Owner's Manual

14
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
– All the buttons and display flash.
– The unit answers the call automatically if [
AUTO ANSWER ] is set to a selected time. (  15 )
During a call:
– The buttons and display illuminate according to the settings made for [
DISPLAY ]. (  20 )
– If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
To On the faceplate On the remote control
Answer a call
Press
or the volume knob or one
of the number buttons (1 to 6).
Press .
Reject a call
Press
.
Press
.
End a call
Press
or .
Press
.
Adjust the phone volume
[00] to [35] (Default: [15]* )
Turn the volume knob during a call.
• This adjustment will not affect the
volume of the other sources.

Switch between hands-
free and private talk
modes
Press
during a call.
• Operations may vary according to
the connected Bluetooth device.

*
Not applicable for iPhone. During a call, the unit synchronizes the phone volume on the iPhone to the unit.
Improve the voice quality
While talking on the phone...
1 Press the volume knob to enter [ FUNCTION ].
2 Turn the volume knob to make a selection
(see the following table), then press the knob.
3 Repeat step 2 until the desired item is
selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
MIC GAIN –10 — +10 ( –4 ):The sensitivity of
the microphone increases as the number
increased.
NR LEVEL –5 — +5 ( 0 ):Adjust the noise reduction
level until the least noise is being heard
during a phone conversation.
ECHO CANCEL –5 — +5 ( 0 ):Adjust the echo cancellation
delay time until the least echo is being heard
during a phone conversation.
BLUETOOTH®
JS_KWD_KDC_X799_KW_EN_1.indd 14 7/10/2014 12:14:10 PM