KDC-PS9070R KDC-8070R KDC-8070W KDC-7070R CD-RECEIVER INSTRUCTION MANUAL COMPACT DIGITAL AUDIO © B64-1396-00 (EY)
English Contents Before use Other features Safety precautions ................................................................................................3 Handling Compact discs........................................................................................5 Switching Spectrum Analyzer Display.................................................................27 Audio Control Setting ..........................................................................................
Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION To prevent injury and/or fire, take the following precautions: To prevent damage to the machine, take the following precautions: • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery or ground cables, make sure to use automotivegrade cables or other cables with an area of 0.
English Safety precautions Mask key NOTE • If you experience problems during installation, consult your Kenwood dealer. • If the unit fails to operate properly, press the RESET button. When the faceplate is not visible, slide the manual open switch (as illustrated on p.7) for as many times as you have preset to make the faceplate control appear. The unit returns to factory settings when the RESET button is pressed.
Handling Compact discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged. Cleaning CDs Do Not Load CD Accessories in Slot If a CD has become dirty, wipe it off gently using a commercially available cleaning cloth or a soft cotton cloth, starting from the centre of the disc and moving outward.
English Basic operations d u Power SRC/ POWER OFF 4 FM ¢ 44W 4 LOUD SCAN RDM REP D.SCAN M.RDM OFF DAB TI VOL ADJ PTY ATT/LOUD MENU DISC MENU KDC-PS9070R LOUD indicator KDC-8070R/8070W/7070R Power ON/OFF: When you turn your vehicle’s ignition on, the unit’s power will also turn on, with the faceplate reversing to show the control panel. When you turn your vehicle’s ignition off, the faceplate will reverse to hide the control panel, and the unit’s power will turn off.
• Whilst the control panel is moving, pressing the buttons will not have any effect. Do not try to press the buttons on the control panel as the faceplate is moving, as excessive force may damage the unit. • During the forced closing of the unit (i.e., having the unit left closed whilst ignition is turned on), the faceplate will not open no matter how often the ignition is turned on or off, unless “Manual Open Switch” at the rear of the faceplate is pressed in order to open it.
English Basic operations level adjustment*7 (Bright ##) ↔ Contrast Adjustment*8 (Contrast ##) ↔ Dimmer (Dimmer ON / OFF) ↔ Switching Graphic Display*7 (Graphic ON / OFF) ↔ Black Mask (BLK MASK OFF / ON) ↔ Switching Preout *10 (SWPRE Rear / N-Fad) ↔ Dual zone system*3 / 7 (Zone 2 OFF/ON) ↔ External AMP Control (AMP BASS Flat, FLT /+6/+12) ↔ Manual Open Switch Setting (Open SW# / OPEN SW#) ↔ News Bulletin Function (NEWS OFF/##MIN) ↔ Local Seek*9 (Local.
▼ Tuner mode ▼ CD mode ▼ External disc control mode ▼ AUX mode Loudness This function amplifies low and high tones when the volume is turned down. The LOUD indicator lights up, when the loudness function is on. Turning Loudness On/Off: Hold down the LOUD button for one second or more to switch the loudness on and off. NOTE • The mode switches to the next mode from any mode which cannot be used. • The external disc control mode will differ depending on the unit that is connected.
English Tuner features 4 FM ¢ SRC 44W 4 DISC EJECT DISP NAME.S OFF DAB Selecting Tuning Mode You can choose from three tuning modes: auto seek, preset station seek, and manual. The “AUTO 1” indicator lights up when auto seek tuning is selected, and the “AUTO 2” indicator lights when preset station seek tuning is selected. 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. LOUD SCAN RDM REP D.SCN M.
lowest number). Monaural Reception NOTE If the frequencies stored at the preset numbers receive stations which were not originally memorized when traveling long distances, the preset number is not displayed. In such cases, pressing the 4/¢ button to use preset station seek will receive channel 1. • Manual Tuning Press the ¢ button to increase the frequency by one step. Press the 4 button to decrease the frequency by one step.
English Tuner features Auto Memory Entry Station Preset Memory You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to 6 frequencies can be stored this way. Store the frequency of the station currently being listened to. You can then recall that station with a single touch of a button.
