KDC-X302 KDC-BT372U KDC-BT340U KDC-BT32 KDC-BT272U KDC-BT22 KDC-MP372BT KMR-D372BT CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D’EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
IC (Industry Canada) Notice This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Note de IC (Industrie Canada) Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
SOFTWARE LICENSE AGREEMENT The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Article 8 Termination In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.
CONTENTS BEFORE USE BEFORE USE 2 IMPORTANT BASICS 3 GETTING STARTED 4 • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warning and Caution in this manual. • Please keep the manual in a safe and accessible place for future reference.
BASICS Faceplate Volume knob Remote control (RC-406) (supplied for Loading slot Display window Remote sensor (Do not expose to bright sunlight.) Lights up when Bluetooth connection is established.*1 ( 17) Detach button Attach ) Flashes when the unit enters searching status.*1 Detach How to reset Pull out the insulation sheet when using for the first time. / / / : Can be remotely controlled with an optionally purchased remote control. / / : Remote control functions are not available.
GETTING STARTED 1 Select the display language and cancel the demonstration When you turn on the power for the first time (or [FACTORY RESET] is set to [YES], 5), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB” 1 Turn the volume knob to select [ENG] (English) or [SPA] (Spanish), then press the knob. [ENG] is selected for the initial setup. Then, (except for ) the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”. 2 Press the volume knob. [YES] is selected for the initial setup.
GETTING STARTED DISPLAY EASY MENU USER S.REMO (For / / / / ) When entering [FUNCTION]... ON: ZONE 1 illumination changes to white color. ; OFF: ZONE 1 illumination remains as [COLOR SELECT] color. ( 28) • ZONE 2 illumination changes to white color when you enter [FUNCTION], irregardless of the [EASY MENU] setting. • Refer to the illustration on page 27 for ZONE identification. TUNER SETTING PRESET TYPE NORMAL: Memorizes one station for each preset button in each band (FM1/FM2/FM3/AM).
RADIO GETTING STARTED Register the marine remote ID (for ) Applicable only when you connect Kenwood Marine Remote Control unit (KCA-RC55MR, optional accessory) to this unit. • For connection, 37, Wiring connection and 38, Connecting external components. • Refer also to the supplied instruction manual of the Kenwood Marine Remote Control unit for more information. Preparation: Press repeatedly to enter STANDBY, then press the volume knob to enter [FUNCTION].
RADIO Other settings PTY SEARCH following table), then press the knob. 3 Repeat step 2 until the desired item is selected/ Default: XX / / / / / / ) Select the available Program Type, then press S / T to start. ) (For 1 Turn the volume knob to select the available Program Type, then press the knob. 2 Turn the volume knob to select the PTY language (ENGLISH/FRENCH/GERMAN), then press the knob. 3 Press S / T to start searching. 1 Press the volume knob to enter [FUNCTION].
CD/USB/iPod/ANDROID Start playback The source changes automatically and playback starts. CD M Eject disc Label side USB input terminal USB CA-U1EX (max.: 500 mA) (optional accessory) To On the faceplate On the remote control Playback/pause Press Press Reverse/Fast-forward*4 Press and hold S / T. Press and hold S / Select a track/file Press S / T. Press S / Select a folder*5 Press Press Repeat play*6 Press repeatedly.
CD/USB/iPod/ANDROID Select control mode 3 Turn the volume knob to select a file, then press the knob. While in iPod USB source, press 5 repeatedly. MODE ON: Control iPod using the iPod itself. However, you can still play/ pause, file skip, fast-forward or reverse from this unit. MODE OFF: Control iPod from this unit. Quick Search (applicable only for CD, USB and ANDROID source) While in ANDROID source, press 5 repeatedly.
AUX CD/USB/iPod/ANDROID Preparation: Select [ON] for [BUILT-IN AUX] for [SOURCE SELECT]. ( 5) Direct Music Search (using the remote control) 1 Press DIRECT. 2 Press the number buttons to enter a track/file number. 3 Press to search for music. Start listening 1 Connect a portable audio player (commercially available). or DIRECT. • To cancel, press • Not available if Random Play is selected. • Not applicable for iPod USB and ANDROID source.
