Owner's Manual
Table Of Contents
14
ENGLISH
BLUETOOTH®
To On the faceplate On the remote control
First incoming call...
Answer a call
Press
or the volume knob
or one of the number buttons
(1 to 6).
Press
.
Reject a call
Press
.
Press
.
End a call
Press
.
Press
.
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Press
. Press .
Reject another incoming
call
Press
.
Press
.
While having two active calls...
End current call and
activate held call
Press
.
Press
.
Swap between the
current call and held call
Press
. Press .
Adjust the phone volume
[00]
to
[35]
(Default:
[15]
)
Turn the volume knob during
a call.
• This adjustment will not
affect the volume of the other
sources.
( Not available )
Switch between hands-free
and private talk modes
Press
during a call.
• Operations may vary
according to the connected
Bluetooth device.
( Not available )
Improve the voice quality
While talking on the phone...
1 Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to select an item (see the
following table), then press the knob.
3 Repeat step 2 until the desired item is selected or
activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
MIC GAIN LEVEL –10
to
LEVEL +10
(
LEVEL –4
):The sensitivity
of the microphone increases as the number increased.
NR LEVEL LEVEL –5
to
LEVEL +5
(
LEVEL 0
):Adjust the noise
reduction level until the least noise is being heard
during a phone conversation.
ECHO CANCEL LEVEL –5
to
LEVEL +5
(
LEVEL 0
):Adjust the echo
cancellation delay time until the least echo is being
heard during a phone conversation.
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select an item
( 15)
, then
press the knob.
3 Repeat step 2 until the desired item is selected or
activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
JS_KWD_KDC_BT368U_KN_EN_4.indd 14 20/5/2016 9:00:19 AM