Operation Manual

ManualsBrandsKenwood ManualsMultimediaKDC-BT47SD

KDC-BT47SD

CD-RECEIVER

INSTRUCTION MANUAL

Before reading this manual, click the button below to check the latest

edition and the modified pages.

http://manual.kenwood.com/edition/im349/

CONTENTS

Safety 2

Maintenance

Preparation 3

How to attach/detach the faceplate

How to reset your unit

Remote controller

Basic Operations 4

Getting Started 6

Canceling the display demonstration

Setting the demonstration mode

Adjusting the clock

Initial settings before operations

Listening to the Radio 8

Adjust [SETTINGS] mode settings

Listening to the other external

components 9

Listening to a Disc/ USB device/ SD/

iPod 10

Start playing a disc

Start playing a USB device or iPod

Removing the USB device or iPod

Start playing an SD

Removing the SD card

Selecting Repeat Play

Selecting Random Play

All Random Play

Selecting a folder/track/file

Alphabet Search for iPod

Selecting App & iPod Control Mode

Adjust [SETTINGS] mode settings

Getting Started of Bluetooth 16

Easy Pairing function

Registering from Bluetooth devices (Pairing)

Operation of Hands-Free Phoning 18

Making a Call

Make a Voice Dialing Call

Receiving a Call

During a Call

Call Waiting

Clearing the disconnection message

Downloading the Phone Book

Listening to a Bluetooth Audio 21

Selecting Repeat Play

Selecting Random Play

Switching between Bluetooth devices

Bluetooth Setup 22

Registering a Bluetooth Device (Pairing)

Selecting the Bluetooth Device

Bluetooth Device Registration Test

Bluetooth Setup

SMS (Short Message Service) 26

Downloading the SMS

Display the SMS

Return message setting

Creating an original message

SMS Setup

Function settings 28

Using the remote controller

(KCA-RC405 ; optional accessory) 30

Remote sensor

Changing the battery of the remote control

unit

Operation of Hands-Free Phoning

Direct Access Tuning of “TUNER” source

Direct Music Search of “USB”/ “SD”/ “CD”

source

Installation/connection 32

Troubleshooting 37

Specifications 39

Check the latest edition

Summary of content (21 pages)

