Manual

14
|
Quick Start Guide
Installing/Removing the unit
Installation
Bend the tabs of the mounting sleeve
with a screwdriver or the like and
attach it in place.
<
• Makesurethattheunitisinstalled
securelyinplace.Iftheunitisunstable,it
maymalfunction(forexample,thesound
mayskip).
Removing the trim plate
 Engagethecatchpinsontheextraction
key(Accessory2)andreleasethetwo
locksontheupperpartofframe.
Liftupandpulltheframeforwardas
showninthefigure.
Catch
Lock
Accessory
2
 Whentheupperpartofframeis
removed,removethelowerpartofframe.
<
• Theframecanberemovedfromthe
bottomsideinthesamemanner.
Removing the unit
 Removethetrimplatewithreferenceto
<Removingthetrimplate>.
 Removethefaceplate.
 Insertthetwoextractionkeys
(Accessory2)deeplyintotheslotson
bothsidesasshown.
 Lowertheextractionkeytowardthe
bottom,andthenpullouttheunit
halfwaywhilepressingtheextractionkey
towardstheinside.
Accessory2
!
• Becarefultoavoidinjuryfromthecatch
pinsontheextractionkey.
 Pulltheunitallthewayoutwithyour
hands,beingcarefulnottodropit.
B59-2186-00_00_13Stepup_QSG_E_En.indd 14 12/12/17 15:06