KDC-MPV622H3_U.S 03.7.1 2:19 PM Page 1 CD/MP3 AM/FM RECEIVER INSTRUCTION MANUAL 00271-84000 Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
KDC-MPV622H3_U.S 03.7.1 2:19 PM Page 2 English Contents Warning .......................................3 Safety precautions......................4 Notes on playing MP3 ................6 About CDs...................................8 General features .........................9 Power Selecting the Source Volume System Q Audio Control Speaker Setting Non-fading (Sub woofer) Output Switching Display Station/Disc Naming (SNPS/DNPS) Auxiliary Input Display Setting Theft Deterrent Faceplate Tuner features ...
KDC-MPV622H3_U.S 03.7.1 2:19 PM Page 3 2Warning 2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. KENWOOD CORPORATION 2967-3, ISHIKAWA-CHO, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040.
KDC-MPV622H3_U.S 03.7.1 2:19 PM Page 4 English Safety precautions 2WARNING 2CAUTION To prevent injury or fire, take the following precautions: To prevent damage to the machine, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery, or ground wires, make sure to use automotivegrade wires or other wires with a 0.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 5 NOTE • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. • Press the reset button if the Disc auto changer fails to operate correctly. Normal operation should be restored. Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 6 English Notes on playing MP3 Entering ID3 tag This unit can play MP3(MPEG1, 2, 2.5 Audio Layer 3). Note, however, that the MP3 recording media and formats acceptable are limited. When writing MP3, pay attention to the following restrictions. The Displayable ID3 tag is ID3 version 1.x. For the character code, refer to the List of Codes. Acceptable media The MP3 recording media acceptable to this unit are CD-ROM, CD-R, and CD-RW.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 7 MP3 playing order When a File Search is executed with file ¡$ being played ... When selected for play, Folder Search, File Search, or for Folder Select, files and folders are accessed in the order in which they were written by the CD writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 8 English About CDs Handling CDs CD cleaning CD storage • Don’t touch the recording surface of the CD. Clean from the center of the disc and move outward. • Don’t place them in direct sunlight (On the seat or dashboard etc.) and where the temperature is high. • Store CDs in their cases. Removing CDs • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 9 General features Power Release button SRC ¢ 4 Turning ON the Power Press the [SRC] button. When the power is ON, the (page 22) is displayed as "CODE ON" or "CODE OFF". Turning OFF the Power Press the [SRC] button for at least 1 second. FM AM / NF VOL 38 System Q/ AUD Selecting the Source DISP/NAME.S Press the [SRC] button.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 10 English General features switch as shown below. System Q You can recall the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [System Q] button. Each time the button is pressed the sound setting switches.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 11 Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ALL OFF" display. 2 Enter Speaker Setting mode Press the [System Q] button. 3 Select the Speaker type Press the [4] or [¢] button. Each time the button is pressed the below. Speaker type OFF For 5 & 4 in. speaker For 6 & 6x9 in.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 12 English General features Switching Display Switching the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below.
KDC-MPV622H3_U.S 5 03.7.1 2:20 PM Page 13 Select the characters Press the [FM] or [AM] button. Auxiliary Input Display Setting Selecting the display when this device is switched to Auxiliary input source. Characters can be entered by using a remote with a number buttons. Example: If "DANCE" is entered. Character "D" "A" "N" "C" "E" 6 7 Button [3] [2] [6] [2] [3] Times pressed 1 1 2 3 2 Repeat steps 3 through 5 and enter the name. 1 Select Auxiliary input source Press the [SRC] button.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 14 English General features Theft Deterrent Faceplate 2 The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate 1 Press the Release button. Drop open the faceplate. 2 Drawing the faceplate to left side pull it to the front and remove it. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 15 Tuner features Tuning Mode SRC ¢ Choose the tuning mode. 4 Press the [AUTO] button. Each time the button is pressed the Tuning mode switches as shown below. Tuning mode Display Operation Auto seek "Auto 1" Automatic search for a station. Preset station "Auto 2" Search in order of the stations seek in the Preset memory. Manual "Manual" Normal manual tuning control. FM AM 1–6 AUTO/AME Tuning Selecting the station.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 16 English Tuner features Direct Access Tuning (Function of remote) Entering the frequency and tuning. 1 2 3 Select the band Press the [FM] or [AM] button. Enter Direct Access Tuning mode Press the [DIRECT] button on the remote. "– – – –" is displayed. Enter the frequency Press the number buttons on the remote. Example: Desired frequency Press button 92.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 17 CD/MP3/External disc control features Release button DISC+ DISC– SRC 38 ¢ 4 SCAN RDM REP F.SEL M.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 18 English CD/MP3/External disc control features Playing CD & MP3 When there is no disc inserted 1 Drop open the faceplate Press the Release button. 