PAGE 1
CONTENTS Safety 2 Maintenance Preparation KDC-BT47SD CD-RECEIVER INSTRUCTION MANUAL 3 How to attach/detach the faceplate How to reset your unit Remote controller Basic Operations 4 Getting Started 6 Canceling the display demonstration Setting the demonstration mode Adjusting the clock Initial settings before operations Listening to the Radio 8 Listening to a Disc/ USB device/ SD/ iPod 10 Before reading this manual, click the button below to check the latest edition and the modified pages.
PAGE 2
Safety ¤WARNING Stop the car before operating the unit. Important to know... To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. ■■ Caution: Adjust the volume so that you can hear the sound outside the car. Driving with the volume adjusted to a too high level may cause an accident. ■■ Condensation: When the car is airconditioned, moisture may collect on the laser lens. This may cause disc read errors.
PAGE 3
Basic Operations Loading slot Ejects the disc VOICE PAR iPod Volume knob Display window Detaches the faceplate The following indicator lights up when... ST: A stereo broadcast is received. RDS: R adio Data System service is available. TI: Traffic Information function is turned on. IN: A disc is in the unit. ATT: T he sound attenuates. EQ: [PRESET EQ] is set to an EQ mode other than [NATURAL]. (page 28) B.BOOST: [BASS BOOST] is set to [LV1], [LV2] or [LV3].
PAGE 4
CONTENTS Getting Started Canceling the display demonstration The display demonstration is always turned on unless you cancel it. Initial settings before operations Adjusting the clock 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. When you turn on the power (or after you reset the unit), the display shows: [CANCEL DEMO] \ [PRESS] \ [VOLUME KNOB] 1 Press the volume knob. [YES] is selected as the initial setup.
PAGE 5
CONTENTS Listening to the Radio Item AUTO TP SEEK Selectable setting (Preset: *) ON *: Automatically searches for a station with better reception when the traffic information’s reception is poor. ; OFF: Cancels. [TI/ NEWS SET/ AF SET/ REGIONAL/ AUTO TP SEEK] is selectable only when the source is “FM”. If other playback source is selected, these settings are selectable under [TUNER SET] item. (page 29) ■■ [LOCAL SEEK/ MONO SET/ PTY SEARCH] is selectable only when the source is “FM”.
PAGE 6
Listening to a Disc/ USB device/ SD/ iPod Release button Loading slot Ejects the disc. (“NO DISC” appears and “IN” indicator goes off.) CONTENTS Start playing an SD Selecting Repeat Play 1 Press SRC to turn on the power. 2 Press the Release button to Detach the Press number button 4 (REP) repeatedly to make a selection. Audio CD : TRACK REPEAT, REPEAT OFF Audio File : FILE REPEAT, FOLDER REPEAT, REPEAT OFF iPod : FILE REPEAT, REPEAT OFF faceplate.
PAGE 7
CONTENTS Alphabet Search for iPod Adjust [SETTINGS] mode settings 1 Press While listening to an iPod or KENWOOD Music Editor media ... 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to select [SKIP SEARCH], then press to enter. 4 Turn the volume knob to make a selection, then press to confirm. 0.5% (initial)/ 1%/ 5%/ 10% : Sets the ratio of skip when searching for a song in Music Search mode.
PAGE 8
CONTENTS Handling discs Do not touch the recording surface of the disc. ■■ Do not stick tape etc. on the disc, or use a disc with tape stuck on it. ■■ Do not use any accessories for the disc. ■■ Clean the disk by moving the cloth outward from the center of the disc. ■■ Discs that cannot be used This unit can only play the CDs with: ■■ ■■ ■■ A disc that is not round. A disc with coloring on the recording surface or a disc that is dirty. About the Audio file Playable Audio files: MP3 (.mp3), WMA (.
PAGE 9
CONTENTS Getting Started of Bluetooth 4 5 VOICE PAR iPod 6 Press and hold to pairing mode. Easy Pairing function 1 Press and hold to enter easy pairing mode “PAIRING” is displayed. ■■ Any of the following is displayed depending on Bluetooth device registration condition: ––“SEARCHING”: When registering a Bluetooth device for the first time. ––“(device name)”: When a Bluetooth device has already been registered. ––“DEVICE FULL”: When a maximum of five Bluetooth devices have already been registered.
PAGE 10
Operation of Hands-Free Phoning Preparation : You need to register your cell-phone before using it with this unit. (page 16) VOICE PAR iPod ■■ ■■ Press to enter Bluetooth mode. Press to answer an incoming call. Press and hold to memorize the current phone number. ■■ Press briefly to recall memorized phone number. ■■ Making a Call 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select a dialing method, then press to enter. ■■ Operation method of each mode is described below.
PAGE 11
Downloading the Phone Book To download automatically If the cell-phone supports a phone book synchronization function, the phone book is downloaded automatically after Bluetooth connection. ■■ Setting on the cell-phone may be required. ■■ If no phone book data is found in the unit even after the compete display, your cellphone may not support a phone book data automatic downloading function. In this case, try downloading manually.
PAGE 12
CONTENTS Bluetooth Setup Registering a Bluetooth Device (Pairing) Registering from this unit 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to select [PAIRING], then press to enter. 4 Turn the volume knob to select [DEVICE SEARCH], then press to enter. Search for the Bluetooth device. When search is completed, “FINISHED” is displayed. 5 Turn the volume knob to select a Bluetooth device name, press to confirm.
PAGE 13
CONTENTS Bluetooth Setup 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to make a selection, then press to confirm. See table below for selection. Repeat step 3 until the desired item is selected/activated. ■■ Press to return to the previous item. 4 Hold to finish the procedure. ■■ To cancel the Bluetooth mode, press .
PAGE 14
message, then press to confirm. When the [USER] is selected, a message is displayed. Press the volume knob again. 6 Hold to finish the procedure. CONTENTS character. ■■ To move to the column, press 4 / ¢. ■■ To select the character type, press DISP. ■■ To delete the character, press . ■■ To delete the all characters, press and hold . ■■ You can enter alphanumeric characters using the ten keys on the remote controller. ■■ To select the Cyrillic characters, set [RUSSIAN SET] to [ON].
PAGE 15
CONTENTS Function settings Press SRC to select a source other than “STANDBY”. Press the volume knob to enter [FUNCTION] mode. Turn the volume knob to select [AUDIO CONTROL] or [SETTINGS], then press to enter. Turn the volume knob to make a selection, then press to confirm. ■■ See table below for selection. ■■ Repeat step 4 until the desired item is selected/activated. ■■ Press to return to the previous item. 5 Hold to finish the procedure.
PAGE 16
Using the remote controller (KCA-RC405 ; optional accessory) Remote sensor ■■ Do not expose to bright sunlight. VOICE PAR iPod Changing the battery of the remote control unit 2 4 3 1 ¤ Caution: ■■ Do not set the remote control in hot places such as on the dashboard. ■■ Lithium battery. Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. ■■ The battery pack or batteries shall not be exposed to excessive heat such sunshine, fire or the like.
PAGE 17
CONTENTS Installation/connection Part list: A Faceplate....................................................................(×1) B Escutcheon...............................................................(×1) C Mounting sleeve....................................................(×1) D Wiring harness........................................................(×1) E Removal tool........................................................... (×2) F Microphone (3 m).................................................
PAGE 18
CONTENTS Wiring connection Installing the unit FM/AM antenna input (JASO) USB connector 1 AUX input (Stereo) Use the mini-plug (3.5 mm ø) cable which is stereo type and does not have any resistance. R C 1 L Rear output Front output Sub Woofer output B 2 If no connections are made, do not let the wire come out from the tab. 2 Before attaching, make sure the direction of the escutcheon is correct. (Wider hooks on the bottom side.
PAGE 19
Troubleshooting Installing the Microphone Unit 1 Check the installation position of the microphone F. 2 Remove oil and other dirt from the installation surface. 3 Install the microphone. 4 Wire the microphone cable up to the hands-free box with it secured at several positions using tape or the like. ■■ Install the microphone as far away as possible from the cell-phone. F Fix a cable with a commercial item of tape.
PAGE 20
Bluetooth Symptom Remedy/Cause The hands-free talk volume is low. The hands-free talk volume can be adjusted independently. Adjust it during hands-free talk. [MIC GAIN], [NR LEVEL] and [EC LEVEL] of (page 24). No beep is heard at reception of an No beep is heard depending on the type of your cell-phone. The [CALL BEEP] of (page 24) is set ON. ■■ The vehicle window is open.
PAGE 21
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) roducts and batteries with the P symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you.