Operation Manual

TEL MUTE
EXT.CONT.
P.CONT
ANT.CONT
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
FRONT
NON
FADING
REAR
English
— 54 —
Front left output (White) 14
Front right output (Red) 13
Non-fading right output (Red) 10
Rear right output (Red) 11
Rear left output (White) 12
Connector Function Guide
Pin Numbers for
ISO Connectors
Cable Colour Functions
External Power
Connector
A–4
A–5
A–6
A–7
A–8
Speaker
Connector
B–1
B–2
B–3
B–4
B–5
B–6
B–7
B–8
Yellow
Blue/White
Orange/White
Red
Black
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Green/Black
Battery
Power Control
Dimmer
Ignition (ACC)
Earth (Ground)
Connection
Rear Right (+)
Rear Right (
–)
Front Right (+)
Front Right (–)
Front Left (+)
Front Left (–)
Rear Left (+)
Rear Left (–)
Battery wire (Yellow) 6
Ignition wire (Red) 7
FM/AM antenna input
2
Antenna Cord (ISO) 3
Antenna Conversion Adaptor (ISO–JASO) (Accessory3) 1
Wiring harness
(Accessory1)
5
Connect to the terminal that is
grounded when either the telephone
rings or during conversation. 24
Power control/ Motor antenna
control wire (Blue/White) 22
Connect either to the power
control terminal when using the
optional power amplifier, or to the
antenna control terminal in the
vehicle. 26
A–7 Pin (Red) 8
A–4 Pin (Yellow) 9
Connector B
Fuse(10A)
4
Connector A
TEL mute wire (Brown) 21
To connect the KENWOOD
navigation system, consult
your navigation manual. 25
External amplifier control wire
(Pink / Black)20
To "EXT.AMP.CONT." terminal of
the amplifier having the external
amp control function. 23
Non-fading left output (White)
To KENWOOD disc changer/
GSM hands free unit/
External optional accessory
To connect these leads, refer to the
relevant instruction manuals. 17
Connecting Wires to Terminals
If no connections are
made, do not let the
cable come out from
the tab. 27a
To External Display/
Steering remote 30
See
page 55
30
KDC-PSW9524_U.S_r5.pg 02.12.13 2:06 PM Page 54