Owner's Manual

22
DISPLAY SETTINGS
Default: XX
DISPLAY
COLOR SELECT
Select color for ALL ZONE , ZONE 1 and ZONE 2 separately.
1 Select a zone. ( 21)
2 Select a color for the selected zone.
VARIABLE SCAN / CUSTOM R/G/B /preset colors*
To make your own color, select
[CUSTOM R/G/B] . The color you have
made will be stored in
[CUSTOM R/G/B] .
1 Press the volume knob to enter the detailed color adjustment.
2 Press S / T to select the color ( R / G / B ) to adjust.
3 Turn the volume knob to adjust the level ( 0 — 9 ), then press the
knob.
DIMMER Dim the illumination.
ON :Dimmer is turned on.; OFF :Cancels.
DIMMER TIME :Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default:
[ON] : PM 6:00 ; [OFF] : AM 6:00 )
BRIGHTNESS 1 Select a zone. ( 21)
2 LEVEL 0 to LEVEL 31 : Select your preferred brightness level for the
selected zone.
TEXT SCROLL SCROLL AUTO / SCROLL ONCE :Select whether to scroll the display
information automatically, or scroll only once.;
SCROLL OFF :Cancels.
*
Preset colors: RED1 / RED2 / RED3 / PURPLE1 / PURPLE2 / PURPLE3 / PURPLE4 / BLUE1 /
BLUE2 / BLUE3 / SKYBLUE1 / SKYBLUE2 / LIGHTBLUE / AQUA1 / AQUA2 / GREEN1 /
GREEN2 / GREEN3 / YELLOWGREEN1 / YELLOWGREEN2 / YELLOW / ORANGE1 / ORANGE2 /
ORANGERED
TROUBLESHOOTING
Symptom Remedy
General
Sound cannot be heard.
•
Adjust the volume to the optimum level.
•
Check the cords and connections.
“MISWIRING CHECK WIRING
THEN PWR ON” appears.
Turn the power off, then check to be sure the
terminals of the speaker wires are insulated properly.
Turn the power on again.
“PROTECTING SEND SERVICE”
appears.
Send the unit to the nearest service center.
•
Sound cannot be heard.
•
The unit does not turn on.
•
Information shown on the
display is incorrect.
Clean the connectors.
( 25)
The unit does not work at all. Reset the unit. ( 3)
Radio
•
Radio reception is poor.
•
Static noise while listening
to the radio.
Connect the antenna firmly.
CD/USB/iPod
Disc cannot be ejected.
Press and hold
M to forcibly eject the disc. Be careful
not to drop the disc when it is ejected. If this does not
solve the problem, reset the unit.
( 3)
Noise is generated. Skip to another track or change the disc.
Tracks do not play back as you
intended them to play.
Playback order is determined when files are recorded.
“READING” keeps flashing. Do not use too many hierarchical levels or folders.
Elapsed playing time is not
correct.
This is caused by how the tracks are recorded.
“LOADING” appears when you
enter search mode by pressing
.
This unit is still preparing the iPod/iPhone music list.
It may take some time to load, try again later.
ENGLISH
JS_KWD_KDC_BT368U_KN_EN_4.indd 22 20/5/2016 9:00:19 AM