Owner's Manual

14
Default: XX
CHANNEL LOCK To unlock settings:
1 Turn the volume knob to select a number.
2 Press S / T to move to the entry position.
3 Repeat steps 1 and 2 to enter the current pass code.
(Initial pass code is 0000.)
4 Press the volume knob to confirm.
CODE SET 1 Turn the volume knob to select a number.
2 Press S / T to move to the entry position.
3 Repeat steps 1 and 2 to enter a new 4-digit pass code.
4 Press the volume knob to confirm.
5 Repeat steps 1 to 4 to reconfirm the pass code.
•
Make a note of the new pass code to enter channel lock settings for next time.
LOCK SETTING MATURE CH :Selects the SiriusXM-defined lock setting.; USER DEFINED :Selects
the individual channels the user wants to lock.;
OFF :Cancels.
CHANNEL EDIT
*
1
1 Turn the volume knob to select a category, then press the knob.
2 Turn the volume knob to select a channel you want to lock, then press the
knob.
“L” appears in front of the channel number.
3 Press and hold to exit.
CHANNEL CLEAR
*
1
YES :Clears all the locked channels.; NO :Cancels.
TUNE START
*
2
ON :All qualified music channels in the SmartFavorite will start playback from the
beginning of the song.;
OFF :Cancels.
SIGNAL LEVEL NO SIGNAL / WEAK / GOOD / STRONG :Shows the strength of the current received
signal.
BUFFER USAGE 0% — 100% ( 0 ):Shows the memory usage for Replay buffer.
SXM RESET YES :Resets stored channel and lock setting to default.; NO :Cancels.
*
1
Displayed only when [ USER DEFINED ] is selected.
*
2
Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later that supports SmartFavorites.
SiriusXM® Radio
TuneScan™
You can get a short preview of the songs that you have missed
on each of your SmartFavorite music channels or currently
tuned music channel.
Press and hold
to start scanning the first 6 seconds
of the recorded music contents.
• To listen to the current song, press the volume knob to stop
scanning. The unit continues playing the current song.
• To select the previous/next song, press S/T.
• To cancel scanning, press and hold the volume knob.
Playback returns to the channel before you entered
TuneScan.
SiriusXM settings
1
Press the volume knob to enter [ FUNCTION ].
2 Turn the volume knob to select [ SIRIUS XM ], then press the
knob.
3 Turn the volume knob to select an item (see the following
table), then press the knob.
4 Repeat step 3 until the desired item is selected/activated
or follow the instructions stated on the selected item.
5 Press and hold to exit.
To return to the previous setting item, press
.
JS_KWD_KDC_X700_KW_EN_00_1.indd 14 30/9/2015 4:16:45 PM