Owner's Manual

ENGLISH
19
AUDIO SETTINGS
While listening to any source...
1 Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press
.
(or using the remote control)
1 Press AUD to enter [AUDIO CONTROL] .
2 Press J / K to select an item, then press .
Default:
XX
AUDIO CONTROL
SUB-W LEVEL
LEVEL –50 to LEVEL +10 ( LEVEL 0 ): Adjusts the subwoofer output
level.
MANUAL EQ The sound elements (frequency level, tone level, Q factor) are preset into
each selection (
BAND1 LEVEL to BAND13 LEVEL ).
BAND1 LEVEL
LEVEL
LEVEL–9 to LEVEL +9 ( LEVEL 0 ):Adjusts the level to memorize for
each source. (Before making an adjustment, select the source you want
to adjust.)
BASS EXTEND ON :Turns on the extended bass.; OFF :Cancels.
BAND2 LEVEL to
BAND13 LEVEL
LEVEL–9 to LEVEL +9 ( LEVEL 0 ):Adjusts the level to memorize for
each source. (Before making an adjustment, select the source you want
to adjust.)
Q FACTOR 1.35 / 1.50 / 2.00 :Adjust the quality factor.
PRESET EQ NATURAL / ROCK / POPS / EASY / TOP40 / JAZZ / POWERFUL / USER :
Selects a preset equalizer suitable to the music genre. (Select
[USER] to
use the settings made in
[MANUAL EQ] .)
BASS BOOST LEVEL1 / LEVEL2 / LEVEL3 / LEVEL4 / LEVEL5 :Selects your preferred bass
boost level.;
OFF :Cancels.
LOUDNESS LEVEL1 / LEVEL2 :Selects your preferred low and high frequencies boost
to produce a well-balanced sound at a low volume level.;
OFF :Cancels.
SUBWOOFER SET ON :Turns on the subwoofer output.; OFF :Cancels.
FADER POSITION REAR 15 to POSITION FRONT15 ( POSITION 0 ): Adjusts
the rear and front speaker output balance.
BALANCE POSITION LEFT 15 to POSITION RIGHT15 ( POSITION 0 ):Adjusts the
left and right speaker output balance.
VOLUME OFFSET LEVEL –15 to LEVEL +6 ( LEVEL 0 ):Preset the initial volume level of
each source. (Before adjustment, select the source you want to adjust.)
SOUND EFFECT
SOUND RECNSTR
(Sound
reconstruction)
(Not applicable for TUNER source and AUX source.)
ON :Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression.;
OFF :Cancels.
SPACE ENHANCE (Not applicable for TUNER source.)
SMALL / MEDIUM / LARGE :Virtually enhances the sound space.;
OFF :Cancels.
SND REALIZER LEVEL1 / LEVEL2 / LEVEL3 :Virtually makes the sound more realistic.;
OFF :Cancels.
STAGE EQ LOW / MIDDLE / HIGH :Virtually adjust the sound position heard from
the speakers.;
OFF :Cancels.
DRIVE EQ ON : Boosts the frequency to reduce the noise heard from outside the
car or running noise of the tyres.;
OFF :Cancels.
JS_KWD_KDC_BT368U_KN_EN_4.indd 19 20/5/2016 9:00:19 AM