Owner's Manual
Table Of Contents
20
AUDIO SETTINGS
SPEAKER SIZE
The frequency and slope settings are automatically set for the crossover of
the selected speaker.
FRONT SIZE 3.5”
/
4”
/
4.75”
/
5”
/
6.5”
/
6.75”
/
7”
/
4×6
/
5×7
/
6×8
/
6×9
/
7×10
: Selects according to the connected speaker size for
optimum performance.
TWEETER SMALL
/
MIDDLE
/
LARGE
:Selects according to the size
range of the connected tweeter for optimum performance.;
NONE
:Not connected.
REAR 3.5”
/
4”
/
4.75”
/
5”
/
6.5”
/
6.75”
/
7”
/
4×6
/
5×7
/
6×8
/
6×9
/
7×10
: Selects
according to the connected speaker size for optimum performance.;
NONE
:Not connected.
SUBWOOFER 6.5”
/
8”
/
10”
/
12”
/
15” OVER
: Selects according to the connected speaker size
for optimum performance.;
NONE
:Not connected.
X ' OVER
TWEETER FRQ
1KHZ
/
1.6KHZ
/
2.5KHZ
/
4KHZ
/
5KHZ
/
6.3KHZ
/
8KHZ
/
10KHZ
/
12.5KHZ: Adjusts the crossover frequency for the
tweeter speaker.
GAIN LEFT
–8
to
0
:Adjusts the output volume of the left tweeter.
GAIN RIGHT –8
to
0
:Adjusts the output volume of the right tweeter.
FRONT HPF F - HPF FRQ 30HZ
/
40HZ
/
50HZ
/
60HZ
/
70HZ
/
80HZ
/
90HZ
/
100HZ
/
120HZ
/
150HZ
/
180HZ
/
220HZ
/
250HZ: Adjusts the
crossover frequency for the selected speakers (high pass
filter).
;
THROUGH
: All signals are sent to the selected
speakers.
F - HPF SLOPE –6DB
/
–12DB
/
–18DB
/
–24DB: Adjusts the crossover
slope.
(Selectable only if a setting other than
[THROUGH]
is
selected for
[F - HPF FRQ]
.)
F - HPF GAIN –8
to
0
:Adjusts the output volume of the selected speaker.
REAR HPF R - HPF FRQ
(Refer
FRONT HPF
settings.)
R - HPF SLOPE
R - HPF GAIN
SUBWOOFER LPF SW LPF FRQ
30HZ
/
40HZ
/
50HZ
/
60HZ
/
70HZ
/
80HZ
/
90HZ
/
100HZ
/
120HZ
/
150HZ
/
180HZ
/
220HZ
/
250HZ
:
Adjusts the crossover frequency for the subwoofer
(low pass filter).;
THROUGH
: All signals are sent to
the subwoofer.
SW LPF SLOPE –6DB
/
–12DB
/
–18DB
/
–24DB: Adjusts the
crossover slope.
(Selectable only if a setting other than
[THROUGH]
is
selected for
[SW LPF FRQ]
.)
SW LPF PHASE REVERSE
(180°)/
NORMAL
(0°): Selects the phase
of the subwoofer output to be in line with the
speaker output for optimum performance.
SW LPF GAIN –8
to
0
:Adjusts the output volume of the
subwoofer.
DTA SETTINGS
Digital Time Alignment sets the delay time of the speaker output to
create a more suitable environment for your vehicle.
For more information, refer to the illustration on page 21.
POSITION
Selects your listening position (reference point).
ALL
:Not compensating;
FRONT RIGHT:
Front right seat;
FRONT LEFT
:Front left seat;
FRONT ALL
:Front seat
DISTANCE 0FT
to
20.01FT
:Fine adjust the distance to compensate. (Before
making an adjustment, select the speaker you want to adjust.)
GAIN –8DB
to
0DB
:Fine adjust the output volume of the selected speaker.
(Before making an adjustment, select the speaker you want to adjust.)
DTA RESET YES
:Resets the settings (
[DISTANCE]
and
[GAIN]
) of the selected
[POSITION]
to default.;
NO
:Cancels.
ENGLISH
JS_KWD_KDC_BT368U_KN_EN_5.indd 20 31/5/2016 10:46:40 AM