KDC-X715/8015/715S(K) Cover r3 00.12.29 1:53 PM KDC-X715 KDC-8015 KDC-715S Page 1 CD-RECEIVER INSTRUCTION MANUAL COMPACT DIGITAL AUDIO Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 2 English Contents Before use Magazine Random Play .....................................................................26 Switching Display for Discs ...............................................................26 Text Scroll ..........................................................................................26 Presetting Disc Names (DNPS) .........................................................28 Disc Name Preset Play (DNPP) .............................
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 3 2Warning 2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. KENWOOD CORPORATION 2967-3, ISHIKAWA-CHO, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 4 English Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION To prevent injury or fire, take the following precautions: To prevent damage to the machine, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery, or ground wires, make sure to use automotivegrade wires or other wires with a 0.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 5 NOTE • If you experience problems during installation, consult your Kenwood dealer. • If the unit fails to operate properly, press the RESET button. When the faceplate controls are not visible, press the left part at the upper side of the faceplate (as illustrated on p.13) for as many times as you have preset to make the faceplate controls appear. The unit returns to factory settings when the RESET button is pressed.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 6 English Handling Compact discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 7 General features d 4 u SRC ¡ FM ¢ Power You can help prevent theft of the unit by reversing the faceplate so that the control panel cannot be seen, hiding the unit, and shutting off the audio. EJECT AUTO AME ATT / LOUD #1 - 6 DISP AUD AM/NF CLK Power ON/OFF: When you turn your vehicle's ignition on, the unit's power will also turn on, with the faceplate reversing to show the control panel.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 8 English General features Switching Modes Switching Modes: Each time you press the SRC (source) button, the mode switches as follows: ▼ Volume Increasing Volume: Press the u button to turn up the volume. Decreasing Volume: Press the d button to turn down the volume. Tuner mode ▼ CD mode ▼ External disc control mode 1 ▼ External disc control mode 2/AUX mode ▼ Standby mode Selecting standby mode: Press the SRC button repeatedly and switch to "ALL OFF" .
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 9 Function of the KDC-X715 Audio Control Setting Adjust various parameters of sound quality. 1 Press the AUD button to enter the control mode. 2 Selecting mode Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change. Please refer to the following for the contents of the adjustment modes.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 10 English General features Function of the KDC-X715 Function of the KDC-X715 "TreF" : Adjust the center frequency of the treble. Setting values: 10.0 / 12.5 / 15.0 / 17.5 kHz NOTE This mode is available only when the Sound coordinate system is on. ( page36). "HPF F" : Adjust the frequency of the High-pass filter for front output.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 11 Function of the KDC-X715 Function of the KDC-X715 "NF Phase" : Adjust the phase for Non-Fading output. Setting values: Normal (0°) / Reverse (180°) NOTE • This mode is available only when the non-fading output function is set to on. • Not available during the Dual zone system is on.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 12 English General features Hiding the unit with the ignition turned on (forced closing): Press the SRC button for at least one second. The faceplate will slide open. When the period of time which you have set in the "Time setting for removing the faceplate" in the menu has passed, the faceplate automatically reverses to hide the control panel. However, you can remove the faceplate during that period. For details, refer to the "Removing the faceplate" (page14).
