Owner's Manual

ENGLISH
23
AUDIO SETTINGS
REAR HPF R - HPF FRQ
(Refer FRONT HPF ,  22 .)
R - HPF SLOPE
R - HPF GAIN
SUBWOOFER LPF SW LPF FRQ
30HZ / 40HZ / 50HZ / 60HZ / 70HZ / 80HZ / 90HZ /
100HZ
/ 120HZ / 150HZ / 180HZ / 220HZ / 250HZ :
Adjusts the crossover frequency for the subwoofer
(low pass filter).;
THROUGH : All signals are sent to
the subwoofer.
SW LPF SLOPE –6DB / –12DB / –18DB / –24DB: Adjusts the
crossover slope.
(Selectable only if a setting other
than [
THROUGH ] is selected for [ SW LPF FRQ ].)
SW LPF PHASE REVERSE (180°)/ NORMAL (0°): Selects the phase
of the subwoofer output to be in line with the
speaker output for optimum performance.
SW LPF GAIN –8 to 0 :Adjusts the output volume of the
subwoofer.
•
[ SUB-W LEVEL ]/ [ SUBWOOFER ] of [ SPEAKER SIZE ]/ [ SUBWOOFER LPF ] of [ X ‘ OVER ] is
selectable only if [
SUBWOOFER SET ] is set to [ ON ]. (  22 )
• [TWEETER] , [REAR HPF] and [SUBWOOFER LPF] of [X ‘ OVER] is selectable only if a setting
other than
[NONE] is selected for [TWEETER] , [REAR] and [SUBWOOFER] of [SPEAKER
SIZE]
. (  22 )
•
Once you have selected the speaker size ( [SPEAKER SIZE],  22 ), the frequency and slope
settings are automatically set for the crossover of the selected speaker.
DISPLAY SETTINGS
Set the dimmer
Press and hold DISP (DIM) to turn on or off the dimmer.
• If you have set [
DIMMER TIME ] (  24 ), it will be canceled once you press
and hold this button.
Other settings
1
Press the volume knob to enter [ FUNCTION ].
2 Turn the volume knob to select [ DISPLAY ], then press the knob.
3 Turn the volume knob to select an item (  24 ), then press the knob.
4 Repeat step 3 until the desired item is selected/activated or follow
the instructions stated on the selected item.
5 Press and hold to exit.
To return to the previous setting item, press
.
:
ZONE 1
ALL ZONE
:
ZONE 2
JS_KWD_KDC_X700_KW_EN_00_2.indd 23 13/10/2015 1:52:18 PM