Pandora® (except for ) Preparation: Install the latest version of the Pandora application on your device (iPhone/iPod touch), then create an account and log in to Pandora. • Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. ( 5) Create and save a new station 1 Press . 2 Turn the volume knob to select [NEW STATION], then press the knob. 3 Turn the volume knob to select [FROM ARTIST] or [FROM TRACK], then press the knob. A new station is created based on the artist or current song.
iHeartRadio® (except for ) Preparation: Install the latest version of iHeartAuto application on your device (iPhone/iPod touch), then create an account and log in to iHeartRadio. • Select [ON] for [IHEART SRC] in [SOURCE SELECT]. ( 5) Start listening 1 Open the iHeartAuto application on your device. 2 Connect your device to the USB input terminal.
Spotify Preparation: Install the latest version of the Spotify application on your device (iPhone/ iPod touch), then create an account and log in to Spotify. • Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. ( 5) To On the faceplate On the remote control Random play*5 Press repeatedly.*3 SHUFFLE ON/SHUFFLE OFF (Not available) *3 Available for premium account users only. *4 This feature is available for tracks in Radio only. If thumbs down is selected, the current track is skipped.
SiriusXM® Radio (for / / Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit . Preparation: 1 Connect the optional SiriusXM Vehicle Tuner (commercially available).
SiriusXM® Radio (for / / / ) SiriusXM Keymode SmartFavorites and TuneStart™ Press and hold to change the keymode (channel or replay). (Default: Channel keymode) “ ” lights up when replay keymode is selected. When channel keymode is selected... To On the faceplate On the remote control Select a channel Press S / T. Press S / Change a channel rapidly Press and hold S / T. Press and hold S/ . Store a channel of the current band Press and hold one of the number buttons (1 to 6).
SiriusXM® Radio (for / / / ) SiriusXM settings TUNE START*2 ON: All qualified music channels in the SmartFavorite will start playback from the beginning of the song. ; OFF: Cancels. SIGNAL LEVEL Shows the strength (NO SIGNAL/WEAK/GOOD/ STRONG) of the current received signal. BUFFER USAGE Shows the memory usage (0% to 100%) for Replay buffer. SXM RESET YES: Resets stored channel and lock setting to default. ; NO: Cancels. 1 Press the volume knob to enter [FUNCTION].
BLUETOOTH® BLUETOOTH — Connection Pair and connect a Bluetooth device for the first time 1 Press to turn on the unit. 2 Search and select this unit model name (KDC-X3**/KDC-BT3**/KDC-BT3*/ Supported Bluetooth profiles – Hands-Free Profile (HFP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP) KDC-BT2*/KDC-MP3**/KMR-D3**) on the Bluetooth device.
BLUETOOTH® Auto Pairing When you connect iPhone/iPod touch/Android device to the USB input terminal, pairing request (via Bluetooth) is automatically activated. Press the volume knob to pair once you have confirmed the device name. Automatic pairing request is activated only if: – Bluetooth function of the connected device is turned on. – [AUTO PAIRING] is set to [ON]. ( 21) – KENWOOD MUSIC PLAY application is installed on the Android device ( 8) and [BROWSE MODE] is selected ( 9).
BLUETOOTH® To On the faceplate While talking on the first incoming call... Answer another incoming call and hold the current call Press Reject another incoming call Press End current call and activate held call Press Swap between the current call and held call Press . Default: XX On the remote control Press . . Press . . Press . MIC GAIN –10 to +10 (–4): The sensitivity of the microphone increases as the number increased.
BLUETOOTH® Make a call PHONE BOOK (Applicable only if the phone supports PBAP.) 1 Turn the volume knob quickly to enter alphabet search mode (if the phonebook contains many contacts). The first menu (ABCDEFGHIJK) appears. • To go to the other menu (LMNOPQRSTUV or WXYZ1*), press / . • To select the desired first letter, turn the volume knob or press S / T, then press the knob. Select “1” to search with numbers and select “*” to search with symbols.
BLUETOOTH® Make a call using voice recognition 1 Press and hold to activate the voice recognition of the connected phone. 2 Speak the name of the contact you want to call or the voice command to control the phone functions. • Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details. • This unit also supports the intelligent personal assistant function of iPhone.