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 13 Faceplate Angle Adjustment You can adjust the faceplate angle for easy viewing. Adjusting faceplate angle: Press the ¡ (EJECT) button to make the faceplate slide open, and then adjust the faceplate angle using the angle adjustment switch. Adjustment may be made from 0 to 2. 0 1 2 0 1 2 2 0 1 NOTE • Firmly slide the switch until it clicks. • Do not apply excessive force to the faceplate under settings 1 or 2.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 14 English General features Removing the Faceplate The faceplate can be detached from the unit, helping to deter theft. Removing the faceplate: 1 Choose the way from among the following and open the faceplate. Turn the ignition off, press the SRC button for at least one second, or press the left part at the upper side of the faceplate (as illustrated on p.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 15 Tuner features the faceplate was mounted, check that the faceplate is securely attached to the faceplate bracket by holding its right side and pulling it gently towards you. 4 38 SRC FM ¢ EJECT AUTO AME #1 - 6 DISP/NAME.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 16 English Tuner features received. Tuning You can choose from three tuning modes: auto seek, preset station seek, and manual. The "AUTO 1" indicator lights up when auto seek tuning is selected, and the "AUTO 2" indicator lights when preset station seek tuning is selected. Station Preset Memory Store the frequency of a station. You can then recall that station with a single touch of a button. Selecting Tuning Mode: Press the AUTO button.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 17 Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed. Switching Display for Tuner You can change the display used when listening to the radio.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 18 English Tuner features Station Name Preset (SNPS) Character Button to press # Times pressed You can assign names to radio stations with the Station Preset Memory. Up to 32 FM stations and 16 AM stations can be assigned names. “D” #3 1 “A” #2 1 1 Adjust the frequency to the station whose name you want to “N” #6 2 “C” #2 3 “E” #3 2 enter.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 19 RDS features Function of the KDC-X715 1 Press the DNPP button on the remote. 4 "SNPP" will be displayed once the station name preset play mode is entered. The names of the stations stored in the band currently listened to are displayed in the following order for five seconds each: 38(PTY) FM EJECT = FM1 Ô FM2 Ô FM3 Ô AM + Each time you press the ¢ button, the station display switches in the forward direction.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 20 RDS features English Function of the KDC-X715 4. Talk (TALK) 5. Rock (ROCK) 6. Classic Rock (CLS ROCK) 7. Adult Hits (ADLT HIT) 8. Soft Rock (SOFT RCK) 9. Top 40 (TOP 40) 10. Country (COUNTRY) 11. Oldies (OLDIES) 12. Soft (SOFT) 13. Nostalgia (NOSTALGA) 14. Jazz (JAZZ) 15. Classical (CLASSICL) 16. R&B (R & B) 17. Soft R&B (SOFT R&B) 18. Language (LANGUAGE) 19. Religious Music (REL MUSC) 20. Religious Talk (REL TALK) 21. Personality (PERSNLTY) 22.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 21 3 above. Switching to Other Stations with the Same Type of Program: When "PTY" is blinking in the display, perform auto seek tuning. The tuner scans for another station with the same type of program. Canceling Program Type Function During Its Operation: Press the 38(PTY) button. Confirming Program Type: Press the DISP button. The program type of the station currently tuned to will be displayed for two seconds. During that time, "E" will blink in the display.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 22 English CD/External disc control features 4 DISC+ 38 SRC ¡ ¢ EJECT AUTO AME SCAN Disc number RDM REP DISP D.SCN DISP/NAME.S M.RDM Track number Track time DISC– IN indicator ■ When a unit equipped with an O-N switch is to be connected, please also see the instruction manual of this unit. Set the O-N switch to "N". "N"-operation will be set. "N"-operation: • The disc title and track title of the CD text can be displayed.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 23 Pausing and Restarting CD Play: Press the 38 button to make the disc pause. Press the same button again to start play again. Eject: Press the ¡(EJECT) button. The faceplate will slide to eject the CD. Press the ¡(EJECT) button to close the faceplate. 2CAUTION • Do not attempt to insert a CD into the slot if another one is already there. • The unit can only play 5 in. CDs. If you insert a 3 in. CD, it will get stuck inside and can cause the unit to malfunction.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 24 English CD/External disc control features Play starts at the beginning of the displayed disc. Track Search NOTE Search forward or backward through the tracks on the disc until you reach the one that you want to listen to. "LOAD" is displayed when discs are being exchanged on the disc changer. Making a Reverse Track Search: Press the 4 button to display the desired track number.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 25 NOTE • Input "0" to select disc 10. • If you input more than two numbers all at once, a search will be made only of the last number input. 2 Press either the DISC+ or DISC– button while the number inputted is blinking. The disc starts playing. Canceling Direct Disc Search While It Is Operating: Press the 38 button. NOTE • The track scan function is canceled when you eject the disc. • The track scan function only scans each track on a disc once.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 26 English CD/External disc control features KDC-C200/C300/C400/C301/C401 Random Play 2 To change the track being heard, press the ¢ button. Play all the tracks on the current disc in random order. Another disc/track will be selected and played. 1 Press the RDM button to switch random play on and off. NOTE "Random ON" is displayed when random play is turned on. The track number will change over and over in the display as the next track is being selected.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 27 Text Scroll This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu. To scroll automatically: Press the DISP button to display the disc title or the track title. The display of the text will be scrolled repeatedly. To scroll manually: 1 Press the DISP button to display the disc title or the track title.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 28 English CD/External disc control features Presetting Disc Names (DNPS) NOTE The operation and characters that can be entered may change as listed below, depending on the unit that is connected. A press of the 38 button exits the disc name preset mode. Operations can be followed again from Step 2 at a time such as this, and the characters to be input are selected using the procedure described below.