RDS features Pressing the AM button switches between the displays in the reverse direction. 4 FM ¢ DISP 2 Once the name is displayed for the station you want to listen to Press the OK button. Reception starts of the displayed station, and the seek mode ends. Cancelling mode during input: Press the DNPP button. The seek mode is cancelled. 44W 4 LOUD SCAN RDM REP Kenwood intelligent Twin IF (K2I) D.SCN M.
English RDS features RDS (Radio Data System) AF (Alternative Frequency) Function RDS is a digital information system that lets you receive signals besides those of regular radio programmes, such as network information being transmitted from radio stations. When listening to an RDS station (ie, a station with RDS capability), the programme service name of the station is displayed along with the frequency, advising you quickly which station is being received.
Turning Region Restrict Function On/Off: 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. Pressing the TI button whilst in the MW/LW band automatically switches reception to the FM band. However, the MW/LW band is not returned to when the TI button is pressed again. Switching to a Different Traffic Information Station: Use the 4 / ¢ buttons to make an auto seek of the TI stations in a certain band.
English RDS features Auto TP Seek Function NOTE • The volume cannot be lowered by this function during tuner reception. The volume is only set when it is louder than the listening volume of the tuner. • You can arrange only to listen to traffic information or news bulletins with at preset volume with the volume set at minimum.
↔ 60MIN ↔ 70MIN ↔ 80MIN ↔ 90MIN (MIN= minutes) When you select the news interruption timeout interval, the News function turns on and the NEWS indicator lights up. When a news bulletin is received, "NEWS" will be displayed and reception will begin at the preset volume. in the reverse order. The text scroll function is displayed with "Scroll Auto" or "Scroll Manu". "Scroll Manu" (Manual scrolling) "Scroll Auto" (Automatic scrolling) 3 Switching settings NOTE Press either the AM or FM button.
English RDS features or more to display the name of the language currently used. If you want to change the language, press the preset button for the desired language and then the 38(PTY) button. English is #1, French is #2, German is #3, and Swedish is #4. Radio Text You can display textual information being transmitted by RDS stations. 2 Select the type of programme to be received Turning on Radio Text Display Mode: Pressing the DISP button switches the display as follows.
CD/External disc control features “PTY” blinks in the display for about 30 seconds. If you make no key input in 30 seconds, the PTY selection mode will turn off automatically. 4 DISP/NAME.S 44W 4 NOTE If no programme can be found, "NO PTY" is displayed. If you want to select another type of programme, repeat steps 2 and 3 above. Switching to Other Stations with the Same Type of Programme: When “PTY” is blinking in the display, perform auto seek tuning.
English CD/External disc control features ■ When a unit equipped with an O-N switch is to be connected, please also see the instruction manual of this unit. Set the O-N switch to "N". "N"-operation will be set. ■ When a unit that is not equipped with an O-N switch, or the changer switching unit "KCA-S200" is connected, "O"operation will be set. "N"-operation: • The disc title and track title of the CD text can be displayed.
• "CD2"...when a CD player is connected • "DISC"...when a disc changer is connected • "DISC-1", "DISC-2"...when two disc changers are connected Pausing and Restarting Disc Play: Press the 38 button to make the disc pause. Press the same button again to start play again. Press either the AM or FM button. The display and setting will change. 4 Press the MENU button to end the menu mode. To scroll automatically: 1 Press the DISP button to display the disc title or the track title.
English CD/External disc control features Play starts at the beginning of the displayed disc. Track Search NOTE Search forwards or backwards through the tracks on the disc until you reach the one that you want to listen to. Making a Reverse Track Search: Press the 4 button to display the desired track number. Press once to search back to the beginning of the current track, twice to search back to the beginning of the previous track, and so forth.
The track number currently being heard blinks in the display. Stopping to Listen to the Track Being Scanned: Press the 38 or SCAN button again to stop the scan and keep on listening to a track normally. and off. "RDM ON / Random ON" is displayed when random play is turned on. The display of the track number changes continuously as the next track is being selected. When the track has been selected, play starts. The selected track number blinks in the display as it is being played.
