Operation Manual

The station for the program service name being displayed is
received.
Canceling the SNPP mode
Press the [DNPP] button on the remote.
Displaying the program service name and selecting the station.
1
Enter SNPP mode
Press the [DNPP] button on the remote.
When "SNPP" is displayed, the program service name displays in
the FM1, FM2, FM3 and AM band in order.
For stations without a program service name the frequency is
displayed instead.
Changing the display order
Press the [4] or [¢] button.
Changing the displayed band
Press the [FM] or [AM] button.
2 If the station you want is displayed
Press the [OK] button on the remote.
SNPP (Station Name Preset Play)
(Function of Remote)
Calling up the stations in the memory.
1 Select the band
Press the [FM] or [AM] button.
2 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "[1]" — "[6]" are displayed above
the [1] — [6] buttons.
Refer to <Notes on Multi-function Key System> (page 8).
3 Call up the station
Press the desired [1] — [6] button.
Preset Tuning
— 29 —
KDC-PSW9524_U.S_r5.pg 02.12.13 2:05 PM Page 29