Owner's Manual

4
GETTING STARTED
Default: XX
AUDIO CONTROL
SP SELECT
OFF / 5/4 / 6 × 9/6 / OEM : Selects according to the speaker size (5inches
or 4inches, 6×9inches or 6inches) or OEM speakers for optimum
performance.
DISPLAY
EASY MENU
ON :Both display and button illumination change to white color when
entering [
FUNCTION ].; OFF :Both display and button illumination
remain as [
COLOR  SELECT ] color. (  20 )
TUNER SETTING
PRESET TYPE
NORMAL :Memorizes one station for each preset button in each band
(FM1/ FM2/ FM3/ AM).;
MIX :Memorizes one station or SiriusXM channel
for each preset button, regardless of the selected band or SiriusXM
channel.
SYSTEM
KEY BEEP
ON :Activates the keypress tone.; OFF :Deactivates.
SOURCE SELECT
PANDORA SRC
ON :Enables PANDORA in source selection.; OFF :Disables. (  8 )
IHEART SRC ON :Enables IHEARTRADIO in source selection.; OFF :Disables. (  9 )
BUILT-IN AUX ON :Enables AUX in source selection.; OFF :Disables. (  12 )
CD READ 1 :Automatically distinguishes between audio file disc and music CD.;
2 :Forces to play as a music CD. No sound can be heard if an audio file
disc is played.
F/W UPDATE
UPDATE SYSTEM / UPDATE BT / UPDATE HD
F/W UP xx.xx/
F/W UP Vxx
YES :Starts upgrading the firmware.; NO :Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
www.kenwood.com/cs/ce/
CLOCK
CLOCK DISPLAY
ON :The clock time is shown on the display even when the unit is turned
off.;
OFF :Cancels.
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: “CANCELDEMO”
“PRESS” “VOLUMEKNOB”
1 Press the volume knob.
[
YES ] is selected for the initial setup.
2 Press the volume knob again.
“DEMOOFF” appears.
Set the clock
1
Press the volume knob to enter [ FUNCTION ].
2 Turn the volume knob to select [ CLOCK ], then press the knob.
3 Turn the volume knob to select [ CLOCK ADJUST ], then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Day
Hour Minute
5 Turn the volume knob to select [ CLOCK FORMAT ], then press the knob.
6 Turn the volume knob to select [ 12H ] or [ 24H ], then press the knob.
7 Press and hold to exit.
To return to the previous setting item, press
.
Set the initial settings
1
Press to enter STANDBY.
2 Press the volume knob to enter [ FUNCTION ].
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.
To return to the previous setting item, press
.
1
2
3
JS_KWD_KDC_X799_KW_EN_1.indd 4 7/10/2014 12:14:05 PM