English CD/External disc control features Magazine Random Play (Function of disc changers) Play the tracks on all the discs in the disc changer in random order. Track time Disc name (DNPS) 1 Press the M.RDM button to switch the magazine random play function on and off. "MRDM ON / M-Random ON" is displayed when magazine random play is turned on. The display of the disc and track numbers change continuously as the next track is being selected. When the disc/track has been selected, play starts.
desired position. The 4 button moves the cursor to the left, and the ¢ button to the right. You can also move the cursor left or right by pressing the TRACK+ or TRACK– buttons, respectively, on the remote control. NOTE • The number of characters and discs whose names can be stored will differ depending on the disc changer that is connected. Please see your disc changer manual for details. Up to 8 (KDC-PS9070R) / 12 (KDC-8070R/8070W/7070R) characters and 30 CDs can be registered with this unit.
English CD/External disc control features The disc name preset play (DNPP) mode will be cancelled. Disc Name Preset Play (DNPP) Function of remote control with DNPP button If you have preset the name of a disc that you want to listen to in the disc changer, you can look for it by name and start playing it. Fast Forwarding and Reversing Disc Play 1 Press the DNPP button on the remote control. "DNPP" will appear in the display, and the disc name preset play mode is entered.
Other features Signal sensor DISP (EJECT) SRC 44W 4 LOUD SCAN RDM REP D.SCN M.RDM OFF DAB TI VOL ADJ Switching the Spectrum Analyzer Display: Each time you hold down the CLK button for one second or more, the display switches as follows: NF PTY MENU Function of the KDC-PS9070R Switching Spectrum Analyzer Display This function permits switching of the spectrum analyzer display. DISC EJECT DISP NAME.
English Other features Audio Control Setting Adjustment mode (Display) Adjust various parameters of sound quality. 1 Press the AUD button to enter the control mode. 2 Press either the FM or AM button. Bass ("Bas") Each time the button is pressed, the adjustment mode will change as follows: Pressing the FM button advances the display, and pressing the AM button reverses it.
Function of the KDC-PS9070R Switching Graphic Display Mode display This function permits the graphic display to be switched to one that is linked with the volume level value or to display various modes. The initial setting is ON (displaying various modes). Track time (Only during disc play) Turning the Graphic Display On/Off: 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.
English Other features Function of the KDC-PS9070R / KDC-8070R / KDC-8070W Dimmer Switching preout You can dim the display. Switch the preout between the rear and non-fading. When you switch to non-fading, you can adjust the volume separately. The factory default is rear preout. Switching the preout: (KDC-8070R/8070W only) 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.
phone. When the telephone rings: When a call is received, "CALL" is displayed and all the unit functions are temporarily interrupted. Restoring Original Unit Source During Phone Call: Press the SRC button. "CALL" disappears from the display, and the volume of the original source is restored gradually. Turning TEL Mute Function Off After Phone Call: Hang the phone up. "CALL" disappears from the display. The original source (i.e.
English Other features Turning Automatic Time Adjustment On/Off: 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. Function of the KDC-8070R/KDC-8070W/KDC-7070R Contrast Adjustment This adjustment permits easy viewing of the display. 2 Press the ¢ button repeatedly until the Automatic Time To adjust the contrast: 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.
procedure in step 4. Mask Key If you have transmitted the Mask Key's signal once to the unit in advance, you will have to transmit it once again if the unit has been removed from the battery. This function helps prevent theft. When using the unit for the first time: In order to deactivate the demonstration mode, be sure to press the transmit button to transmit the Mask key's signal.
English Other features Press the ¡ (EJECT) button to make the faceplate slide open, and then adjust the faceplate angle using the angle adjustment switch. Adjustment may be made from 0 to 2. Function of the KDC-PS9070R Dual Zone System The following operation allows separate sound sources to control the output of the front and rear speakers. The Dual zone system can only be switched on or off when the source is set to the AUX mode.
Press the FM button to change the setting number of times higher, and press the AM button to change it lower. Settings may be made from 1 to 3. Function of the KDC-PS9070R Dimmer level adjustment You can adjust the Dimmer level of the unit separately when your car's light switch has been turned on or off. 4 Press the MENU button to end the menu mode. NOTE To adjust the Dimmer level: 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.
Basic Operations of steering remote control English Other features Optional for the KDC-7070R External Amp Control Adjust the bass boost level of the external amplifier using the main unit. ¢ Switching the bass boost level: 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. FM/DISC + u 2 Press the ¢ button repeatedly until the External amp control UP function appears in the display. Press the 4 button to search in the other direction.