BLUETOOTH® BLUETOOTH — Audio Bluetooth test mode You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device paired. 1 Press and hold . “PLEASE PAIR YOUR PHONE PIN 0000” appears. 2 Search and select this unit model name (KDC-X3**/KDC-BT3**/KDC-BT3*/KDC-BT2*/ KDC-MP3**/KMR-D3**) on the Bluetooth device. 3 Operate the Bluetooth device to confirm pairing. “TESTING” flashes on the display.
BLUETOOTH® Settings to use KENWOOD Remote application STATUS KENWOOD Remote application is designed to control the KENWOOD car receiver’s operations from the iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via Bluetooth). Preparation: Install the latest version of KENWOOD Remote application on your device before connecting. For more information, visit . 1 Press the volume knob to enter [FUNCTION].
AUDIO SETTINGS BLUETOOTH® Listen to iHeartRadio (except for ) Preparation: Select [ON] for [IHEART SRC] in [SOURCE SELECT]. ( 5) 1 Open the iHeartAuto application on your device. 2 Connect your device via Bluetooth connection. ( 17) 3 Press repeatedly to select IHEARTRADIO. The source switches and broadcast starts automatically. • You can operate iHeartRadio in the same way as iHeartRadio via USB input terminal. ( 12) Listen to Spotify Preparation: Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT].
AUDIO SETTINGS BASS BOOST LEVEL1/LEVEL2/LEVEL3/LEVEL4/LEVEL5 or LV1/LV2/LV3/ LV4/LV5: Selects your preferred bass boost level. ; OFF: Cancels. LOUDNESS LEVEL1/LEVEL2 or LV1/LV2: Selects your preferred low and high frequencies boost to produce a well-balanced sound at a low volume level. ; OFF: Cancels. SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels. FADER R15 to F15 (0): Adjusts the rear and front speaker output balance.
AUDIO SETTINGS REAR HPF Digital Time Alignment settings R - HPF FRQ R - HPF SLOPE (Refer FRONT HPF settings on page 25.) R - HPF GAIN SUBWOOFER LPF SW LPF FRQ POSITION Selects your listening position (reference point). ALL: Not compensating ; FRONT RIGHT: Front right seat ; FRONT LEFT: Front left seat ; FRONT ALL: Front seat SW LPF PHASE REVERSE (180°)/NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. DISTANCE 0FT to 20.
AUDIO SETTINGS DISPLAY SETTINGS • Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS], select the speaker you want to adjust: FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER: You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a setting other than [NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE]. • [R-SP LOCATION] of [CAR SETTING] is selectable only if a setting other than [NONE] is selected for [REAR] of [SPEAKER SIZE].
LEARNING STEERING REMOTE CONTROL DISPLAY SETTINGS (for Default: XX DISPLAY COLOR SELECT*1 DIMMER Select color for ALL ZONE, ZONE 1 and ZONE 2 separately. 1 Select a zone. (See the illustration on page 27.) 2 Select a color for the selected zone. INITIAL COLOR/VARIABLE SCAN/CUSTOM R/G/B/preset colors*2 Default: / / / : VARIABLE SCAN : INITIAL COLOR To make your own color, select [CUSTOM R/G/B]. The color you have made will be stored in [CUSTOM R/G/B].
(for ) 7 Press and hold any control keys on your steering remote control which you want to assign. A list of key functions will appear on the display. NONE (default)/MUTE/SEEK UP/SEEK DOWN/VOL UP/VOL DOWN/ MODE/ON HOOK/OFF HOOK/VOICE/ENTER 8 Turn the volume knob to select a function to assign, then press the knob. The selected key function is assigned to the steering remote control key you have selected in step 7. The display returns to the key list as on step 5.
TROUBLESHOOTING Correct characters are not displayed (e.g. album name). • This unit can only display uppercase letters, numbers, and a limited number of symbols. • Depending on the display language you have selected ( 5), some characters may not be displayed correctly. “NA FILE” Make sure the disc contains supported audio files. ( 33) “NO DISC” Insert a playable disc into the loading slot. “TOC ERROR” Make sure the disc is clean and inserted properly. “PLEASE EJECT” Reset the unit.
