CD-RECEIVER KDC-X889 KDC-MP828 KDC-MP7028 KDC-MP728 KDC-X789 KDC-MP628 INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Contents Safety precautions 4 Notes 5 About CDs 7 About AAC, MP3 and WMA 8 Notes on Multi-function Key System 9 General features Power Selecting the Source Volume Attenuator Audio Control Audio Setup Speaker Setting Subwoofer Output Sound Field Control Sound Management system Equalizer Control WOW Control Bypass Control Memory mode Memory Recall mode Station/Disc Naming (SNPS/DNPS) Theft Deterrent Faceplate Faceplate Angle Adjustment Display Mode Switching Graphic part/ Spectrum Analyzer Display S
Menu system Menu System Security Code Touch Sensor Tone Manual Clock Adjustment Date Adjustment Date Mode Synchronize Clock DSI (Disabled System Indicator) Selectable Illumination Dimmer Switching preout Built-in Amp Setting G-Counter Level set G-Analyzer Reset G-Analyzer Calibration setup G-Analyzer Stop Watch Dual Zone System Setting B.M.S. (Bass Management System) B.M.S.
Safety precautions 2WARNING To prevent injury or fire, take the following precautions: • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • Never watch the G-Analyzer Display screen when you are driving. Otherwise, a car accident may result. 2CAUTION To prevent damage to the machine, take the following precautions: • Make sure to ground the unit to a negative 12V DC power supply.
Notes • If you experience problems during installation, consult your Kenwood dealer. • If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. • Press the reset button if the disc auto changer fails to operate correctly. Normal operation should be restored. Reset button Reset button • We recommend the use of (page 42) to prevent theft. • The characters which can be displayed by ISO 8859-1.
Notes 2Warning About DAB Tuner control 2CAUTION Refer to A group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the control method of DAB Tuner function. However, the following control methods of the function for this unit may be differed from the Instruction manual; therefore, refer to the following supplemental instruction. 1. Select the preset band for Auto Ensemble Memory Entry. 2. Press the [AME] button for at least 2 seconds.
About CDs Handling CDs Removing CDs • Don’t touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. Also, don’t use a CD with tape stuck on it.
About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called Audio file) and the media format has the following limitation. The Audio file, which is out of the specification, may not able to be played normally, or the file and folder names may not be displayed correctly. • Attach the correct extension for the Audio file (AAC: ".M4A", MP3: ".MP3", WMA: ".WMA") • Do not attach the extensions to the other files besides the Audio file.
Notes on Multi-function Key System Multi-function Key System serves to control various functions with the [1] — [6] buttons. The basic operation of the Multi-function Key System is described below. What’s the Multi-function Key System? This unit is equipped with the Multi-function Key System that enables the operation of multiple functions with one button. For example, you can enter the Display Control Mode or turn ON/OFF the Random Play by pressing the [3] button during CD play.
General features ANG ATT Control knob VOL Release button NEXT/ MENU 1–6 SRC ANG ATT Control knob VOL Release button NEXT/ MENU 1–6 SRC Power Volume Turning ON the Power Press the [SRC] button. Increasing Volume Turn the [VOL] knob clockwise. Turning OFF the Power Press the [SRC] button for at least 1 second. Decreasing Volume Turn the [VOL] knob counterclockwise. Selecting the Source Attenuator Turning the volume down quickly. Press the [SRC] button.
1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [VOL] knob. 3 Select the Basic Audio item for adjustment Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below. 4 Adjust the Basic Audio item Turn the [VOL] knob.
General features Function of the KDC-X889/KDC-MP828 3 Select the Audio Setup item for adjustment Audio Control 1 Select the source for adjustment Press the [SRC] button. 4 2 Enter Audio Control mode Press the [VOL] knob. 3 Select the Audio item for adjustment Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below. Turn the [VOL] knob.
Function of the KDC-X889/KDC-MP828 Audio Setup 5 Exit Audio Setup mode Press [VOL] knob for at least 1 second. Setting the Sound system, such as Volume offset and Dual Zone. 1 Select the source for adjustment Press the [SRC] button. Speaker Setting 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item for adjustment Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below. Turn the [VOL] knob.
General features Subwoofer Output Turning the Subwoofer output ON or OFF. Hold down on [AM] of the Control knob for at least 1 second. Each time the button is pressed, Subwoofer output switches ON and OFF. When it’s ON, "SW ON" is displayed. • You can control this item when (page 43) is set to "SWPRE Sub-W". (KDC-MP728/ MP628 only) • You can control this item when Speaker Select Subwoofer of (page 15) is set to any item other than "None".
