Owner's Manual

ENGLISH
5
SYSTEM
KEY BEEP
ON
:Activates the keypress tone.;
OFF
:Deactivates.
SOURCE SELECT
PANDORA SRC
ON
:Enables PANDORA in source selection.;
OFF
:Disables.
( 10)
IHEART SRC
ON
:Enables IHEARTRADIO in source selection.;
OFF
:Disables.
( 11)
BUILT-IN AUX
ON
:Enables AUX in source selection.;
OFF
:Disables.
( 9)
CD READ
1
:Automatically distinguishes between audio file disc and music CD.;
2
:Forces to play as a music CD. No sound can be heard if an audio file
disc is played.
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx
YES
:Starts upgrading the firmware.;
NO
:Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<www.kenwood.com/cs/ce/>.
FACTORY RESET YES
:Resets the settings to default (except the stored station).;
NO
:Cancels.
CLOCK
CLOCK DISPLAY
ON
:The clock time is shown on the display even when the unit is turned
off.;
OFF
:Cancels.
ENGLISH
Select the display language for
[FUNCTION]
menu and music
information if applicable.
By default,
[ENGLISH]
is selected.
ESPANOL
GETTING STARTED RADIO
Search for a station
1
Press repeatedly to select TUNER.
2 Press repeatedly (or press / on the remote
control) to select FM1/FM2/FM3/AM.
3 Press S/T (or press S/ on the remote control) to
search for a station.
To change the searching method for S/T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
To store a station: Press and hold one of the number buttons (1to6).
To select a stored station: Press one of the number buttons (1to6) (or
press one of the number buttons (1to6) on the remote control).
Direct Access Tuning
(using the remote control)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency.
3 Press to search for a station.
To cancel, press
or DIRECT.
If no operation is done for 10seconds after step
2, Direct Access Tuning
is automatically canceled.
JS_KWD_KDC_BT368U_KN_EN_5.indd 5 25/5/2016 4:51:51 PM