Owner's Manual

The messages shown below display your
systems condition.
TOC
ERROR:
No disc
has
been loaded in
the
disc
magazine.
The
CD
is
quite
dirty. The
CD
is
upside-
down. The
CD
is
scratched a lot.
Bluetooth audio source
KDC-HD545U with KCA-BT200 (Optional)
fJ
The Bluetooth audio player cannot be registered
(pairing).
t/
The
PIN
code
is
fixed.
1&
When a
PIN
code
is
specified in
the
Instruction
Manual for
Bluetooth
Audio Player, register it
with
reference
to
<Registering
PIN
Code> (page
24)
to
register
the
Bluetooth
audio
player. If
no
PIN
code
is
specified in the Instruction Manual,
try
"0000"
fJ
The sound from the Bluetooth audio player
is
discontinuous.
t/
The distance
between
this
unit
and
audio
player
is
too
far.
______
~
~2Y:~
__
~~_~_9..~_(;ti.i?J?J~1~~_!"1~_il!_E'~_
to
this unit.
t/
Another
Bluetooth device
is
affecting
the
Bluetooth
communication.
1&
Turn
off
another
Bluetooth device.
1&
Move
another
Bluetooth device away from this
unit
-i/--Another-siuetooth-de-vic-e-or-prOfile
is
used for
communication.
1&
The
downloading
of
the
Phone
book
or
the
SMS
disconnects
the
sound.
ERROR
05
ERROR
77:
ERROR
99
IN
(Blink)
The disc
is
unreadable.
The unit
is
malfunctioning for some reason.
¢
Press
the
reset
button
on the unit.
If
the
"ERROR
77" code does
not
disappear,
consult your nearest service
center
Something
is
wrong
with
the disc magazine.
Or the unit
is
malfunctioning for some reason.
¢ Check
the
disc magazine. And then press
the reset
button
on the unit.
If
the
"ERROR
99" code does
not
disappear, consult your
nearest service center.
The
CD
player section
is
not
operating
properly.
¢ Reinsert the
CD.
If the
CD
cannot be
ejected or
the
display continues
to
flash
even
when
the
CD
has
been properly
reinserted, please switch
off
the
power
and consult your nearest service
center
PROTECT
(Blink):
The speaker wire
has
a short-circuit or
touches the chassis
of
the vehicle, and then
the protection function
is
activated.
¢ Wire or insulate the speaker cable
properly and press the reset button.
If
the
"PROTECT"
code does
not
disappear,
consult your nearest service center.
NA
FILE:
An
Audio file
is
played
with
a format that this
unit can't support.
COPY
PRO:
A copy-protected file
is
played.
READ
ERROR:
The file system
of
the connected
USB
device
is
broken.
¢ Copy the files and folders for
the
USB
device again.
If
the
error message
is
still
displayed, initialize the
USB
device or
use
other
USB
devices.
NO
DEVICE:
The
USB
device
is
selected
as
a source
although
no
USB
device
is
connected.
¢ Change the source
to
any source
other
than
USB.
Connect
an
USB
device, and
change the source
to
USB
again.
N/A
DEVICE:
An
unsupported
USB
device
is
connected.
Connection
to
the
iPod
has
failed.
¢ Check
that
the
connected iPod
is
an
iPod
that
is
supported.
See
<About
Audio file>
(page
32)
for information on supported
iPods.
English
I
39