5 Adjust the Sound Field Control item Push the Control knob to [4] or [¢]. Each time the knob is pushed, the setting switches as shown below.
General features Equalizer Control 1 Select the source for adjustment Press the [SRC] button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "EQ"/"SYS.Q" is displayed above the [3] (KDC-X889/MP828)/[1] (KDC-MP7028/MP728/X789/MP628) button. Refer to (page 9). 3 Enter Equalizer Control mode Press the [3] ("EQ")/[1] ("SYS.Q") button. • When "2 ZONE" of
Function of the KDC-X889/KDC-MP828 WOW Control 1 Select the source for adjustment 6 Exit WOW Control mode Press the [SRC] button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "WOW" is displayed above the [4] button. Refer to (page 9). 3 Enter WOW Control mode Press the [4] ("WOW") button. • When "2 ZONE"of
General features Function of the KDC-X889/KDC-MP828 Memory mode The values of Field Control can be stored in memory. 1 Adjust the item you wish to put in memory By referring to (page 14), (page 15), and (page 16), adjust the item you wish to put in the memory. 2 Select the Preset Memory item section 4 Enter recall mode Press the [1]("CALL") button.
7 Select the characters Push the Control knob to [FM] or [AM]. • Characters can be entered by using a remote with a numbers buttons. Example: If "DANCE" is entered. Character "D" "A" "N" "C" "E" Button [3] [2] [6] [2] [3] Times pressed 1 1 2 3 2 • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached.
General features Display Mode Switching Switching the display mode. • * Function of the KDC-X889/MP828/MP7028/MP728/ X789 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "DISP" is displayed above the [6] (KDC-X889/MP828)/[2] (KDC-MP7028/MP728/X789/MP628) button. Refer to (page 9). 2 Enter display control mode Press the [6]/[2] ("DISP") button. 3 Select the display mode Press the [1] ("MODE") button.
5 Select the graphic/ spectrum analyzer display Press the [3] ("Graph") button. 6 Select the graphic/ spectrum analyzer display part display Push the Control knob to [4] or [¢]. Each time the button is pressed, the graphic display/ spectrum analyzer display switches as shown below.
General features Display Type B In Audio file source Text Display Switching Switching the text display. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "DISP" is displayed above the [6] (KDC-X889/MP828)/[2] (KDC-MP7028/MP728/X789/MP628) button. Refer to (page 9). 2 Enter display control mode Press the [6]/[2] ("DISP") button. 3 Select the display mode Press the [1] ("MODE") button.
6 Select the text display part 1 • * If the contents of the information cannot be displayed, Play time or Frequency is displayed. • *2 Function of the KDC-X889/MP828/X789 • Auxiliary input name is displayed for the Auxiliary input source. • If the text for the Sirius tuner source, including Channel name, etc. is selected when the channel which does not have text for the Sirius tuner source, including Channel name, etc. is played, band & channel number is displayed.
General features The text display in the Upper text display part In Tuner source Information Station name, Program Service name*1 or Frequency Radio text, Program Service name or Frequency (FM)*1 Frequency (FM,AM) Spectrum Analyzer & Clock Date Display "BAND+ch+SNPS" "BAND+ch+FREQ" "Speana/Clock" "Date" Display "Disc Title"*2 "Track Title"*2 "P-Time" "DNPS" "Speana/Clock" "Date" In Audio file source Information Song title & Artist name Album name & Artist name Folder name File name Play time & File numb
The text display in the Middle text display part (Display Type C) In Tuner source Information Spectrum Analyzer & Clock Date Blank Radio text (FM) (KDC-X889/MP828/X789only) Display "Speana/Clock" "Date" "Blank" "Radio Text"* In CD & External disc source Information Spectrum Analyzer & Clock Date Blank Disc title Track title Disc name Display "Speana/Clock" "Date" "Blank" "Disc Title"* "Track Title"* "DNPS" In SIRIUS tuner source Information Spectrum Analyzer & Clock Date Blank Channel Name Song Title Ar
General features The text display in the Lower text display part In Tuner source Information Indicator Spectrum Analyzer & Clock Date Blank Radio text (FM)(KDC-X889/MP828/X789 only) Display "Indicator" "Speana/Clock" "Date" "Blank" "Radio Text"* In CD & External disc source Information Indicator Spectrum Analyzer & Clock Date Blank Disc title Track title Disc name Display "Indicator" "Speana/Clock" "Date" "Blank" "Disc Title"* "Track Title"* "DNPS" In SIRIUS tuner source Information Indicator Spectrum A
Select the Font Color Push the Control knob to [4] or [¢]. G-Counter display Point 7 Exit display control mode Time Press the [6] ("RTN") button. Function of the KDC-X889/KDC-MP828/KDCMP7028/KDC-MP728/KDC-X789 Display Type E G-Analyzer display Switching Switches G-Analyzer display when the Display type is set to "Display Type E". (G: gravity) • Before switching G-Analyzer display, (page 44) and (page 44) are required to be setup.
