Manual

English
|
17
Installing the Digital radio antenna
Antenna Installation
 Checktheinstallationlocation.
 Cleantheareawhereantennafilm
(Accessory4),amplifierunit(Accessory
5),andearthsheetarepastedwiththe
includedcleaner(Accessory7).
Thecoatingonthemetalsurfaceneed
notberemoved.
• Waituntiltheglasssurfaceis
completelydrybeforepasting.
• Iftheglasssurfaceiscold,suchas
duringwinter,warmitwithdefrosteror
dryer.
 Removetheseparator(tagI)ofantenna
filmhorizontallyandpastetheantenna
onthefrontglass.
• Removetheseparatorgently.
• Donottouchthepastingsurface
(adhesiveside)oftheantennafilm.
 Removetheseparator(tagII)ofantenna
filmverticallyandpastetheantenna
gentlywhileapplyingpressure.
 Afterpasting,rubtheelementinthe
glasssurfaceinthedirectionofthearrow
showninthefiguretobondit.
 Removetheapplicationfilm(tagIII).
• Donottouchthefeederterminalof
theelement.Also,donotapplyany
glasscleaner.
Feeder terminal
 Matchtheprotrusionoftheamplifier
withthe5ontheantennafilmand
paste.
• Donottouchthefeederterminalor
thepastingsurface(adhesiveside)of
theamplifier.
• When installing the antenna on the
right side
Accessory5
Accessory4
Earth sheet
Match the protrusion with 5
B59-2186-00_00_13Stepup_QSG_E_En.indd 17 12/12/17 15:06