KDC-C719(KWEW)(EFSP) 2002.10.03 05:26 PM Page 1 KDC-C719 KDC-C669 KDC-C469 COMPACT DISC AUTO CHANGER INSTRUCTION MANUAL CHANGEUR AUTOMATIQUE DE DISQUES COMPACTS MODE D’EMPLOI CAMBIADOR AUTOMATICO DE DISCOS COMPACTOS MANUAL DE INSTRUCCIONES CHANGER AUTOMÁTICO DE CDs MANUAL DE INSTRUÇÕES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new compact disc auto changer.
KDC-C719(KWEW)(EFSP) 2002.10.03 05:26 PM Page 2 Warning /Avertissement /Advertencia /Advertência The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is using laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
KDC-C719(KWEW)(EFSP) 2002.10.03 05:26 PM Page 3 Safety precautions 2WARNING Take the following precautions to prevent fire and avoid personal injury : • Check that no metal objects (coins, tools, etc.) are left inside the unit to avoid short circuits. • If you smell or see smoke, turn the power off immediately and consult your Kenwood dealer. Do Not Use Special Shape CDs • Be sure to use round shape CDs only for this unit and do not use any special shape CDs.
KDC-C719(KWEW)(EFSP) 2002.10.03 05:26 PM Page 4 Précautions de sécurité 2AVERTISSEMENT Pour éviter tout risque de feu et de blessures physiques, observer les précautions suivantes: • Vérifier que l’on n’a pas laissé d’objets métalliques (pièces de monnaie, outils, etc.) à l’intérieur de l’appareil, afin d’éviter les courts-circuits. • Lors d’un dégagement d’odeur ou de fumée, éteindre immédiatement l’appareil et consulter son agent Kenwood. titres.
KDC-C719(KWEW)(EFSP) 2002.10.03 05:26 PM Page 5 Precauciones de seguridad 2ADVERTENCIA Para evitar incendios y daños personales respete las siguientes precauciones: • Para evitar cortocircuitos, verifique que ningún objeto metálico (monedas, herramientas, etc.) quede dentro de la unidad. • Si huele u observa humo, desactive inmediatamente la unidad y consulte con su concesionario autorizado Kenwood. veces desde la unidad de control. No utilizar discos CD de tamaño especial.
KDC-C719(KWEW)(EFSP) 2002.10.03 05:26 PM Page 6 Precauções de Segurança 2ADVERTÊNCIA Tome as seguintes precauções para evitar incêndios e acidentes pessoais: • Para evitar curto-circuitos examine o aparelho para verificar se não foram esquecidos objetos metálicos (moedas, ferramentas, etc.) no seu interior. • Ao sentir cheiro de queimado ou perceber que há fumaça, desligue imediamente o aparelho e consulte o seu concessionário Kenwood. memória.
KDC-C719(KWEW)(EFSP) 2002.10.03 05:26 PM Page 7 Handling compact discs / Manipulation des disques compacts / Manipulación de discos compactos / Manuseando CDs Stains, scratches, or warping can cause skipping, malfunction, or low sound quality. Take the following precautions to avoid damage to the compact discs. • Avoid touching the recorded side (the side without the titles on) when you hold a compact disc.
KDC-C719(KWEW)(EFSP) 2002.10.03 05:26 PM Page 8 Loading compact discs / Chargement des disques / Introducción d Projection Saillie Saliente Saliência ' ' ' 1 2 1. Make sure the disc magazine is the right way up with the "disc" logo on the top. Pull the tray out by the projection. 2. Place the disc on the tray with the label facing upwards. Insert the tray into the disc magazine until it locks. Check that the discs and trays are inserted properly.
KDC-C719(KWEW)(EFSP) 2002.10.03 05:26 PM Page 9 n de discos compactos / Colocando CDs no aparelho "EJECT" ' ' 4 5 6 1. Asegúrese de que el cartucho de discos 1. Certifique-se de que o carregador de discos esté debidamente orientado hacia arriba, con el logotipo "disc" hacia arriba. Extraiga la bandeja por medio del saliente. 2. Coloque el disco en la bandeja con la etiqueta dirigida hacia arriba. Inserte la bandeja en el cartucho de discos hasta que encaje.
KDC-C719(KWEW)(EFSP) 2002.10.
KDC-C719(KWEW)(EFSP) 0 45 90 2002.10.
KDC-C719(KWEW)(EFSP) 2002.10.
KDC-C719(KWEW)(EFSP) 2002.10.
KDC-C719(KWEW)(EFSP) 2002.10.03 05:26 PM Page 14 Troubleshooting Guide / Guide de depannage / Guia Sobre Localización De Averias / Guia de Diagnóstico PROBLEM Sound skips due to vibration. POSSIBLE CAUSE • The unit is mounted at a slant. • Changer unit is mounted in an unstable place. • The angle adjustment switches are set improperly. SOLUTION • Mount the unit so that is level. • Mount the unit in a stable place. • Set the angle adjustment switches to the correct positions.
KDC-C719(KWEW)(EFSP) 2002.10.03 05:26 PM Page 15 Specifications / Spécifications / Especificaciones / Especificações Specifications subject to change without notice. Laser diode ..........................GaAlAs (λ=780 nm) Digital Filter ......................8-Time Over Sampling D/A Converter ..............................................1 bit Spindle speed ....................500 ~ 200 rpm (CLV) Wow & Flutter ..............Below Measurable Limit Frequency Response (±1 dB) ......
KDC-C719(KWEW)(EFSP) 2002.10.