Owner's Manual

ENGLISH
29
TROUBLESHOOTING
Symptom Remedy
Bluetooth®
No Bluetooth device is
detected.
Search from the Bluetooth device again.
Reset the unit. (
3
)
Bluetooth pairing cannot
be made.
Make sure you have entered the same PIN code to both
the unit and Bluetooth device.
Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. (
15
)
Echo or noise is heard
during a phone
conversation.
Adjust the microphone unit’s position. (
15
)
Check the [
ECHO CANCEL
] setting. (
17
)
Phone sound quality
is poor.
Reduce the distance between the unit and the Bluetooth
device.
Move the car to a place where you can get a better
signal reception.
Voice calling method is
not successful.
Use voice calling method in a more quiet environment.
Reduce the distance from the microphone when you
speak the name.
Make sure the same voice as the registered voice tag is
used.
Sound is being
interrupted or skipped
during playback of a
Bluetooth audio player.
Reduce the distance between the unit and the Bluetooth
audio player.
Turn off, then turn on the unit and try to connect again.
Other Bluetooth devices might be trying to connect to
the unit.
The connected Bluetooth
audio player cannot be
controlled.
Check whether the connected Bluetooth audio player
supports Audio/Video Remote Control Profile (AVRCP).
(Refer to the instructions of your audio player.)
Disconnect and connect the Bluetooth player again.
“DEVICE FULL” The number of registered devices has reached its limit.
Retry after deleting an unnecessary device. (
19
,
DEVICE
DELETE
)
Symptom Remedy
Bluetooth®
“N/A VOICE TAG” Make sure the same voice as the registered voice tag is
used.
“NOT SUPPORT” The connected phone does not support Voice Recognition
feature or phonebook transfer.
“NO ENTRY” / “NO PAIR” There is no registered device connected/found via
Bluetooth.
“ERROR” Try the operation again. If “ERROR” appears again, check if
the device supports the function you have tried.
“NO INFO” / “NO DATA” Bluetooth device cannot get the contact information.
“HF ERROR XX” /
“BT ERROR”
Reset the unit and try the operation again. If this does not
solve the problem, consult your nearest service center.
JS_KWD_KDC_X700_KW_EN_00_1.indd 29 30/9/2015 4:16:50 PM