KDC-X700 KDC-BT765HD CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D’EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
IC (Industry Canada) Notice This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term “IC: ” before the certification/ registration number only signifies that the Industry Canada technical specification were met.
SOFTWARE LICENSE AGREEMENT The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Article 8 Termination In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.
CONTENTS BEFORE USE BEFORE USE 2 BASICS 3 GETTING STARTED 4 1 Select the display language and cancel the demonstration 2 Set the clock and date 3 Set the initial settings HD RadioTM tuner 5 CD / USB / iPod / ANDROID 7 AUX 9 Pandora® 10 iHeartRadio® 11 SiriusXM® Radio 12 BLUETOOTH® 15 AUDIO SETTINGS 21 DISPLAY SETTINGS 23 REFERENCES 24 Maintenance More information TROUBLESHOOTING 27 INSTALLATION / CONNECTION 30 SPECIFICATIONS 32 IMPORTANT • To ensure proper use, please rea
BASICS Faceplate Remote control (RC-406) Volume knob Display window Remote sensor (Do not expose to bright sunlight.) Pull out the insulation sheet when using for the first time. Detach button Attach Detach How to replace the battery How to reset Press the switch twice within 5 seconds after detaching the faceplate. To On the faceplate On the remote control Turn on the power . Press • Press and hold to turn off the power. Press and hold SRC to turn off the power.
GETTING STARTED 1 Select the display language and cancel the demonstration When you turn on the power for the first time (or [FACTORY RESET] is set to [YES], 5), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB” 1 Turn the volume knob to select [ENG] (English) or [SPA] (Spanish), then press the knob. [ENG] is selected for the initial setup. Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”. 2 Press the volume knob. [YES] is selected for the initial setup. 3 Press the volume knob again.
GETTING STARTED HD Radio™ tuner SYSTEM You can tune in to both conventional and HD Radio broadcasts. • To find HD Radio stations in your area, visit . KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates. SOURCE SELECT PANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables. ( 10) IHEART SRC ON: Enables IHEARTRADIO in source selection. ; OFF: Disables. ( 11) BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables.
HD Radio™ tuner Direct Access Tuning (using RC-406) 1 Press DIRECT to enter Direct Access Tuning. 2 Press the number buttons to enter a frequency. 3 Press to search for a station or channel. or DIRECT. • To cancel, press • If no operation is done for 10 seconds after step 2, Direct Access Tuning is automatically canceled. Default: XX TUNER SETTING IF BAND AUTO: Increases the tuner selectivity to reduce interference noises from adjacent FM stations. (Stereo effect may be lost.
CD / USB / iPod / ANDROID Start playback The source changes automatically and playback starts. Label side M Eject disc USB input terminal USB CA-U1EX (max.: 500 mA) (optional accessory) To On the faceplate On the remote control Playback / pause Press Press Reverse / Fast-forward*4 Press and hold S / T. Press and hold S / Select a track/file Press S / T. Press S / Select a folder*5 Press J / K. Press Repeat play*6 Press repeatedly.
CD / USB / iPod / ANDROID Select control mode While in iPod source, press 5 repeatedly. MODE ON : Control iPod using the iPod itself. However, you can still play/pause, file skip, fast-forward or reverse from this unit. MODE OFF : Control iPod from this unit. While in ANDROID source, press 5 repeatedly. BROWSE MODE : Control Android device from this unit via KENWOOD MUSIC PLAY application installed in the Android device.
CD / USB / iPod / ANDROID AUX Direct Music Search (using RC-406) 1 Press DIRECT. 2 Press the number buttons to enter a track/file number. 3 Press to search for music. Preparation: Select [ON] for [BUILT-IN AUX]. ( 5) Start listening 1 Connect a portable audio player (commercially available). or DIRECT. • To cancel, press • Not available if Random Play is selected. • Not applicable for iPod and ANDROID.
Pandora® Preparation: Install the latest version of the Pandora application on your device (iPhone/ iPod touch), then create an account and log in to Pandora. • Select [ON] for [PANDORA SRC]. ( 5) Create and save a new station . 1 Press 2 Turn the volume knob to select [NEW STATION], then press the knob. 3 Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then Start listening 1 Open the Pandora application on your device. 2 Connect your device to the USB input terminal. press the knob.
Pandora® Delete a station While listening to PANDORA... 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [SYSTEM], then press the knob. 3 Turn the volume knob to select [STATION DEL], then press the knob. 4 Turn the volume knob to select [SORT BY A-Z] or [SORT BY DATE], then press the knob. 5 Turn the volume knob to select the desired station to delete, then press the knob. 6 Turn the volume knob to select [YES], then press the knob. 7 Press and hold to exit. .
iHeartRadio® SiriusXM® Radio Search and store a station . 1 Press 2 Turn the volume knob to select a category, Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com. then press the knob.