TROUBLESHOOTING “STATION LIMIT” The number of registered stations has reached its limit. Retry after deleting unnecessary stations from your device. “CONNECT ERROR” Communication is unstable. “RATING ERROR” Registration of thumbs up/thumbs down has failed due to insufficient network connectivity. “THUMBS N/A” Registration of thumbs up/thumbs down is not allowed. “LICENSE ERROR” You try to access from a country which Pandora is not deliverable. Symptom SiriusXM® Radio No stations are found.
TROUBLESHOOTING Symptom Bluetooth® Voice calling method is not successful. Remedy • Use voice calling method in a more quiet environment. • Reduce the distance from the microphone when you speak the name. • Make sure the same voice as the registered voice tag is used. Sound is being interrupted or skipped during playback of a Bluetooth audio player. • Reduce the distance between the unit and the Bluetooth audio player. • Turn off, then turn on the unit and try to connect again.
REFERENCES Playable files • Playable audio file: For disc: MP3 (.mp3), WMA (.wma), AAC (.aac) For USB mass storage class device: MP3 (.mp3), WMA (.wma), AAC (.aac), AAC (.m4a), WAV (.wav), FLAC (.
REFERENCES Change the display information Each time you press DISP, the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg. station name, playing time) appears. Display information Source name / STANDBY Source name (Date/Clock)*1 RADIO Frequency (Date/Clock)*1 / / (For FM Radio Broadcast Data System stations only) Station name (Date/Clock)*1 Radio text (Date/Clock)*1 Radio text+ (R.
INSTALLATION/CONNECTION REFERENCES Warning Display information Source name / STANDBY Source name RADIO Frequency (*2) (*2) Clock Clock / (back to the beginning) (back to the beginning) (For FM Radio Broadcast Data System stations/FM Radio Data System stations only) Station name (*2) Radio text Radio text+ Title/Artist Frequency Clock (back to the beginning) CD or USB Caution (For CD-DA) Disc name/Artist (*2) (back to the beginning) Track title/Artist Playing time Clock (For MP3/WMA/AAC/W
INSTALLATION/CONNECTION Installing the unit (in-dash mounting) Part list for installation (A) Faceplate Do the required wiring. ( 37) (B) Trim plate Hook on the top side Orientate the trim plate as illustrated before fitting. Dashboard of your car (C) Mounting sleeve Bend the appropriate tabs to hold the mounting sleeve firmly in place. When installing without the mounting sleeve 1 Remove the mounting sleeve and trim plate from the unit.
INSTALLATION/CONNECTION Wiring connection IMPORTANT : We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Antenna terminal When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.
INSTALLATION/CONNECTION Connecting external components (For / / MIC (Microphone input terminal) ( 17) / ) (For ) To Kenwood Marine Remote Control unit, KCA-RC55MR (optional accessory) ( 6) (For ) Learning steering remote control ( 28) (For / / / Expansion port (12 V 500 mA) To the optional SiriusXM Vehicle Tuner (commercially available) ( 14) (For / Microphone input jack ( 17) / / ) ) Output terminals 38 ENGLISH JS_KWD_KDC_X302_KN_EN_7.
/ / / / : 87.9 MHz — 107.9 MHz (200 kHz space) : 87.5 MHz — 108.0 MHz (50 kHz space) 8.2 dBf (0.71 μV/75 Ω) Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.0 μV/75 Ω) Frequency Response (±3 dB) 30 Hz — 15 kHz Signal-to-Noise Ratio (MONO) 64 dB Stereo Separation (1 kHz) 40 dB Usable Sensitivity (S/N = 20 dB) USB Usable Sensitivity (S/N = 26 dB) AM Frequency Range CD player / / 530 kHz — 1 700 kHz (10 kHz space) 29 dBμ (28.
20 Hz — 20 kHz Operating Voltage 14.4 V (10.5 V — 16 V allowable) Input Maximum Voltage 1 000 mV Maximum Current Consumption 10 A Input Impedance 30 kΩ Operational Temperature Range –10°C — +60°C Maximum Output Power 50 W × 4 Installation Size (W × H × D) 182 mm × 53 mm × 158 mm (7-3/16" × 2-1/16" × 6-1/4") Full Bandwidth Power 22 W × 4 (at less than 1 % THD) 1.3 kg (2.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