Tuner features Control knob AUTO /AME SRC 1–6 NEXT Control knob AUTO /AME 1–6 NEXT Band display Preset station number SRC Frequency display ST indicator Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Tuning mode Auto seek Display "Seek Mode Auto 1" Preset station seek "Seek Mode Auto 2" Manual "Seek Mode Manual" Operation Automatic search for a station. Search in order of the stations in the Preset memory.
Example: Desired frequency 92.1 MHz (FM) 810 kHz (AM) Preset Tuning Press button [0], [9], [2], [1] [0], [8], [1], [0] Canceling Direct Access Tuning Press the [DIRECT] button on the remote. Station Preset Memory Putting the station in the memory. 1 Select the band Push the Control knob to [FM] or [AM]. Calling up the stations in the memory. 1 Select the band Push the Control knob to [FM] or [AM]. 2 Select the key function section Press the [NEXT] button.
Function of the KDC-X889/KDC-MP828/KDC-X789 RDS features Control knob AUTO 1–6 Control knob AUTO Band display 1–6 Program Service name Radio text Radio Text Scroll Scrolling the displayed radio text. Hold down on [FM] of the Control knob for at least 1 second. PTY (Program Type) Selecting the Program Type and searching for a station. 1 Enter PTY mode Press the Control knob. "PTY Select" is displayed. • This function can't be used during a traffic bulletin or AM reception.
23. 24. 25. 26. Personality Public College Weather "Personality" "Public" "College" "Weather" Program Type preset Putting the Program Type in the Preset button memory and calling it up quickly. Presetting the Program Type • Speech and Music include the Program type below. Music: No.7 — 19, 21 Speech: No.3 — 6, 20, 22 — 26 • The Program Type can be put in the [1] — [6] button memory and called up quickly. Refer to the (page 31).
CD/Audio file/External disc control features Control knob 1–6 NEXT SRC Control knob NEXT SRC 1–6 Track number Track time IN indicator Playing CD & Audio file When there is no disc inserted 1 Open the panel. Press the [0] button. 2 Insert a disc. • When the faceplate has been slid open, it might interfere with the shift lever or something else. If this happens, pay attention to safety and move the shift lever or take an appropriate action, then operate the unit.
Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display "CD Changer" "MD Changer" Disc player CD changer MD changer Function of disc changer/ Audio file Disc Search/Folder Search Selecting the disc set in the Disc changer or the folder recorded on the Audio file media. Push the Control knob to [FM] or [AM].
CD/Audio file/External disc control features Track/File/Disc/Folder Repeat Random Play Replaying the song, disc in the Disc changer or Audio file folder folder you’re listening to. Play all the songs on the disc or Audio file folder in random order. 1 Select the key function section 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "REP" is displayed above the [4] button. Refer to (page 9).
Function of the KDC-X889/KDC-MP828/KDC-X789 Function of Audio file Disc Random Play Folder number display Displays the number in the folder belonging to the currently selected folder. Playing randomly from all of the Audio files recorded in the disc. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "RDM" is displayed above the [3] button. Refer to (page 9).
CD/Audio file/External disc control features Function of the KDC-X889/KDC-MP828/KDC-X789 Function of ACDrive disc Switching the Play mode Arrange the playing orders of the songs by categories. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "S.MODE" is displayed above the [1] button. Refer to (page 9). 2 Select the Play mode Press the [1] ("S.MODE") button. Each time the button is pressed, the Play mode switches as follows.
SIRIUS tuner control features Control knob AUTO NEXT 1–6 SRC Control knob AUTO NEXT Band display Select SIRIUS Satellite Radio Mode Selecting the SIRIUS Satellite Radio Tuner (optional accessory) connected to this unit. Selecting SIRIUS Mode Press the [SRC] button. Select the "SIRIUS" display. 1–6 SRC Channel number Display "Seek Mode Channel" "Seek Mode Preset" Operation Normal manual seeking control. Search in order of the channels in the Preset memory.
