Owner's Manual
Table Of Contents
- Instruction Manual
- Reset
- Bluetooth PIN (0000)
- Clock Set
- Demo Mode
- Compatibility
- Bluetooth Profiles
- Table of Contents
- Attaching / Removing Faceplate
- Parts & Controls
- Basic Operation
- Initial Settings Menu
- Radio Operation
- CD / USB / iPod / Android Operation
- Pandora
- iHeartRadio
- SiriusXM Radio (Tuner Required)
- AUX Input
- Bluetooth
- Audio Settings
- Display Settings
- Troubleshooting
- Messages
- Specs
- Installation / Connection
20
DISPLAY SETTINGS
1 Press the volume knob to enter [
FUNCTION
].
2 Turn the volume knob to select [
DISPLAY
], then press the knob.
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Repeat step 3 until the desired item is selected/activated or follow
the instructions stated on the selected item.
5 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
COLOR SELECT VARIABLE SCAN
/
CUSTOM R/G/B
/ preset colors*: Selects your preferred
key and display illumination color.
You can create your own color (when [
CUSTOM R/G/B
] or preset colors* is
selected). The color you have created can be stored in [
CUSTOM R/G/B
].
1
Press and hold the volume knob to enter the detailed color adjustment.
2
Press
S
/
T
to select the color (
R
/
G
/
B
) to adjust.
3
Turn the volume knob to adjust the level (
0
—
9
), then press the knob.
DIMMER ON
:Dims the display and button illumination.;
OFF
:Cancels.
BRIGHTNESS 0
—
31
: Selects your preferred brightness level for display and button
illumination.
TEXT SCROLL AUTO
/
ONCE
:Selects whether to scroll the display information
automatically, or scroll only once.;
OFF
:Cancels.
*
Preset colors:
RED1
/
RED2
/
RED3
/
PURPLE1
/
PURPLE2
/
PURPLE3
/
PURPLE4
/
BLUE1
/
BLUE2
/
BLUE3
/
SKYBLUE1
/
SKYBLUE2
/
LIGHTBLUE
/
AQUA1
/
AQUA2
/
GREEN1
/
GREEN2
/
GREEN3
/
YELLOWGREEN1
/
YELLOWGREEN2
/
YELLOW
/
ORANGE1
/
ORANGE2
/
ORANGERED
AUDIO SETTINGS
LPF SUBWOOFER THROUGH
:All signals are sent to the subwoofer.;
85HZ
/
120HZ
/
160HZ
:Audio signals with frequencies lower than 85Hz/ 120Hz/
160Hz are sent to the subwoofer.
SUB-W PHASE REVERSE
(180°)/
NORMAL
(0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum
performance. (Selectable only if a setting other than [
THROUGH
] is
selected for [
LPF SUBWOOFER
].)
HPF THROUGH
:All signals are sent to the speakers.;
100HZ
/
120HZ
/
150HZ
:Audio signals with frequencies higher than 100Hz/ 120Hz/
150Hz are sent to the speakers.
FADER R15
to
F15
(
0
):Adjusts the rear and front speaker output balance.
BALANCE L15
to
R15
(
0
):Adjusts the left and right speaker output balance.
VOLUME OFFSET
For AUX:
–8
to
+8
(
0
) ; For other sources:
–8
to
0
:Presets the
volume adjustment level of each source. (Before adjustment, select
the source you want to adjust.)
SOUND RECNSTR
(Sound reconstruction)
ON
:Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are
lost in audio data compression.;
OFF
:Cancels.
[
SUB-W LEVEL
]/ [
LPF SUBWOOFER
]/ [
SUB-W PHASE
] is selectable only if
[
SUBWOOFER SET
] is set to [
ON
].
JS_KWD_KDC_X799_KW_EN_1.indd 20 7/10/2014 12:14:12 PM