Perform configuration for this unit. You can set up the following functions. 1 Select a source Press the [SRC] button. Items to be displayed vary depending on the selected source. Refer to the function list shown later. 2 Enter Function Setting mode Press the [VOL] button. “FUNCTION” is displayed. 3 Select the Function item Turn the [VOL] knob to display your desired item, and then press the [VOL] knob. Repeat the above operation to select the function item to set.
Å Alternative Frequency: “AF SET” ➤ “ON”*,”OFF” When the reception is poor, automatically alternate to another frequency broadcasting the same program in the same RDS network with better reception. Í RDS Regional: “RDS REG”/“RDS REGIONAL” ➤ “ON”*,”OFF” Sets whether to switch to the station only in the specific region using the “AF” control.
Function Setting Upgrades the firmware. Selecting "YES" and then pressing [VOL] knob starts upgrading the firmware. ⁄ • For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/ ƒ Demo Mode: “DEMO MODE” ➤ “ON”*, ”OFF” Specifies whether to enable demonstration.
“MID LEVEL” ¬ “TRE LEVEL” … “BALANCE” ' “FADER” æ “SUB-W LEVEL” Z “DETAIL SET”/ “DETAILED SET” “VOL OFFSET”/ “VOLUME OFFSET” C “LOCAL SEEK” “ “SEEK MODE” ] “AUTO MEMORY” ‘ “MONO SET” \ “NEWS SET” « “AF SET” Å “RDS REG”/“RDS REGIONAL” Í “ATP SEEK”/“AUTO TP SEEK” Î “CLOCK” “CLOCK ADJ”/ “CLOCK ADJUST” ¥ “TIME SYNC” ø “DISPLAY” “DIMMER SET” π “TEXT SCROLL” [ “DEMO MODE” ƒ “SETTINGS” Function items appearing when the CD & audio file source is selected “SUB-W SET”/“SUBWOOFER SET” © “BASS BOOST” ˙ “SYSTEM Q” Δ “
Music Disc/Audio File Operation Play function Function of Audio file/ CD source Music Search Repeat play Press the [4] button. Switches between Track Repeat (“TRAC REPEAT”/ “TRACK REPEAT”) and OFF (“REPEAT OFF”) when pressed while playing a CD. Switches between File Repeat (“FILE REPEAT”), Folder Repeat (“FOLD REPEAT”/ “FOLDER REPEAT”), and OFF (“REPEAT OFF”) when pressed while playing an audio file. Random play Press the [3] button. Randomly plays the music in the disc or folder.
Function of KDC-4547U with iPod Function of KDC-4547U with iPod Music Search for iPod Alphabet Search Searches for the song (in iPod) you want to play. You can select a song by alphabet. This function searches songs whose name contain the specified character(s) in the list of the selected browse item (artist, album, etc). 1 Enter Music Search mode Press the [ ] button. “SEARCH” is displayed.
Music Disc/Audio File Operation Function of KDC-4547U with iPod My Playlist for iPod Allows you to register your favorite songs in the Playlist of this unit. You can register up to 10 songs in the Playlist. 2 Turn the [VOL] knob to select ”ONE” or “ALL”, and then press the [VOL] knob. Selecting “DELETE ALL” allows you to delete all songs. 3 Turn the [VOL] knob to select ”YES”, and then Registering Songs in the Playlist press the [VOL] knob. “COMPLETED” is displayed.
Tuner Operation PTY (Program Type) Program Type Preset Selecting the Program Type below and searching for a station; Putting the Program Type in the Preset button memory and quick recall.
Appendix About Audio file • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) • Playable disc media CD-R/RW/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • Playable USB device USB mass storage class • Playable USB device file system FAT16, FAT32 • iPod Playable Model KDC-4547U Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device.
About USB device • In this manual, the word “USB device” is used for flash memories and digital audio players which have USB terminals. • When the USB device is connected to this unit, it can be charged up provided that this unit is powered. • Install the USB device in the place where it will not prevent you from driving your vehicle properly. • You cannot connect a USB device via a USB hub and Multi Card Reader. • Take backups of the audio files used with this unit.
Accessories/Installation Procedure Accessories • 1 • ..........1 • 2 • ..........2 • Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the wire on the wiring harness. 4. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5.
Connecting Wires to Terminals CA-U1EX (Optional accessory) USB connector AUX input (Stereo) Use the mini-plug cable which is stereo type and does not have any resistance.
Connecting Wires to Terminals Connector Function Guide Pin Numbers for ISO Connectors External Power Connector A-4 A-5 A-7 A-8 Cable Colour Functions Yellow Blue/White Red Black Battery Power Control Ignition (ACC) Earth (Ground) Connection Speaker Connector B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black Rear Right (+) Rear Right (–) Front Right (+) Front Right (–) Front Left (+) Front Left (–) Rear Left (+) Rear Left (–) 2WARNING Connecting t
Installation/Removing the Unit Installation Removing the Hard Rubber Frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Lock Catch Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! ! ! • Cannot set up the subwoofer. • Cannot set up the low pass filter. • No output from the subwoofer. ▲ • of (page 8) is not set to On. • Preout is not set to subwoofer. ☞ “SWITCH PRE”/ “SWITCH PREOUT” of (page 8) Cannot set up the subwoofer Phase. ▲ Subwoofer Low Pass Filter is set to “THROUGH”.
The messages shown below display your systems condition. TOC ERROR: The CD is quite dirty. The CD is upside-down. The CD is scratched a lot. ERROR 05: The disc is unreadable. ERROR 99: The unit is malfunctioning for some reason. ➪ Press the reset button on the unit. If the “ERROR 99” code does not disappear, consult your nearest service center. IN (Blink): The CD player section is not operating properly. ➪ Reinsert the CD.
Specifications FM tuner section Frequency range (50 kHz space) : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 1 μV/75 Ω Quieting Sensitivity (DIN S/N = 46dB) : 2.5 μV/75 Ω Frequency response (±3.
