Operation Manual

Switching the display in the External Display connected.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is displayed above the
[3] button.
Refer to <Notes on Multi-function Key System> (page 8).
2 Enter display control mode
Press the [3] ("DISP") button.
3 Select the display
Press the [5] ("OUT") button.
"DISP Out Select"/"Display Out Select" is displayed.
Each time the button is pressed the display switches.
4 Exit display control mode
Press the [RTN] button.
External Display Switching
— 23 —
Function of the KDC-8024
Selecting the display font color.
1 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "DISP" is displayed above the
[3] button.
Refer to <Notes on Multi-function Key System> (page 8).
2
Enter display control mode
Press the [3] ("DISP") button.
3
Switch the Font color
Press the [4] ("CLR") button.
Repeatedly press the button, nine kinds of Font colors are shown
in turn.
4 Exit display control mode
Press the [RTN] button.
Font Color Select
6 Exit Display Control mode
Press the [RTN] button.
KDC-PSW9524_U.S_r5.pg 02.12.13 2:05 PM Page 23