SIRIUS tuner control features Category and Channel Search Selecting the channel and category you want to receive. 1 Enter Category and Channel Search mode Selecting the Preset Band Push the Control knob to [FM]. Each time the knob is pushed, the preset band switches between the SR1, SR2, SR3 and SR4. Press the Control knob. 2 Select the Category Push the Control knob to [FM] or [AM]. • It is the item when the category of Middle text display part is selected.
Channel Scan Every receivable Channel is checked for 10 seconds. 1 Start Channel Scan Press the [AUTO] button for at least 2 seconds. The channel number display blinks. 2 Release it when the song you want to listen to is received Push the Control knob to [4] or [¢]. Text Scroll for SIRIUS tuner source Scrolls the displayed channel name and other items. Hold down on [FM] of the Control knob for at least 1 second. English | B64-2962-00_K_r4_English.Indd 39 39 04.11.
HD Radio control features Control knob MENU SRC Control knob NEXT Band display SRC Frequency display Tuning • When you connect an HD Radio, Tuner features of the unit are disabled and switched to HD Radio tuner features. A portion of the setting methods including the Tuning Mode will change. • With the HD Radio tuner, you can use the similar functions to , , and of Tuner features. Refer to Tuner features for how to use the functions.
Menu system Control knob MENU Control knob MENU Menu display Menu System Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "Menu" is displayed. 4 Exit Menu mode Press the [MENU] button.
Menu system In Standby mode Security Code Because authorization by the Security Code is required when it’s removed from the vehicle, personalizing this unit is by using the Security Code is a help in preventing theft. • The setup Security Code can be done when the (page 50) is set as OFF. • When the Security Code function is activated, the code can’t be changed and the function can’t be released. Note, the Security Code can be set as the 4 digit number of your choice.
2 Enter Date Adjust mode Press the Control knob for at least 1 second. The date display blinks. 3 Selecting the item (day, month, or year) to adjust Push the Control knob to [4] or [¢]. The items that are blinking are items that can be adjusted. In Standby mode DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "DSI : ON" "DSI : OFF" Setting LED flashes. LED OFF.
Menu system In Standby mode Built-in Amp Setting Built-in amplifier is controlled. Turning OFF this control enhances the preout quality. Display "AMP : ON" "AMP : OFF" Setting The built-in amplifier activates. The built-in amplifier deactivates. Function of the KDC-X889/KDC-MP828/KDCMP7028/KDC-MP728/KDC-X789 In Standby mode G-Counter Level set Calibrating G-Counter. Setting the level according to the kinds of vehicles. Setting Counter is easy to go up.
Other than Standby mode/ When the Dual Zone System is ON • Do not use G-Analyzer stop watch on the Public roads. 1 Select G-Analyzer Stop Watch mode Push the Control knob to [FM] or [AM]. Select the "Stop Watch" display. 2 Enter G-Analyzer Stop Watch mode Press the Control knob for at least 1 second. "Stop" is displayed. Dual Zone System Setting Setting the Front channel and Rear channel sound in the Dual Zone System.
Menu system Function of the KDC-X889/KDC-X789 When LX AMP unit connecting AMP Control You can control the LX AMP connected to the unit. 1 Select AMP Control mode Receiving other traffic information stations (In tuner source) Push the Control knob to [4] or [¢]. • Traffic information station switching can be done when listening to the radio. Push the Control knob to [FM] or [AM]. Select the "AMS Control" display. 2 Enter AMP Control mode Press the Control knob for at least 1 second.
4 Exit Receive mode Press the [MENU] button. • Even if the "Auto" setting, and analog broadcast will be received during the reception of a ball game mode (non-delayed broadcast program). 3 Select Auxiliary input display setting mode Push the Control knob to [FM] or [AM]. Select the "Name Set" display. 4 Enter Auxiliary input display setting mode Press the Control knob for at least 1 second. The presently selected Auxiliary input display is displayed.
Menu system In Standby mode 4 Select the downloading mode Built-in Auxiliary input Setting Set the Built-in Auxiliary Input function. Push the Control knob to [FM] or [AM]. Select the "DISP Data DL" display. 5 Enter the downloading mode Display Setting "Built in AUX : OFF" When selecting the source there’s no Auxiliary Input. "Built in AUX : ON" When selecting the source there’s Auxiliary Input. Press the Control knob for at least 1 second. "File Check!!" is displayed.
Function of the KDC-X889/KDC-MP828/KDC-X789 Function of ACDrive disc Voice Index Setting the announcement during the play of AC Drive disc. Display "Voice Index : ON" "Voice Index : OFF" Setting Guide is announced. Not be announced. Function of the KDC-MP7028/KDC-MP728/KDCX789/KDC-MP628 Other than Standby mode Audio Preset Memory Registering the value setup by Sound Control. The memory can't be erased by the Reset button.