KDC-X715_U.S_r9 00.12.26 3:47 PM Page 29 connected. Please see your disc changer manual for details. Up to 8 characters and 30 CDs can be registered with this unit. • Discs are identified by their total length and number of tracks. If another disc happens to have the same specifications as one that you have already stored a name for, the name will be displayed for it, too.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 30 English Menu settings 4 38 FM ¢ EJECT Menu System You can set the defaults for additional functions in the menu mode. Make a setting for each function, referring to the following operations. 1 Enter the menu mode AUTO AME DISP Press the MENU button for at least one second. "MENU" is displayed when the menu mode is entered. The function that you can adjust is indicated with the current settings displayed.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 31 Touch Sensor Tone Calendar Adjustment This function produces a beep sound that accompanies button operation. It can be switched on or off. Adjust the date for the unit so that you can use the calendar function. Display and setting: "Beep ON" : Beep setting is on. "Beep OFF" : Beep setting is off. Display and setting: 1 Select the display "Date Adjust" during the selecting function in the menu system. NOTE The beep sound is not output from the preout jacks.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 32 English Menu settings Memo Mode Alphabet (upper case): A ~ Z You can input the text to be displayed and set the date when that text will appear in the display with the calendar function. Alphabet (lower case): a ~ z Display and setting: 1 Select the display "Memo Mode" during the selecting function in the menu mode.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 33 Adjusting Time Automatically: Tune to a RDS station and receive the signal for several minutes. The clock will adjust automatically to the local time. NOTE The clock will not adjust automatically if the RDS station tuned to is not transmitting time data. In such a case, try another RDS station.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 34 English Menu settings Security Code When the battery is removed from the unit's power switch, you cannot turn on the unit again unless the preset security code is input. This function helps prevent theft. NOTE You must follow steps 1 to 9 to be able to use the Security Code function. Turning off the power during the procedure will deactivate the security code setting. Once the security code function has been activated, "Security" disappears from the MENU system.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 35 "Graphic ON" : The graphic display works. "Graphic OFF" : The graphic display does not work. Selectable Illumination You can switch the color of the button illumination between green and red. Display and setting: "Color Green" : The color of the illumination is green. "Color Red" : The color of the illumination is red. Black Mask This function allows you to turn off the lower part of the display if there is too much information in the display.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 36 English Menu settings Function of the KDC-X715 KEX/ec4/dB (Sound Coordinate system) Switching preout Switch the preout between the rear and non-fading. When you switch to non-fading, you can adjust the volume separately. The factory default is rear preout.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 37 Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned on. In such a situation, turn it off. Function of the KDC-X715 Traffic Information Function You can listen to traffic information. If you are listening to tapes or discs, they will continue playing until a traffic bulletin is broadcast. Display and setting: "TI ON" : The Traffic Information function is on.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 38 English Menu settings Text Scroll Basic Operations of remote Optional for the KDC-715S KDC-X715 This function permits the CD text, MD title, Radio text, and Calender function to be scrolled and the entire text to be displayed. Switching between manual scrolling and automatic scrolling is permitted. The factory default is automatic scrolling.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 39 2CAUTION Do not set the remote on hot places such as above the dashboard. Loading and Replacing the Batteries: Use two "AAA"-size batteries. Slide the cover while pressing downwards to remove it as illustrated. Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. Basic operations • VOLUME buttons Press the + button to turn the volume up. Press the – button to turn the volume down.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 40 Basic Operations of remote English Optional for the KDC-715S Tuner features • 4/¢ (TUNE) buttons Press the 4 button to make decreasing seeks (using the preset tuning mode). Press the ¢ button to make increasing seeks (using the preset tuning mode). Use to move the cursor left or right during station name input. • AM/FM button Press the AM button to select the AM band. Press the FM button to select and switch between FM1, FM2, and FM3 bands.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 41 Accessories Installation Procedure External view ......... Number of items External view ......... Number of items 1 7 .........1 .........1 2 8 N T R T N .........1 9 R L N L T .........1 3 N T 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the speaker wires of the wiring harness. 4.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 42 Connecting Wires to Terminals Rear right output (Red) /Non-fading right output (KDC-X715 only) Rear left output (White) /Non-fading left output (White) (KDC-X715 only) 2CAUTION When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear).
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 43 Installation (non-Japanese cars) Locking the faceplate to the unit ■ Installation (non-Japanese cars) ■ Locking the faceplate to the unit If you want to lock the faceplate to the unit so that it does not fall off, follow the directions below. Firewall or metal support 1 Refer to the function "Removing the faceplate (page 14)" and remove the faceplate.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 44 Removing the Unit ■ Removing the Unit Insert the removal tool into the indentations in the hard rubber frame, and pull it gently until the lock is released. 1 Make the faceplate control panel appear. 2 Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame. 3 Remove the hex head machine screw with washer (M4×8) on the back panel.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 45 Installation (Japanese-cars) ■ Installing Radio Bracket in Japanese-made Cars (J-Cars) On the factory-installed radio bracket, flatten all the tabs or holes that are not flush (except those used for screws), using a hammer or similar utensil. Hole Tab Accessory8 J-Car Bracket (follow indications for L/R) After aligning the J-Car bracket with the factory-installed radio bracket, tighten the screws.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 46 English Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM The power does not turn on. No sound can be heard, or the volume is low. POSSIBLE CAUSE The fuse has blown. SOLUTION After checking for short circuits in the wires, replace the fuse with one with the same rating. Attenuator is turned on.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 47 Troubleshooting Guide PROBLEM The faceplate does not open or close. POSSIBLE CAUSE The faceplate is incorrectly attached. SOLUTION Reattach the faceplate correctly, See the section on "Rremoving the Faceplate".(page.14) CD/MD/External disc control mode PROBLEM POSSIBLE CAUSE SOLUTION The disc control mode cannot be selected. No wire has been connected to the disc changer input terminal on the unit.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 48 English Troubleshooting Guide The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. EJECT No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. ] Load the disc magazine properly. No CD in the unit. ] Insert the CD. NO DISC No disc has been loaded in the disc magazine. ] Load a disc into the disc magazine. E-04 No disc has been loaded in the disc magazine.
KDC-X715_U.S_r9 00.12.26 3:48 PM Page 49 Specifications Specifications subject to change without notice. FM tuner section Audio section Frequency Range (200 kHz Space) ...................87.9 – 107.9 MHz Usable Sensitivity (S/N: 30dB) .....................9.3 dBf (0.8 µV/75 Ω) Quieting Sensitivity (S/N: 50dB) ................15.2 dBf (1.6 µV/75 Ω) Frequency Response (±3.0dB)..............................30 Hz – 15 kHz Signal to Noise ratio .............................................
KDC-X715_U.S_r9 00.12.
KDC-X715_U.S_r9 00.12.
KDC-X715_U.S_r9 00.12.