2 3 Insert a disc. Press the faceplate on the left side, and return it to its former position. 3 • When the faceplate has been dropped open, it might interfere with the shift lever or something else.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 19 • Disc 10 is displayed as "0". • The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. Fast Forwarding and Reversing Fast Forwarding Hold down on the [¢] button. Release your finger to play the disc at that point. Direct Track/File Search (Function of remote) (Direct File Search: Function of MP3) Doing Track/File Search by entering the track/file number.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 20 English CD/MP3/External disc control features Track/File/Disc/Folder Repeat Replaying the song, disc in the Disc changer or MP3 folder you're listening to. Random Play Play all the songs on the disc or MP3 folder in random order. Press the [RDM] button. Each time the button is pressed Random Play turns ON or OFF. When it's ON, "Random ON" is displayed. Press the [REP] button. Each time the button is pressed the Repeat Play switches as shown below.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 21 Text/Title Scroll Scrolling the displayed CD text, MP3 text, or MD title. Press the [DISP] button for at least 1 second. Displays the current folder name. 2 Select the folder level Press the [FM] or [AM] button. With the [FM] button you move 1 level down and with the [AM] button 1 level up. Selecting a folder in the same level Press the [4] or [¢] button.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 22 English Menu system Menu System SRC FM AM ¢ Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 4 1–6 MENU 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Press the [FM] or [AM] button.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 23 Code. "APPROVED" is displayed. The unit can be used. When the Security Code function is activated, the code can't be changed and the function can't be released. Note, the Security Code can be set as the 4 digit number of your choice. 1 2 Enter Standby Press the [SRC] button. Select the "ALL OFF" display. Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "Security" is displayed.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 24 English Menu system DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "DSI ON" "DSI OFF" Setting LED flashes. LED OFF. Illumination Color Setting You can set the display to a desired color. 1 Select Illumination Color Setting Mode Press the [FM] or [AM] button. Select the "COL" display. 2 The color continues to change gradually Hold down on the [4] or [¢] button.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 25 reduce multi-path noise when listening to the FM station. Contrast Adjustment Display "CRSC ON" "CRSC OFF" Adjusting the display contrast. … Display and Setting "Contrast 0" Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF. "Contrast 10" Dimmer Text Scroll Dimming this unit's display automatically when the vehicle light switch is turned ON.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 26 English Basic Operations of remote Loading and Replacing the battery Use two "AA"-size batteries. Slide the cover while pressing downwards to remove it as illustrated. Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. SRC SRC VOL. ATT ATT VOL.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 27 In Tuner source In Disc source [FM]/ [AM] buttons Select the band. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. [4]/ [¢] buttons Doing track/file forward and backward. [4]/ [¢] buttons Tune up or down band. [0] — [9] buttons Press buttons [1] — [6] to recall preset stations. [DIRECT] button Enters and cancels the (page 16) mode. [DISC+]/ [DISC–] buttons Doing disc/folder forward and backward.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 28 Front right output (Red)1 Front left output (White)1 FRONT English Connecting Wires to Terminals 2 KENWOOD disc changer control input To connect the Disc changer, consult your Disc changer manual.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 29 Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. ? ✔ The values of Volume offset are low.24 ☞ Turn up the Volume offset, referring to the section on
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 30 English Troubleshooting Guide Tuner source ? ? Radio reception is poor.39 ✔ The car antenna is not extended. ☞ Pull the antenna out all the way. The desired frequency can’t be entered with the Direct Access Tuning.41 ✔ A station that can’t be received is being entered. ☞ Enter a station that can be received. ? The disc won’t insert.65 ✔ There’s already another disc inserted. ☞ Press the [0] button and remove the disc. ? Direct Search can’t be done.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 31 Troubleshooting Guide The messages shown below display your systems condition. Eject: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.E01 ➪ Load the disc magazine properly. No CD in the unit. ➪ Insert the CD. No Disc: No disc has been loaded in the disc magazine.E02 ➪ Load a disc into the disc magazine. TOC Error: No disc has been loaded in the disc magazine.E04 ➪ Load a disc into the disc magazine.
KDC-MPV622H3_U.S 03.7.1 2:20 PM Page 32 English Specifications Specifications subject to change without notice. FM tuner section Audio section Frequency range (200 kHz space) ............87.9 MHz – 107.9 MHz Usable sensitivity (S/N = 30dB) ..................9.3dBf (0.8 µV /75 Ω) Quieting Sensitivity (S/N = 50dB) .............15.2dBf (1.6 µV /75 Ω) Frequency response (±3.0 dB) ..............................30 Hz – 15 kHz Signal to Noise ratio (MONO) ..............................................
