Owner's Manual

16
BLUETOOTH®
NUMBER DIAL 1 Turn the volume knob to select a number (0 to
9) or character (
*
, #, +).
2 Press S / T to move the entry position.
Repeat steps
1 and 2 until you finish entering
the phone number.
3 Press the volume knob to call.
(or using RC-406)
1 Press the number buttons ( 0 to 9 ) to enter the
phone number.
2 Press to call.
VOICE Speak the name of the contact you want to call or
the voice command to control the phone functions.
(
 Make a call using voice recognition )
BATT
*
LOW / MID / FULL :Shows the strength of the
battery.
SIGNAL
*
NO SIGNAL / LOW / MID / MAX :Shows the strength
of the current received signal.
*
Functionality depends on the type of the phone used.
Make a call using voice recognition
1
Press and hold to activate the connected
phone.
2 Speak the name of the contact you want to call
or the voice command to control the phone
functions.
• Supported Voice Recognition features vary for
each phone. Refer to the instruction manual of the
connected phone for details.
• This unit also supports the intelligent personal
assistant function of iPhone.
Delete a contact
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select [ CALL HISTORY ], then press the knob.
3 Turn the volume knob to select a contact.
4 Press and hold the volume knob to enter delete mode.
5 Turn the volume knob to select [ DELETE ONE ] or [ DELETE ALL ], then press the knob.
DELETE ONE : Selected name or phone number in step 3 is deleted.
DELETE ALL: All names or phone numbers in [ CALL HISTORY ] in step 2 is deleted.
6 Turn the volume knob to select [ YES ], then press the knob.
7 Press and hold to exit.
• To return to the previous setting item, press
.
• Not applicable for mobile phone that supports PBAP.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [ CALL HISTORY ], [ PHONE BOOK ], or [ NUMBER DIAL ], then
press the knob.
3 Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone number.
4 Press and hold one of the number buttons (1 to 6).
“STORED” appears when the contact is stored.
To erase a contact from the preset memory, select [
NUMBER DIAL ] in step 2 and store a blank
number.
Make a call from memory
1
Press to enter Bluetooth mode.
2 Press one of the number buttons (1 to 6).
3 Press the volume knob to call.
“NO MEMORY” appears if there is no contacts stored.
JS_KWD_KDC_X799_KW_EN_1.indd 16 7/10/2014 12:14:11 PM