Owner's Manual
Table Of Contents
- Instruction Manual
- Reset
- Bluetooth PIN (0000)
- Clock Set
- Demo Mode
- Compatibility
- Bluetooth Profiles
- Table of Contents
- Attaching / Removing Faceplate
- Parts & Controls
- Basic Operation
- Initial Settings Menu
- Radio Operation
- CD / USB / iPod / Android Operation
- Pandora
- iHeartRadio
- SiriusXM Radio (Tuner Required)
- AUX Input
- Bluetooth
- Audio Settings
- Display Settings
- Troubleshooting
- Messages
- Specs
- Installation / Connection
ENGLISH
27
Part list for installation
(A)
Faceplate
Wiring connection
Fuse (10๎A)
Rear/ front/ subwoofer output
Antenna terminal
Car fuse box
Car fuse box
Battery
Ignition switch
Blue/White
(Power control wire/
Antenna control wire)
Light blue/yellow
(Steering remote
control wire)
Red
(Ignition wire)
Yellow
(Battery wire)
Black (Ground wire)
To the metallic body or chassis of the car
To the power control terminal when
using the optional power amplifier or
to the antenna control terminal in the
vehicle
Brown
(Mute control wire)
White
Gray
Green
Purple
White/Black
Gray/Black
Green/Black
Purple/Black
To connect the Kenwood navigation system,
refer your navigations manual
To front speaker (left)
To rear speaker (left)
To front speaker (right)
To rear speaker (right)
If no connections are made, do not let the wire come out from the tab.
To the steering wheel remote control
adapter
(C)
Mounting sleeve
(B)
Trim plate
(D)
Wiring harness
(E)
Extraction key
MIC (Microphone input terminal) ( ๎
13
)
To the optional SiriusXM Vehicle Tuner
(commercially available) (
๎
10
)
When connecting to an external
amplifier, connect its ground
wire to the carโs chassis to avoid
damaging the unit.
JS_KWD_KDC_X799_KW_EN_1.indd 27 7/10/2014 12:14:14 PM