2WARNING To prevent accidents, do not attempt to use the steering remote control whilst turning the steering wheel. Loading and Replacing the Lithium Battery: Use one lithium battery (CR2025). Insert the battery with the + and – poles aligned properly, following the illustration. • The AUX mode is available only when the changer / AUX switching adapter (KCA-S210A or CA-C1AX) or CD changer (KDC-CPS82 or KDC-CX82) is connected to this unit. During the AUX mode, "AUX" will show in the display.
Basic Operations of steering remote control English Optional for the KDC-7070R CD/External disc control features • DISC buttons (for disc changers) Press the AM/DISC– button to search through the discs backwards. Press the FM/DISC+ button to search through the discs forwards. • TRACK buttons Press the 4 button to search through the tracks backwards. Press the ¢ button to search through the tracks forwards. Accessories External view ......... Number of items External view .........
Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the -terminal of the battery. 2. Make the proper input and output cable connections for each unit. 3. Connect the cable on the wiring harness. 4. Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle. 5. Take Connector A on the wiring harness and connect it to the external power connector on your vehicle. 6. Connect the wiring harness connector to the unit. 7.
Connecting Cables to Terminals Antenna Conversion Adaptor (ISO–JASO) (Accessory3) Non-fading right output (Red) Antenna Cord (ISO) (KDC-PS9070R only) Display Data Output Jack Non-fading left output (White) Outputs data (KDC-PS9070R only) representing the unit's Connector Function Guide Pin Numbers for Cable Colour ISO Connectors Battery Power Control Dimmer Ignition (ACC) Earth (Ground) Connection current state, causing it to appear in the external display.
Installtion 2WARNING Connecting the ISO Connector (see p.40) The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2 or 3, make the connection as illustrated.
Removing the Unit ■ Removing the Unit English ■ Removing the hard rubber frame Insert the removal tool into the indentations in the hard rubber frame, and pull it gently until the lock is released. 1 Make the faceplate control panel appear. NOTE When the control panel of the faceplate is hidden, the unit will be locked by the sleeve, making it more difficult to remove the unit. 2 Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame.
Attaching Steering Remote Control (Optional for the KDC-7070R) Mounting Example 5 6 7 8 ,,,,,,,, ,,,,, ,,,,,,,,,, ,,,,,,,,,, ,,,,,,,,,,,, ,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,, ,,,,,,,,,,,,,, ,,,,,,,,,,, , , ,, , ,,,,,,,,,, ,,,,,,,, , ,, ,,, ,, ,,,,,,,,,,,,,,, , , ,,,,,,,,,,,,,,, ,,,,,,,,,,, Attach the operation section and the light emitting section of the Steering Remote Control as shown above.
English Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM The power does not turn on. POSSIBLE CAUSE SOLUTION The fuse has blown. After checking for short circuits in the cables, replace the fuse with one having the same rating. No ACC position on vehicle ignition. Connect the same cable to the ignition as the battery cable.
PROBLEM A CD ejects as soon as it is loaded. POSSIBLE CAUSE SOLUTION The CD is upside-down. Load the CD with the labelled side up. The CD is quite dirty. Clean the CD, referring to the section on "Cleaning CDs" (see page 5). The sound skips on a CD. The CD is scratched or dirty. Clean the CD, referring to the section on "Cleaning CDs" (see page 5). The specified track does not play. Random play has been selected. Turn off the random play function.
English Troubleshooting Guide The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. EJECT No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. ] Load the disc magazine properly. No CD in the unit. ] Insert the CD. NO DISC No disc has been loaded in the disc magazine. ] Load a disc into the disc magazine. E-04 No disc has been loaded in the disc magazine. ] Load a disc into the disc magazine.
Specifications Specifications subject to change without notice. FM tuner section Audio section Frequency Range (50 kHz Space) ...................................87.5 MHz-108.0 MHz Usable Sensitivity (S/N: 26dB) ....................................0.7 µV/75 Ω Quieting Sensitivity (S/N: 46dB) .................................1.6 µV/75 Ω Frequency Response (±3.0dB) .................................30 Hz-15 kHz Signal to Noise ratio .............................................65 dB (MONO) Selectivity ......