Menu system Function of the KDC-MP7028/KDC-MP728/KDCX789/KDC-MP628 Other than Standby mode In Standby mode Audio Preset Call Sets the demonstration mode. Recalling the sound setup registered by
Basic Operations of remote SRC VOL SRC ATT ATT VOL AUD 38 AUD FM+ ¢ 4 FM/AM/+/– AM– 2-ZONE DIRECT /OK ABC DEF GHI JKL MNO PRS TUV WXY 38 4/¢ DIRECT 2-ZONE [0] — [9] QZ R.VOL Loading and Replacing the battery Use two "AA"-size batteries. Slide the cover while pressing downwards to remove it as illustrated. Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. Basic operations [VOL] buttons Adjusting the volume.
Basic Operations of remote Audio Control In Tuner source [AUD] button Select the Audio item for adjustment. [FM]/ [AM] buttons Select the band. Each time the [FM] button is pressed, it switches between the FM1, FM2, and FM3 bands. [VOL] buttons Adjust the Audio item. • Refer to
In SIRIUS tuner source [FM] button Select the preset band. [4]/ [¢] buttons Search up or down channel. [0] — [9] buttons Press buttons [1] — [6] to recall preset channels. [DIRECT] button Enters and cancels the (page 38) mode. In HD Radio source [FM] button Select the HD FM band. Each time the [FM] button is pressed, it switches between the HF1, HF2, and HF3 bands. [AM] button Select the HD AM band. [4]/ [¢] buttons Tune up or down band.
Accessories/ Installation Procedure 2WARNING Accessories If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........1 Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2.
Connecting Wires to Terminals A B KDC-X889/ Subwoofer right output X789/MP828/ (Red) MP7028 Subwoofer left output (White) A Rear right output (Red) Rear left output (White) B KDC-MP728/ Rear right output (Red)/ MP628 Subwoofer right output (Red) Front right output (Red) FRONT Front left output (White) Rear left output (White)/ Subwoofer left output (White) AUX right input (Red) To KENWOOD disc changer/ External optional accessory AUX IN AUX left input (White) To connect these leads, refer to t
Installation non-Japanese cars Japanese cars 1 Refer to the section (page 58) and then remove the hard rubber frame. Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws. T N N T/N T Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
Screwing the Faceplate on the Unit S If you want to fasten the faceplate to the main unit so that it does not fall off, screw in the provided screws in the holes shown below. I u 1 Bottom panel 2 Accessory5 3 • Never insert the screw in any other screw hole than the one specified. If you screw them in another hole, it will contact and may cause damage to the mechanical parts inside the unit. 4 5 • English | B64-2962-00_K_r4_English.Indd 57 57 04.11.
Removing the Unit Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Lock Catch Removing the Unit 1 Refer to the section (page 58) and then remove the hard rubber frame. Remove the screw (M4 × 8) on the back panel. Insert the two removal tools deeply into the slots on each side, as shown.
Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. ? Even if Loudness is turned ON, high-pitched tone isn’t compensated for. ✔ Tuner source is selected. ☞ High-pitched tone isn’t compensated for when in Tuner source. General ? No sound can be heard, or the volume is low. ✔ The fader or balance settings are set all the way to one side.
Troubleshooting Guide Tuner source Disc source ? Radio reception is poor. ✔ The car antenna is not extended. ☞ Pull the antenna out all the way. ✔ The antenna control wire is not connected. ☞ Connect the wire correctly, referring to the section on . ? ? The desired frequency can’t be entered with the Direct Access Tuning. ✔ A station that can’t be received is being entered. ☞ Enter a station that can be received. ✔ You’re trying to enter a frequency with a 0.01 MHz unit.
Audio file source ? ? ? Cannot play an Audio file. ✔ The media is scratched or dirty. ☞ Clean the media, referring to the CD cleaning of the section on (page 7). The sound skips when an Audio file is being played. ✔ The media is scratched or dirty. ☞ Clean the media, referring to the CD cleaning of the section on (page 7). ✔ The recording condition is bad. ☞ Record the media again or use another media. The messages shown below display your systems condition.
Troubleshooting Guide Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. ➪ Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. No Name: Attempted to display DNPS during the CD play having no disc names preset. Waiting: Radio text data is being received.
Specifications Specifications subject to change without notice. FM tuner section Frequency range (200 kHz space) : 87.9 MHz – 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 µV/75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.6 µV/75 Ω) Frequency response (±3.
B64-2962-00_K_r4_English.Indd 64 04.11.