Owner's Manual
Table Of Contents
Troubleshooting Guide
NO MUSIC
DATA/ERROR
15
• The connected
USB
device contains
no
playable audio file.
• Media
was
played
that
does
not
have data
recorded
that
the unit can play
TOO
SOFT:
TOO
LOUD
TOO
LONG
VOice
is
too
small and cannot be recognized.
Voice
is
too
large
to
be recognized.
The word
or
utterance
is
too long
to
be
recognized
NO
DATA
NO
ENTRY
NO VOICE
USB
ERROR:
Some trouble may have occurred
to
the
connected
USB
device.
l:
Remove the
USB
device, then cycle the
power
switch
to
ON.
If the same display
is
repeated,
use
another
USB
device.
IPod
ERROR:
Connection
to
the iPod
has
failed.
.:::>
Remove the
USB
device and
then
reconnect it.
.:::.
Confirm that the software for
the
iPod
is
the latest version.
USB
REMOVE
(Blink)
The Remove mode
has
been selected for
the
USB
device/iPod.
You
can remove the
USB
device/iPod
safely.
NO
NUMBER:
•The calling party does
not
notify a caller
ID.
•There
is
no
phone
number
data.
•There
is
no
outgoing
call list.
•There
is
no
incoming
call list.
•There
is
no missed call
list
•There
is
no phone book list.
The cell-phone
has
not
been registered
(pairing).
HF
DISCONCT:
The
unit
cannot
communicate
with
the
cell-
phone.
HF
ERROR
07
The
memory
cannot be accessed.
.:::.>
Turn
off
the
power
and on again.
If
this
message still appears, press
the
reset
button
on the control
unit
HF
ERROR
68
The
unit
cannot
communicate
with
the
cell-
phone.
r~
Turn
off
the
power
and on again. If this
message still appears, press the reset
button
on the control
unit
UNKNOWN The Bluetooth device cannot be detected.
DEVICE
FULL
5 Bluetooth device have already been
registered No more Bluetooth device
cannot
be registered.
PIN
CODE
NG
The
PIN
code
is
wrong.
CONNECT
NG:
The
unit
cannot be connected
to
the
deVice.
NO
PHONEBOOK
Data
is
not
contained
in
the
phone
book.
NO
MESSAGE
No short message
In
In
Box.
NO
RECORD:
The voice tag
is
not
registered in
the
phone
book.
MEMORY
FULL:
The
number
of
voice tags reaches
the
maximum
number
to
be registered in the
phone book.
NO
ACCESS:
The procedure preset
with
mixed preset
memory
function cannot
be
available.
The preset
content
may
not
be recalled
depending
on
the selected band or source.
No call.
MEMORY
FULL:
The tag
memory
of
HD Radio receiver
is
FULL.
iPod
FULL:
The iPod
memory
is
FULL.
NO
TAG
FNC:
iPod
which
does
not
support
the
tag
memory
is
connected.
TAG
ERROR:
The procedure
is
not
registered
to
TAG
Memory
function
N/
A
CHANNELS:
No receivable channel and category.
PAIRING
NG
Pairing error
NO
MATCHING
The voice tag
is
wrong.
VOice
cannot be
recognized because
of
an
unregistered voice
tag, etc.
40
I
KDC-BT645U/
KDC-HD545U