SiriusXM® Radio 5 Turn the volume knob to select a channel, then press the knob. (or) Press S / T to search for a channel manually. • Pressing and holding S / T changes the channel rapidly. If a locked channel or a mature channel is selected, a pass code input screen appears. Enter the pass code to receive the channel. ( 14) To change the tuning method for S / T: Press .
SiriusXM® Radio Default: XX TuneScan™ You can get a short preview of the songs that you have missed on each of your SmartFavorite music channels or currently tuned music channel. Press and hold to start scanning the first 6 seconds of the recorded music contents. • To listen to the current song, press the volume knob to stop scanning. The unit continues playing the current song. • To select the previous/next song, press S / T. • To cancel scanning, press and hold the volume knob.
BLUETOOTH® BLUETOOTH — Connection Supported Bluetooth profiles – Hands-Free Profile (HFP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP) Supported Bluetooth codecs – Sub Band Codec (SBC) – Advanced Audio Coding (AAC) – aptX Codec (aptX) Connect the microphone MIC (Microphone input terminal) Microphone (supplied) Rear panel Pair and connect a Bluetooth device for the first time to turn on the unit.
BLUETOOTH® Connect with a remote device by One-touch (NFC) Near Field Communication (NFC) enables short-range wireless communication between the unit and remote devices. By holding an NFC-compatible remote device near to the N-Mark on the unit (volume knob), the unit and remote device proceed to complete pairing and established the BLUETOOTH connection automatically. 1 Activate the NFC function on the remote device. Refer to the instruction manual of the remote device for more information.
BLUETOOTH® To On the faceplate While talking on the first incoming call... Answer another incoming call and hold the current call Press Reject another incoming call Press . . Press . Press . While having two active calls... End current call and activate held call Press Swap between the current call and held call Press Adjust the phone volume [00] to [35] (Default: [15]) Switch between hands-free and private talk modes . . Turn the volume knob during a call.
BLUETOOTH® Make a call NUMBER DIAL 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +). 2 Press S / T to move the entry position. Repeat steps 1 and 2 until you finish entering the phone number. 3 Press the volume knob to call. (or using RC-406) 1 Press the number buttons (0 to 9) to enter the phone number. 2 Press to call. VOICE Speak the name of the contact you want to call or the voice command to control the phone functions.
BLUETOOTH® Default: XX Settings in memory Store a contact in memory You can store up to 6 contacts into the number buttons (1 to 6). 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select [CALL HISTORY], [PHONE BOOK], or [NUMBER DIAL], then press the knob. 3 Turn the volume knob to select a contact or enter a phone number. If a contact is selected, press the volume knob to show the phone number. 4 Press and hold one of the number buttons (1 to 6). “STORED” appears when the contact is stored.
BLUETOOTH® BLUETOOTH — Audio Bluetooth test mode You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device paired. 1 Press and hold . “PLEASE PAIR YOUR PHONE PIN 0000” appears. 2 Search and select this unit model name (KDC-X7 / KDC-BT7 HD) on the Bluetooth device. 3 Operate the Bluetooth device to confirm pairing. “TESTING” flashes on the display. ** ** The connectivity result (OK or NG) appears after the test.
BLUETOOTH® Internet radio via Bluetooth Listen to Pandora You can listen to Pandora on the Android device via Bluetooth on this unit. Preparation: Select [ON] for [PANDORA SRC]. ( 5) 1 Open the Pandora application on your device. 2 Connect your Bluetooth audio player via Bluetooth connection. ( 15) 3 Press repeatedly to select PANDORA. The source switches and broadcast starts automatically. You can operate Pandora in the same way as Pandora for iPod/iPhone.
AUDIO SETTINGS LOUDNESS LEVEL1/ LEVEL2: Selects your preferred low and high frequencies boost to produce a well-balanced sound at a low volume level. ; OFF: Cancels. SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels. FADER R15 to F15 (0): Adjusts the rear and front speaker output balance. BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance. VOLUME OFFSET FRONT (Not applicable for TUNER source, AUX source and SIRIUS XM source.
DISPLAY SETTINGS AUDIO SETTINGS REAR HPF R - HPF FRQ R - HPF SLOPE (Refer FRONT HPF, 22.) R - HPF GAIN SUBWOOFER LPF SW LPF FRQ SW LPF SLOPE 30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ/ 100HZ/ 120HZ/ 150HZ/ 180HZ/ 220HZ/ 250HZ: Adjusts the crossover frequency for the subwoofer (low pass filter). ; THROUGH: All signals are sent to the subwoofer. –6DB/ –12DB/ –18DB/ –24DB: Adjusts the crossover slope. (Selectable only if a setting other than [THROUGH] is selected for [SW LPF FRQ].
