Owner's Manual

12
iHeartRadio®
Search and store a station
1
Press .
2 Turn the volume knob to select a category, then press the
knob.
3 Turn the volume knob (or press J / K on the remote
control) to select the desired station.
4 Press the volume knob (or press on the remote
control) to confirm.
When a city list appears, you can search cities in
alphabetical order by turning the volume knob quickly.
To cancel, press and hold
.
To store a station: Press and hold one of the number buttons
(3, 4or5).
To select a stored station: Press one of the number buttons
(3, 4or5).
ENGLISH
BLUETOOTH®
BLUETOOTH — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
Connect the microphone
Pair and connect a Bluetooth device for the first time
1
Press to turn on the unit.
2 Search and select this unit model name (“KDC-BT3
**
U”/“KDC-BT3
*
”) on the
Bluetooth device.
“PAIRING”
“PASS XXXXXX” Device name “PRESS” “VOLUME KNOB”
appears on the display.
• For some Bluetooth devices, you may need to enter the Personal Identification
Number (PIN) code immediately after searching.
3 Press the volume knob to start pairing.
“PAIRING OK” appears when pairing is completed.
Adjust the
microphone angle
Secure using cord clamps (not
supplied) if necessary.
Microphone input
jack
Microphone
(supplied)
Rear panel
JS_KWD_KDC_BT368U_KN_EN_4.indd 12 20/5/2016 9:00:18 AM