REFERENCES DISPLAY SETTINGS Default: XX COLOR SELECT DIMMER VARIABLE SCAN/ CUSTOM R/G/B/ preset colors*: Selects your preferred color for button illumination and display illumination. To make your own color, select [CUSTOM R/G/B]. The color you have made will be stored in [CUSTOM R/G/B]. 1 Press the volume knob to enter the detailed color adjustment. 2 Press S / T to select the color (R/ G/ B) to adjust. 3 Turn the volume knob to adjust the level (0 — 9), then press the knob.
REFERENCES Playable files • Playable audio file: MP3 (.mp3), WMA (.wma), AAC (.aac) • Playable disc media: CD-R/CD-RW/CD-ROM • Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name. • Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device. The AAC (.m4a) file in a USB device or a CD encoded by iTunes cannot be played on this unit.
REFERENCES About HD Radio™ Technology • Adjacent to traditional main stations are HD2/HD3 Channels, providing new original programming on the FM dial. • HD Radio broadcasts deliver crystal clear, CD-like digital audio quality to consumers; eliminates background noise. • Program Info provides song name, artist, station ID, and other relevant data to enrich the listening experience. Source name Change the display information Each time you press DISP, the display information changes.
TROUBLESHOOTING Remedy Symptom Remedy • Adjust the volume to the optimum level. • Check the cords and connections. Correct characters are not displayed (e.g. album name). “MISWIRING CHECK WIRING THEN PWR ON” appears. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. • This unit can only display uppercase letters, numbers, and a limited number of symbols.
TROUBLESHOOTING Pandora “NO DEVICE” or “READING” keeps flashing. • Make sure KENWOOD MUSIC PLAY APP is installed on the Android device. ( 7) • Reconnect the Android device and select the appropriate control mode. ( 8) • If this does not solve the problem, the connected Android device does not support [BROWSE MODE]. ( 25) Symptom • Switch off the developer options on the Android device. • Reconnect the Android device.
TROUBLESHOOTING No Bluetooth device is detected. Bluetooth® Bluetooth pairing cannot be made. Remedy • Search from the Bluetooth device again. • Reset the unit. ( 3) • Make sure you have entered the same PIN code to both the unit and Bluetooth device. • Delete pairing information from both the unit and the Bluetooth device, then perform pairing again. ( 15) Echo or noise is heard during a phone conversation. • Adjust the microphone unit’s position. ( 15) • Check the [ECHO CANCEL] setting.
INSTALLATION / CONNECTION Warning • The unit can only be used with a 12 V DC power supply, negative ground. • Disconnect the battery’s negative terminal before wiring and mounting. • Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit. • Insulate unconnected wires with vinyl tape to prevent a short circuit. • Be sure to ground this unit to the car’s chassis again after installation.
Wiring connection Part list for installation IMPORTANT : We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. (A) Faceplate When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.
SPECIFICATIONS 87.9 MHz — 107.9 MHz (200 kHz space) USB Standard USB 1.1, USB 2.0 (Full speed) Usable Sensitivity (S/N = 26 dB) 8.2 dBf (0.71 μV/75 Ω) File System FAT12/ 16/ 32 Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.
SPECIFICATIONS 50 W × 4 Full Bandwidth Power (at less than 1 % THD) 22 W × 4 Speaker Impedance 4Ω—8Ω Tone Action Band 1: Band 2: Band 3: Band 4: Band 5: Band 6: Band 7: Band 8: Band 9: Band 10: Band 11: Band 12: Band 13: Preout Level/Load (CD) 4 000 mV/10 kΩ Preout Impedance ≤ 600 Ω Operating Voltage 14.4 V (10.
• HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio™ and the HD, HD Radio, and “Arc” logos are proprietary trademarks of iBiquity Digital Corp. • “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
MILITARY Units purchased through the U.S.A. military exchangeservice overseas may be serviced under warranty in the continental U.S.A., subject to the foilowing conditions 1) The original warranty is in effect 2) Proof of purchase is provided to the servicer. WARRANTY FOR MILITARY MARKET Kenwood corporation is proud of the quality andworkmanship of its audio equipment This unit has been properly designed, tested and inspected before it was shlp1J€d to you.
JVCKENWOOD USA Corporation U.S.A. ThiSwarranty will be honored only in the U.S.A. EXCLUSION OF DAMAGES KENWOOD WARRANTY This warranty is enfmceable only by the original purchase1. KENWOOD'S LIABILITY FORANY DEFECTIVE PRODUCT IS LIMITED TOTHE REPAIR OR REPLACEMENT OF THE PRODUCT AT OUR OPTION. KENWOOD SHALL NOT BE LIABLE FOR: 1.
